Description
The FOI-2191 and FOI-2911 both provide complete electrical isolation for RS- 232 communications. For compatibility with MIL-STD-188C, the transmit and receive data (TD and RD) can be inverted through either unit by a switch. The units are transparent to all handshaking protocols and can accept data and clock signals up to a maximum rate of 128 kbps. A regeneration switch on the FOI-2191 allows users to toggle between synchronous applications that require Send Timing (ST) and asynchronous or synchronous applications that require Terminal Timing (TT). They support tail circuit and null modem functions for DCE to DCE or DTE to DTE communications. This requires two of the same FOI units. An alternate interface (V.35 or RS-422) may be installed at the opposite end, allowing the user to create a link between two electrically incompatible interfaces without requiring a separate interface converter.
The units can be used in areas of high electrical noise or in and out of RF shielded enclosures. The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. Privacy of communications is also enhanced because the fiber optic cable does not radiate any emissions. FiberPlex recommends “R” units for high security applications because they have added filtering and shielding for RFI suppression. In addition, fiber optic cable offers much longer transmission distances than traditional RS-232 cabling. Multimode optics on the units can extend the distance to 2km, while singlemode optics can further extend the distance to 20km. A typical link consists of an FOI-2191 at the Data Communication Equipment (DCE) and an FOI-2911 at the Data Terminal Equipment (DTE) with a duplex fiber optic cable between them.
FLEXIBLE MOUNTING AND POWERING OPTIONS
The FOI-2192 and FOI-2911 are part of the FOI line of products designed for ruggedized mil applications. They are housed in the familiar FOI shielded can enclosure. For standalone applications they can be powered by adding a PSQ-2909 AC supply or a PSQ-2920 DC power supply (not included). Optionally, up to 8 FOI units can be mounted on CMA chassis adapters and installed in an RMC-3101 or RMC-2101 rack mount chassis. The units are powered redundantly by a common back plane connection.
Reviews
There are no reviews yet.