Loading...

DATA CONNECT 2178CEE Long Reach Ethernet Extender -2PK

SKU: 665 Category:

$607.50

Description

DATA CONNECT 2178CEE-2PK COAX

The Data Connect 2178 Coax Ethernet

Extender is designed for an Industrial Coax Ethernet Extender application. The DCE 2178CEE has a switching architecture with 4 RJ-45 10/100Mbps Ethernet ports and one asymmetric or symmetric High Speed Ethernet port that can be RJ-11 or BNC Connector. Installation can use either BNC or RJ-11 for network deployment and achieve the absolutely fastest data transmission speed possible over existing coaxial cable and telephone wire without the need of rewiring.

The Data Connect 2178 Coax Ethernet Extender provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments like plant floors or in curb side traffic control cabinets. The DCE 2178CEE can operate in a wide temperature range of -40 to 75 Degree Celsius, so it can be placed in almost any location. The DCE 2178CEE is packaged in a compact, IP-30 metal case that allows either DIN or panel mounting for efficient use of cabinet space. The DCE 2178CEE has an integrated power supply with a wide range of voltages (12 ~ 48VDC) that allows for worldwide operability or for dual-redundancy with reversible polarity and an additional switching high voltage option of 100-240VAC and 85-400VDC.

The Data Connect 2178 Coax Ethernet Extender incorporates Ethernet over VDSL2 to transmit the Ethernet formatted data by using VDSL signaling over the existing coaxial cable or telephone wire. Therefore, the DCE 2178CEE is very good for deploying in networks that can use existing coaxial cable and telephone wire to transmit data to the Internet with minimum cost. The DCE 2178CEE can adjust to Master or Slave mode via a DIP switch. When the DCE 2178CEE master is connected via telephone cable with the other DCE 2178CEE slave device, the performance will be up to 99/63Mbps for asymmetric data rate within 200m and up to 28/2Mbps for asymmetric data rate at 1.4km. When the DCE 2178CEE master is connected via coax to DCE 2178CEE slave devices, the performance is up to 99/65Mbps for asymmetric data rate within 200m and up to 31/4Mbps for asymmetric data rate at 2.4km. This capability is ideal for use as an Ethernet extender for your existing Ethernet network.

 

 

 

 

Additional information

Weight 5.00 lbs
Dimensions 12.00 × 12.00 × 12.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

FEATURES

  • Cost-effective VDSL2 Master / Slave Ethernet extension
  • Selectable BNC and RJ-11 mode for the data transmission -40 to 75 Degree C operating temperature
  • Redundant Power Design: 12~48V DC redundant power with polarity reverse protect function
  • IP-30 metal case protection
  • One box design, Master / Slave selectable via DIP Switch
  • Defines Asymmetric (Band Plan 998) and Symmetric band plans for transmission of Upstream and Downstream signals
  • Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x Standards
  • DMT (Discrete Multi-Tone) line coding
  • Half Duplex Back Pressure and IEEE 802.3x Full Duplex Pause Frame Flow Control
  • Supports up to 1536 bytes packet size, 802.1Q VLAN tag transparent
  • Integrated address look-up engine, supports 2K absolute MAC addresses
  • VDSL2 Standalone transceiver for simple bridge modem application
  • Selectable Target Band Plan and Target SNR Margin
  • Supports extensive LED indicators for network diagnostics
  • DIN Rail and Wall Mount Design

SPECIFICATIONS

  • 10/100 BAQSE TX: 4 RJ-45, AUTO NEGOTIATION & AUTO-MDI/MDI-X
  • COAXIAL: 1 BNC FEMALE CONNECTOR
  • PHONE LINE: 1 RJ-11 FEMALE CONNECTOR
  • 4-POSITION DIP SWITCH
  • MASTER/SLAVE MODE SELECT
  • SELECTABLE BNC & RJ-11 MODE
  • SELECTABLE TARGET BAND PLAN
  • SELECTABLE TARGET SNR MODE
  • DMT (Discrete Multi-Tone) Line Coding
  • ITU-T G.997.1
  • ITU-T G.993.1
  • ITU-T G.993.2 (Profile 17a Support
  • LED INDICATORS
    • System: P1 (Green), P2 (Green), Fault (Green)
    • VDSL2: Master (Green), Slave (Green), ACT (Green), Sync. (Green)
    • 10/100Mbps Port: LINK/ACT (Green)
    • Ethernet: 10Base-T – 2-Pair, UTP Cat.3, 4, & 5 up to 100m (328ft)
    • Ethernet: 100Base-T – 2-Pair, UTP Cat.5, 5e, & 6 up to 100m (328ft)
    • Coaxial Cable: 50ohm, RG58A/U, RG58C/U, RG58/U, or Equivalent; 75ohm, RG-6 (Distance Up to 2.4Km
    • Twisted-Pair Telephone Wires (AWG24 or Greater) Distance Up to 1.4Km
  • DIMENSION (H x W x D): 5-5/16 x 3-15/16 x 1-5/16
  • WEIGHT: 1.1 pounds
  • 12-48VDC, 100-240VAC, 85-400VDC
  • 5.64Watts / 19BTU
  • OPERATING TEMPERATURE: -40 TO 75 Degrees Celsius
  • OPERATING HUMIDITY: 5 to 90%, Relative Humidity, Non-condensing
  • STORAGE TEMPERATURE: -40 to 85 Degrees Celsius
  • STORAGE HUMIDITY: 5 TO 90%, Relative Humidity, Non-condensing
  • REGULATION COMPLIANCE: FCC Part 15 Class A, CE
  • STABILITY TESTING: IEC6008-2-32 (Free Fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
  • IEEE 802.3 10BASE-T IEEE 802.3U 100BASE-TX IEEE 802.3X FULL DUPLEX FRAME FLOW CONTROL
  • ITU:G993.1 G993.2 (PROFILE 17A SUPPRT)

ORDERING INFORMATION
DCE/2178CEE Data Connect 2178 Coax Ethernet Extender
DCE/2178CEE-2PK Data Connect 2178 Coax Ethernet Extender 2-Pack