Loading...

FiberPlex 10/100 Ethernet FOI-4110-W-ST

SKU: 4538 Category:

$1,001.60

Description

Overview

The FOI-4110-W-ST is a member of the FOI-4110 product series. The FOI-4110 fiber optic isolator uses 820nm optics as a low cost solution for 10BASE-T to 10BASE-FL and 100BASE-TX to 100BASE-SX Ethernet communications. The 820nm optics also provide backward compatibility with legacy devices that have a 10BASE-FL interface.

The units will have an automatic MDI/MDIX switch over capability that allow users to use either a straight or crossover cable for all LAN configurations. This eases the installation process for simple plug and play. A typical link consists of two FOI-4110, one at each end of the network, with a duplex fiber optic cable between them.

The units can be used in areas of high electrical noise or in and out of RF shielded enclosures. The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. FiberPlex recommends “R” units for high security applications because they have added filtering and shielding for RFI suppression.

Flexible Mounting and Powering Options

The FOI-4110-W-ST is part of the FOI line of products designed for ruggedized mil applications. It is housed in the familiar FOI shielded can enclosure. For standalone applications it can be powered by adding a PSQ-4909 AC supply or a PSQ-4920 DC power supply (not included). Optionally, up to 8 FOI units can be mounted on CMA chassis adapters and installed in an RMC-3101 or RMC-2101 rack mount chassis. The units are powered redundantly by a common back plane connection.

Additional information

Weight 5.00 lbs
Dimensions 5.00 × 5.00 × 5.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Features

  • 10/100 Ethernet to Fiber Converter
  • IEEE 802.3, TIA/EIA-785 Compliant
  • Optically compatible with Ethernet optical standards

Specifications

ELECTRICAL SPECIFICATIONS
 

Min

Typ

Max

Power Requirement Voltage Range (V)

7

9

12

Supply Current (mA)

400

 
Environmental Storage Temperature (°C)

-40

85

OperatingTemperature (°C)

0

50

 
Interface Connector RJ-45
PHYSICAL SPECIFICATIONS
 

Length

Width

Height

Weight
Case Dimensions Size 4

4.5 in (114 mm)

1.453 in (37 mm)

2.562 in (65 mm)

2 lb (0.9 kg)

OPTICAL CHARACTERISTICS

Fiber

Size

Max Distance

Wavelength

Output Power

RX Sens Loss Budget

Multimode

62.5 / 125 µm

2 km (10Base) 300m (100Base)

820 nm

-18 dBm

-30 dBm 12 dB
Singlemode 9 /125 µm 20 km 1300 nm -15 dBm -32 dBm 17 dB

Ordering Information

Isolator Media Converter for 10 100Base-T Ethernet 100Base-FX, multimode ST optics – SPECIAL ORDER

oi_FOI-4110.png