Description
The VX-VEB160R2 Ethernet extender supports the signal conversion between traditional Ethernet and innovative VDSL2 technology. The device is the right solution to integrate current Ethernet applications with the new building's phone line network technology.
The VX-VEB160R2 Ethernet extender supports symmetrical and asymmetrical data transmission bandwidth up to 50Mbps and distances of up to 1000ft. It is ideal for providing video-on-demand and multimedia services to apartments, hotels, and campuses without rewiring considerations. Moreover, the distance expansion also provides wide range coverage.
The VX-VEB160R2 Ethernet extender is plug-n-play without any software to configure and is also fully compliant with various network protocols. Moreover, the rich diagnostic LEDs on the front-panel provide the operating status of the system.
Application |
Ethernet Distance extension MTU / MDU / Hospitality Solution Last Mile of FTTx deployment |
Key Features
• Cost-effective VDSL2 CO / CPE Ethernet extending solution
• One box design, CO / CPE selectable via DIP Switch
• Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards
• DMT (Discrete Multi-Tone) line coding
• Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
• Built-in POTS / ISDN splitter
• Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for
?POTS connection
• Voice and data communication can be shared based on the existing telephone wire
?simultaneously
• Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent
• VDSL2 stand-alone transceiver for simple bridge modem application
• Advantage of minimum installation time (Simply as Plug-and-Play)
• Selectable target data rate and target SNR margin
• Supports extensive LED indicators for network diagnostics
• Compact in size, easy installation
VX-VEB160R2 Ethernet Extender Product Features:
Ports: | |
![]() |
10/100Base-TX: 1 RJ-45, Auto-negotiation and Auto-MDI / MDI-X |
![]() |
VDSL: 1 RJ-11, female Phone Jack |
![]() |
PHONE: 1 RJ-11, Built-in splitters for POTS / ISDN connection |
Functionality: |
|
![]() |
CO / CPE mode select |
![]() |
Selectable fast and interleaved mode |
![]() |
Selectable target data rate |
![]() |
Selectable target SNR mode |
Encoding: | |
![]() |
VDSL-DMT ?- ITU-T G.993.1 VDSL ?- ITU-T G.997.1 |
![]() |
ITU-T G.993.2 VDSL2 (Profile 12a Support), Annex A |
LED Indicators: | |
![]() |
One Power |
![]()
|
3 for RJ-11 / VDSL2 WAN : ?- Green, LINK / ACT ?- Green, CO mode ?- Green, CPE mode |
![]() |
2 for per RJ-45 10/100Base-TX port ?- Green, LINK / ACT ?- Green, Speed |
Cabling Type: | |
![]() |
10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft) |
![]() |
100Base-TX: 2-pair UTP Cat.5, up to 100m (328ft) |
![]() |
VDSL2: twisted-pair telephone or ISDN wire (AWG24 or better) extension up to 1.2km |
Dip Switch: | |
![]() |
4 position DIP switch |
Performance: | |
![]()
|
Full VDSL2 bandwidth up to: (Down Stream / Up Stream) |
By ordering from this page you will receive one (single unit) VX-VEB160R2 Ethernet Extender. Please keep in mind that this product is designed to work in pairs.
Reviews
There are no reviews yet.