Loading...
Positron BRX-XLR-24 - IP65 sealed enclosure (BRX-XLR-24) with a 24-pair shelf (BRX-24S) and 12 BRX-XLR-M modules (total 24 ampli

Positron BRX-XLR-24 – IP65 sealed enclosure (BRX-XLR-24) with a 24-pair shelf (BRX-24S) and 12 BRX-XLR-M modules (total 24 ampli

SKU: 1801 Categories: ,

$4,455.00

Description

The BRX-XLR-24 holds 12 BRX-XLR 2-pair modules (with primary lightning protection) for a total of 24 ports / copper pairs. The BRX-XLR-24 comes with a pair of standard 25-pin Amphenol connectors (24 pairs) from the CO/DSLAM and 24 pairs toward the subscriber CPE devices. It includes an optimal pole-mount bracket.

The Broadband Reach Extender – eXtra Long Reach (BRX-XLR) is a fully integrated solution that extends the reach of deployed ADSL2+/ ADSL DSLAMs or MSANs to deliver at least 10 Mbps per pair to subscribers at 17,000 feet (5.2 km) on 24 AWG copper pairs in underserved or unserved markets. An increase in the available bandwidth capacity on existing last mile infrastructure results in higher ARPU, lowered attrition and increased customer satisfaction.

The BRX-XLR offers “new life” for installed DSLAMs and the ‘last mile’ of copper with an optimal way to deliver higher speed services. Broadband Service operators can instantly provide higher bandwidth to subscribers without the heavy expenditures of bringing Fiber to the Home (FTTH).

BRX-XLR diagram

Additional information

Weight 0.00 lbs
Dimensions 0.00 × 0.00 × 0.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

BRX-XLR Features:

  • High performance and cost effective subscriber loop extension
  • Re-use existing right-of-way and eliminate complex civil engineering work
  • Strict adherence to ADSL2+ / ADSL Standards
  • Extended operating temperature
  • Powered from sealing current (max 2mA or 100mW per pair)
  • Flexible packaging options (1, 2, 8, 24 and 48 pairs)
Feature Description
xDSL Standards ITU G.992.5 ADSL2+ Annex A, ITU G.992.3 ADSL2 Annex A, ITU G.992.1 ADSL Annex A
Reach Improvement Extends ADSL/ ADSL2/ ADSL2+ broadband CSA coverage up to two times its current value
Rate Improvement Improves effective bandwidth for ADSL/ ADSL2/ ADSL2+ loops up to five times
PSD Mask Compliance Compliant with ANSI T1.413 and ETSI TS 101 830-1
Signal to Noise Ratio Improves the Signal to Noise Ratio (SNR)
Power Draw Maximum power drawn is 100 mw per pair from the 48V sealing current from the CO or DSLAM/ MSAN
Enclosure Flexible shelf design allows more subscribers to be added in the future
Over-current Protection 8/20 µsec, 10 kA (1 operation), 10/700 µsec, 6 kV, 300A (50 operations)
Regulatory Compliance Tested to IP65, UL/CSA and FCC part 15 Class A, WEEE and ROHS compliant
Operating Temperature  -40 to +65 °C
Relative Humidity  5% to 95%, non-condensing
Dimensions  
  BRX-XLR-M: 8” x 5” (203 mm x 127 mm)
  BRX-XLR-1: 9.25” x 5.5” x 1.5” (235 mm x 140 mm x 38 mm)
  BRX-XLR-2: 9.25” x 5.5” x 1.5” (235 mm x 140 mm x 38 mm)
  BRX-XLR-8: 11.5” x 5.5” x 4.7” (292 mm x 140 mm x 120 mm)
  BRX-XLR-24: 21.5” x 17” x 11” (546 mm x 432 mm x 280 mm)
Installation Location Installed adjacent to a splice point or cross connect cabinet in the outside plant (OSP), No equipment needed in the Central Office / Exchange
Auto-Provisioning  Automatic gain control with no software or hardware configuration, self-adjusts based on loop length and line conditions between the DSLAM and the CPE
Number of Ports per Module Each BRX-XLR-M module incorporates two (2) independent copper pairs, 100% transparent to pair bonding (if used)
Part Number Description
BRX-XLR-24 IP65 sealed enclosure (BRX-24-C) with 24-pair shelf (BRX-24S) and 12 BRX-XLR-M modules (total of 24 amplified ADSL2+ pairs)