FiberPlex HDMI 1.4 HD Video Receiver SFP SFP-HHDVR1-0000-M

SKU: 1446 Category:




The SFP-HHDVR1-0000-M is an electrical SFP receiver module designed to convert HDMI/DVI (High definition multimedia

interface®) to an SDI signal output without scaling artifacts. The SFP-HHDVR1-0000-L enforces HDCP, therefore the unit will not pass protected content. Up to 8 channel of audio is supported and de-embedded from the HDMI signal.

The SFP-HHDVR1-0000-M provides module identification information, configuration and diagnostic monitoring through a 2 wire serial interface. It is also a hotpluggable solution for field system upgrade and maintenance.

The SFP-HHDVR1-0000-M is interchangeable with other MSA optical video SFP, coaxial SFP and SFP converter improving product flexibility. Ganged cages, belly-to-belly and superposed cages mounting are supported. The module provides reduced development risk and cost.

The SFP-HHDVR1-0000-M is Pb-free and ROHS compliant.

Additional information

Weight 5.00 lbs
Dimensions 5.00 × 5.00 × 5.00 in


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.


  • SMPTE 424M, 292M and 259M compliant
  • Supported format:
    • 25/625,
    • 720p/1080i (50/59.94/60Hz),
    • 1080p (23.98/24/15/29.97/30/50/59.94/60Hz)
  • HDMI/DVI Input:
    • 24 bit (3×8 bits)
    • RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4
    • BW = 150Mhz
    • RGB Range (Full/SMPTE)
    • Up to 8 channel audio de-embedding (PCM)
    • HDMI 1.4 Type D connector
    • HDMI Type D plug with retention
    • HDCP supported
  • Control via serial interface including:
    • Voltage & Temperature Monitoring
    • HDMI/DVI interface configuration
    • EDID reading, Audio mapping
    • Module Information

Ordering Information


SFP-HHDVR1-0000-M HDMI 1.4 HD Video Receiver SFP


  • Low Power Consumption Single Supply +3.3V
  • 58.5mm x 13.4mm x 8.6mm SFPPackage
  • Operating temperature: 0°C to 70°C