CALL US :1 (888)-4WAN-LAN

Enable-IT 865 PRO PoE Extender Kit - Gigabit PoE 2 ~ 4 Port PoE over 4-pair wiring[865 PRO]

Enable-IT 865 PRO PoE Extender Kit - Gigabit PoE 2 ~ 4 Port PoE over 4-pair wiring[865 PRO]

$554.40
Quantity :

The Enable-IT™ 865 PRO Gigabit PoE Extender kit is an ideal solution to install your IP surveillance cameras, WiFi access points, VoIP phones and other PoE devices where you need, not where you are limited to by false thinking LAN distance restrictions. It can operate up to 3,500ft / 1,066m from you power and data source and supports any PoE enabled WiFi Wireless Access Point, Security camera or other PoE powered equipment. This eliminates the need for your installers adding power supply outlets and associated AC power cabling, providing an affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.

 

Using the provided High Powered 61W 56V Gigabit PoE Injector, a single (120V ~ 240V) IEC 320 C14 standard Country specific power cord input will deliver PoE power sufficient enough to deploy multiple 12V ~ 24V / 6W ~ 30W PoE devices anywhere you need to.

Keep in mind that all DC including (PoE) voltage drops over distance and thicker gauge wire will help this issue. As a rule of thumb you will lose up to 6V per every 200 feet of wiring, depending on the gauge. For example in Category 5 or 6 24 AWG there is less wire/copper to conduct electricity which is lower power strength at distance due to impedance. Lower power strength increases the amperage and that generates more heat in the wire. Depending on distance, you may need to use more pairs or wire or 18 gauge wiring as a dedicated DC power buss – like low voltage landscape wire and run Ethernet on a 1-pair 24 AWG. There are options to maximize your distance and PoE output when used in conjunction with our PoE Extenders or PoE DSLAM that can power a 56V 60W PoE IP PTZ Camera at 4,000 ft away.

 

  •  Extended Ethernet with Power over Ethernet (PoE ) on 2, 3 or 4 pair existing Telephone wiring or category rated wiring.
  •  Rapid LAN style installation RJ45 jacks – no programming required.
  •  Ruggedized Professional Business Grade mountable casing for harsh environments.
  •  Network Equipment independence – Transparent to protocols, applications and MAC addresses.
  •  Longest warranty protection included exceeding any knockoff competitors.
  •  Quad Gigabit LAN ports on each end to eliminate the need for LAN switches.

Power

  • CO unit – 12V-1A DC Country Specific (120-260V AC) Power Adapter 2.5mm DC jack included.
  • CPE unit – remote self powered uses 5v and passes remaining PoE budget to end PoE device

 

 

Data Rate

  • 1,000Mbps full-duplex Ethernet Data
  • 260Mbps Interconnect throughput
  • Ethernet LAN Protocol Independent
  • Ethernet LAN MTU 1500
  • IP VLAN passthough

 

Interface

  • Ethernet: (4) LAN RJ-45 Standard 10/100/1000 Base-TX autosensing ports
  • Interlink: RJ-45 (2-Pair min)
  • Optimal power at distance, use 4-pair Cat5e or better wiring.

 

Dimensions

  • Height 1.4″ (35mm) Depth 3.4″ (86mm) Width 4.4″ (111mm)

 

Environment

  • Operational Temperature: -49°F to 168°F (-45°to 76°C)
    Humidity: 5% to 95%, non-condensing

 

Enclosure

  • Ruggedized wallmount black Aluminum casing Optimized for heat extraction and isolation without fans.
Model Name Description
865 PRO Gigabit PoE Extender
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search