CALL US :1 (888)-4WAN-LAN

DATA CONNECT 5204V-BM 4-PORT VDSL2 BRIDGE MODEM[5204V-BM]

DATA CONNECT 5204V-BM 4-PORT VDSL2 BRIDGE MODEM[5204V-BM]

$150.00
Quantity :

DCE 5204V-BM VDSL2 High Speed Extended Reach VDSL2 Bridge Modem 2Pack is perfect for Very High-speed Connectivity Internet Access, IPTV service applications, hospitality, Point-to-Point and MDU / MTU applications.

The DCE/5204V-BM is a single VDSL2 port modem equipped with four Ethernet ports by embedded 10/100Mbps Ethernet Switch. Compliant with ITU-T G.993.2 VDSL2 standard, the DCE/5204V-BM supports the highest rate of up to 100Mbps/100Mbps in VDSL2 Profile (30a) with a 6-band solution.

Since VDSL2 has the characteristics of faster rates over shorter distances, the DCE 5204V-BM provides the ideal architecture for Telecoms to use fiber optic lines as the backbone and a VDSL2 line as the last mile into the home or office.

VDSL2 operates over copper wires so that telecom operators can provide bundled services to end-users similar to those that cable operators offer. With outstanding throughput, the DCE 5204V-BM complements fiber networks in offering the best solution for delivering IPTV or home entertainment services.

The DCE/5204V-BM also supports both central office (CO) and customer-premises equipment (Remote/CPE) modes for back-to-back applications.

In addition to forwarding Ethernet packets between VDSL2 port and Ethernet ports, the DCE 5204V-BM also provides Hardware IGMP snooping for IGMP v1/v2 to facilitate IPTV services without interfering with other applications.
 

Key Features
  • Compliant with ITU-T G.993.2 VDSL2 Standard
  • VDSL2 Profiles: 8a/b/c/d, 12a/b, 17a, 30a
  • Band Plan 997 and 998 supported
  • Supports Back-to-Back (point-to-point) applications
  • Annex A, Annex B, Annex C supported
  • US0 Supported
  • OLR Supported
  • Ethernet packets over VDSL2
  • Integrated 4-port Ethernet Switch
  • DIP switch settings for CO and Remote (Point-to-Point / Bridging / LRE Applications)

 

Benefits

Standard-compliant to ITU-T G.993.2
The DCE 5204V-BM complies with the international standards and interoperates with other major/open chipsets. It supports multiple profiles (8a, 8b, 8c, 8d, 12a, 12b, 17a, and 30a); different band plans (997, 998, and proprietary) and multiple annex types (Annex A, Annex B and Annex C), by default factory settings to fit various requirements. Using the latest chip design technology, the DCE 5204V-BM consumes less power (less than 2 watt per VDSL2 port) and has shorter training time to get the device up and running.

Long Reach Ethernet (LRE) / Back-to-back / Point-to-Point Applications
In addition to using one DCE 5204V-BM to connect to ISP/Telco’s DSLAM for accessing Internet or video services, users can utilize a pair of DCE 5204V-BM for back-to-back applications. Theoretically the maximum length for Ethernet cable is within 100 meters. By using two 5204V-BM modems, users can have 100/100Mbps connectivity over a twisted-pair phone line up to 200 meters or longer. This capability can help users to bridge two distinct LAN segments in longer distance or to have surveillance service a little farther over existing twisted-pair phone cables.

Easy Installation
The DCE 5204V-BM is easy to use and easy to setup. Simply connect the hardware interfaces without the need for complicated configuration efforts, the device will synchronizes with a VDSL2 DSLAM (VTU-O) in auto-negotiated mode and allow users to access the Internet or watch IPTV almost instantly.

 

Features & Specifications

VDSL2 Compliance
• Compliant with VDSL2 Standard, ITU-T G.993.2
• VDSL2 Profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a and 30a
• Supports 997 and 998 Band Plans
• Supports Annex A, Annex B and/ or Annex C
• Upstream/Downstream connection rates 100/100Mbps
• OLR (On Line Reconfiguration), US0 Supported
• Supports Ethernet 802.3ah

Network Protocols and Features
• Transparent bridging
• Ethernet over VDSL (EoVDSL) Bridging
• IEEE 802.3/3u compliant
• Hardware IGMP Snooping for IGMP v1/v2

Management
• Simple management function via console port
• Firmware upgradable (on demand)

Hardware Specifications
Physical Interface
• VDSL: one RJ-11 connector
• DIP Switch: DIP4 for configuring RT/COT mode
• Ethernet: 4-port 10/100Mbps auto-crossover (MDI / MDI-X) Switch
• Console: PS2, for management function
• Power jack
• Power switch
Physical Specifications
• Dimensions: 7.09" x 4.72" x 1.57" (180mm x 120mm x 40mm)
Power Requirements
• Input: 12V DC, 1A

Operating Environment
• Operating temperature: 0 - 40 °C
• Storage temperature: -20 - 70 °C
• Humidity: 20 - 95% non-condensing

 
Application Diagram

ADSL Deployment scenario for VDSL2 using FTTx using the DCE 5204V-BM VDSL2 Modem

Deployment scenario for VDSL2 using FTTx and DCE 5204V-BM VDSL2 Modem

ADSL Back-to-back or Point-to Point connectivity using two DCE 5204V-BM VDSL2 Bridge Modems

Back-to-back or Point-to-Point connectivity using two DCE 5204V-BM VDSL2 Bridge Modems

 

 

When purchasing from this page you will receive two (2) DCE 5204V-BM High Speed Extended Reach VDSL2 Bridge Modems.

Recommended Product Add-on
We strongly recommend the following product to protect your network and investment.
You can click on any of the links below to view the product information, and download the 552-D2 User Guide.
Clicking on the link below will open a new window

Customers who bought this product also purchased
Customers who bought this product also purchased
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search