CALL US :1 (888)-4WAN-LAN

DrayTek VigorSwitch P1100[VigorP1100]

DrayTek VigorSwitch P1100[VigorP1100]

$225.88
Quantity :

DrayTek VigorSwitch P1100

The VigorSwitch P1100 is ideal for SOHO and small business with the high-performance capability and IPv6 management. To cater for high bandwidth traffic, it is equipped with 8 Gigabit Ethernet ports for the LAN side, and 2 SFP ports for the backbone side. VigorSwitch P1100 is equipped with extensive facilities for maximizing your LAN performance, VLAN capability to allow flexible network design, and QoS capability for flexible bandwidth control. Furthermore, the power saving by IEEE802.3az EEE can offer you a green Ethernet networking environment.

The VigorSwitch P1100 also offers power to all these ports with Power of Ethernet (PoE) capability. All PoE-enabled devices for the business usages, such as IP phones, wireless AP or IP Cameras can all rely on VigorSwitch P1100 switch for the power supply, you are free to position equipment wherever they should be, not being limited by the power outlet.

 

Model

VigorSwitch P1100

GbE. LAN

X

PoE

 XMax. 120W

SFP

X

 

FEATURES

IP Version 

  • IPv4
  • IPv6

 

Standard Compliance 

  • IEEE 802.3 10Base-T
  • IEEE 802.3u 100Base-T
  • IEEE 802.3ab 1000Base-TX
  • IEEE 802.3x Flow Control Capability
  • ANSI/IEEE 802.3 Auto-negotiation
  • IEEE 802.1q VLAN
  • IEEE 802.1p Class of Service
  • IEEE 802.1d Spanning Tree
  • IEEE 802.1w Rapid Spanning Tree
  • IEEE 802.3ad Port Trunk with LACP
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
  • IEEE 802.1az Energy Efficient Ethernet

 

VLAN

  • IEEE802.1Q Tag-based VLAN
  • Support Port-based VLAN
  • Support Static VLAN
  • Port Isolation
  • Management VLAN
  • Voice VLAN (OUI Mode)

 

QoS

  • Support 8 Queues
  • Rate limit
    • Port-based (Ingress/Egress)
  • Queue Setting
    • WRR
    • Strict Priority
  • Class of Service
    • Port-based
    • CoS
    • DSCP
    • CoS-DSCP
    • IP Precedence

 

Link Aggregation

  • Supports 8 Link Aggregation Groups with Static & LACP types
  • Up to 8 Ports for Each Group
  • Support Traffic Load Balancing 

 

Management

  • Support SNMP v1/v2c
  • Firmware Upgrade/Backup via HTTP/TFTP
  • Support HTTP/HTTPs Web User Interface
  • Configuration Upgrade/Backup via HTTP/TFTP
  • Factory Default
  • System Reboot
  • Support Command Line Interface (CLI) via Telnet

 

POE

  • Dynamic (None Priority class Base)
  • Static (Priority Base)

 

Security

  • Supports Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
  • DoS attack prevention

 

Account Management

  • Multiple user Account
  • Two-Level Security (Admin/User)

 

Network

  • Up to 8K MAC Address Table
    • Dynamic Address
    • Static Address
  • Support Jumbo Frame 10KBytes
  • Support STP and RSTP
  • Support SNTP

 

 

Specification

Hardware Interface
  • 8 x 10/100/1000Base-T with PoE+ PSE, RJ-45 (each port can support both IEEE 802.3af / 802.3at mode)
  • 2 x 100/1000 SFP Port
  • 1 x Factory Reset Button
Operation Voltage 100~240 VAC 
Power Consumption 12.16Watt
PoE Power Budget 120 Watt (up to 30Watt per port)
Temperature Operating : 0 ~ 40?
Storage: -20 ~ 70?
Humidity 5% ~ 90% ( non-condensing )
Dimensions 266(L) x 185(W) x 44(H) mm
Weight 1.4 kg


Ordering Information

Model Name Description
VigorP1100 POE Switch
Customers who bought this product also purchased