DrayTek Vigor 2930n Dual WAN Security Router Wireless 802.11n

The Draytek Vigor2930n is a Dual WAN router with policy-based load balance, fail-over and BoD (Bandwidth on Demand), and wireless 802.11n; it also features advanced bandwidth control mechanisms such as IP-layer QoS, NAT session limitation, bandwidth borrowed, etc., to allow easy, flexible and reliable access control and bandwidth management.

The Vigor 2930n SPI (Stateful Packet Inspection) firewall uses object-based design to make settings of firewall policies easy. The CSM (Content Security Management) feature enables more precise and efficient access control for IM (Instant Messenger) and P2P (Peer to Peer) applications. Furthermore, functions such as DoS / DDoS (Denial of Service / Distributed DoS) and URL / Web content filtering minimize security threats both inside and outside the network.

With hardware-based implementation of the VPN protocols, the Draytek Vigor 2930n supports up to 100 VPN tunnels in compliance with advanced protocols such as IPSec / PPTP / L2TP / L2TP over IPSec with AES / DES / 3DES for encryption and MD5 / SHA-1 for authentication.

The DrayTek Vigor2930n conforms to IEEE 802.11n Draft-n standards. Supporting WEP / WPA / WPA2 encryption, MAC address control, wireless LAN isolation, wireless VLAN and 802.1X authentication. The wireless rate control function can adjust the data rate of each wireless station (client). WDS can help users to extend wireless coverage easily.

The DrayTek Vigor 2930 “Vn” (Vigor2930Vn) model incorporates twin analog phone ports.

Dual WAN Application
It allows users to access Internet and combine the bandwidth of the dual WAN to speed up the transmission through the network. Each WAN port can connect to different ISPs, Even if the ISPs use different technology to provide telecommunication service (such as DSL, Cable modem, etc.). If any connection problem occurred on one of the ISP connections, all the traffic will be guided and switched to the normal communication port for proper operation.
 

Firewall & VPN Application
The SPI ( Stateful packet Inspection ) firewall uses object-based design to make settings of firewall policies easy. The CSM ( Content Security Management ) feature enables more precise and efficient access control for IM ( Instant Messenger ) and P2P ( Peer to Peer ) applications. Furthermore, functions such as DoS / DDoS ( Denial of Service / Distributed DoS ) and URL / Web content filtering minimize security threats both inside and outside the network.

With hardware-based implementation of the VPN protocols, the Vigor2930n supports up to 100 VPN tunnels in compliance with advanced protocols such as IPSec / PPTP / L2TP / L2TP over IPSec with AES / DES / 3DES for encryption and MD5 / SHA-1 for authentication.

Specifications
Dual-WAN

• Outbound Policy-Based Load-Balance
• BoD (Bandwidth on Demand)
• WAN Connection Fail-over

Wireless Access Point

• IEEE 802.11n Compliant
• Wireless Client List
• Access Point Discovery
• WDS ( Wireless Distribution System )
• Wireless LAN Isolation
• Wireless Rate-Control
• 64 / 128-bit WEP
• WPA / WPA2
• 802.1X Authentication with RADIUS Client *
• Hidden SSID
• Multiple SSIDs
• MAC Address Access Control

WAN Protocol

• DHCP Client
• Static IP
• PPPoE
• PPTP
• BPA
• L2TP *

Firewall

• CSM ( Content Security Management ) for IM / P2P Applications
• Multi-NAT, DMZ Host, Port-Redirection and Open Port
• Policy-Based Firewall
• MAC Address Filter
• SPI ( Stateful Packet Inspection )
• DoS / DDoS Protection
• IP Address Anti-spoofing
• E-Mail Alert and Logging via Syslog
• Bind IP to MAC Address

VPN

• Up to 100 VPN Tunnels
• Protocol : PPTP , IPSec , L2TP , L2TP over IPSec
• Encryption : MPPE and Hardware-Based AES / DES / 3DES
• Authentication : Hardware-Based MD5 , SHA-1
• IKE Authentication : Pre-shared Key and Digital Signature ( X.509 )
• LAN-to-LAN , Teleworker-to-LAN
• DHCP over IPSec
• NAT-Traversal ( NAT-T )
• Dead Peer Detection ( DPD )
• VPN Pass-Through

Quality of Service

• QoS
  • Guarantee Bandwidth for VoIP
  • Class-based Bandwidth Guarantee by User-Defined Traffic Categories
  • DiffServ Code Point Classifying
  • 4-level Priority for each Direction ( Inbound / Outbound )
  • Bandwidth Borrowed
• Bandwidth / Session Limitation

Network Management

• Web-Based User Interface ( HTTP / HTTPS )
• Quick Start Wizard
• CLI ( Command Line Interface, Telnet / SSH )
• Administration Access Control
• Configuration Backup / Restore
• Built-in Diagnostic Function
• Firmware Upgrade via TFTP / FTP
• Logging via Syslog
• SNMP Management MIB-II

Content Filter

• URL Keyword Blocking ( White List and Black List )
• Java Applet , Cookies , Active X , Compressed , Executable , Multimedia File Blocking
• Web Content Filter ( SurfControl )
• Time Schedule Control

Network Features

• DHCP Client / Relay / Server
• Port-based VLAN
• Dynamic DNS
• NTP Client
• Call Scheduling
• RADIUS Client
• DNS Cache / Proxy
• UPnP
• Routing Protocol
  • Static Routing
  • RIP V2

Opens in a New Window

Also Available
– DrayTek Vigor 2930
– DrayTek Vigor 2930Vn with Wireless 802.11n and VoIP

ORDERING INFORMATION