Description
High Performance Ethernet Extender Bridge bi-directional (symmetric) 100/100Mbps Downstream and Upstream Ethernet Extender Solution
Versatek VX-VEB160R4 Ethernet Extender Kit
Each VX-VEB160R4 Point to Point Ethernet Extender Kit Includes :
- Two (2) VX-VEB160R4 Ethernet Extenders – Both a CO & CPE Unit
- Two (2) RJ-45 Ethernet Cables
- 1 Year Manufacture Warranty
The Versa Technology VX-VEB160R4 is a High Performance Ethernet Extender Bridge. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VX-VEB160R4 Ethernet Extender supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 20/4Mbps for 1.4km long range connections.
Implements with Existing Telephone Copper Wires to become a Network Extender
Uses the existing copper wiring! Just plug the VX-VEB160R4 CAT5e Extender into the existing RJ-11 telephone wiring and a high-performance VDSL2 network can be connected. The VX-VEB160R4 LAN Extender is ideal to be used as an Ethernet extender to an existing Ethernet network.
Delivers High-Demand Service Connectivity for ISP / Triple Play Devices by extending Cat5e
The VX-VEB160R4 Ethernet Extenders provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VX-VEB160R4 LAN Extender enables many Multi-Media services to work on local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on.
Easy & Flexible Installation
The Cat5 Extender Bridge is plug-and-play design and fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VX-VEB160R4 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VX-VEB160R4 Ethernet Extender and a CO mode VX-VEB160R4 LAN Extender must be setup as one pair of converters to perform the connection.
Provides Superior Upstream and Downstream Transmission Performance
The VX-VEB160R4 Ethernet Extender also defines symmetric band plan for the transmission of upstream and downstream signals; the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VX-VEB160R4 CAT5e Extender is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VX-VEB160R4 Cat5 Extender is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance.
Application – Ethernet Extender
Two VX-VEB160R4 Ethernet Extender acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. The solution listed below is typical application for the Ethernet over VDSL2 Bridge.
MTU / MDU / Hospitality LAN Extender Solution
The VX-VEB160R4 Ethernet Extender is a perfect solution to quickly provide cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided.
Last Mile of FTTx Deployment
The VX-VEB160R4 Network Extender is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps ports of VX-VEB160R4 Network Extender can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house could use the existing phone line to transmit data through the Internet and the whole building could share the Internet to the wider area network with minimum cost.
VX-VEB160R4 Ethernet Extender Kit Product Features
Ports
- 10/100Base-TX 4 RJ-45, Auto-Negotiation and Auto-MDI/MDI-X
- VDSL1 RJ-45, female Jack
Functionality
- CO / CPE mode select
- Selectable fast and interleaved mode
- Selectable target 17a / 30a profiles
- Selectable target SNR mode
Encoding
- VDSL-DMT
- – ITU-T G.993.1 VDSL
– ITU-T G.997.1
– ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
LED Indicators
- 1 Power
- 4 for RJ-11/VDSL2
- 1 for per RJ-45 10/100Base-TX Port
Cabling Type
- Ethernet
- – 10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft)
– 100Base-TX: 2-pair UTP Cat.5, up to 100m (328ft) - VDSL
- – Twisted-pair telephone wires (AWG24 or better) up to 1.4km
Dip Switch
- 4 position DIP switch
Performance
17a Profile
300m -> 99/70Mbps
400m -> 99/60Mbps
600m -> 90/45Mbps
800m -> 50/28Mbps
1000m -> 40/12Mbps
1200m -> 20/7Mbps
1400m -> 20/4Mbps
30a profile
300m -> 100/100Mbps
400m -> 90/90Mbps
600m -> 69/55Mbps
800m -> 48/9Mbps
We strongly recommend the following product to protect your network and investment.
You can click on any of the links below to view the product information, and download the 552-D2 User Guide.
Clicking on the link below will open a new window
Reviews
There are no reviews yet.