Power Input |
Terminal block, 12 48 VDC nominal Includes extended temperature external AC to DC power adapter. Two screws fasten the plug to the enclosure to lessen the chance of yanking it loose. |
Optional Power Input |
Also offer a nominal 48V input (36 60 VDC range) |
Mounting |
DIN-rail mounting clip on unit. Optional shelf mounting with the clip removed. |
Enclosure |
Metal enclosure to be installed in a cabinet on a DIN-rail or on a shelf. |
Operating Temperature |
-40 to +70C |
Humidity |
85% condensing. Conformal coating option available if 100% humidity is requested. |
Vibration |
IEC 60068-2-6, 7.5mm, 5?8 Hz, 2g, 11 ms |
Shock |
IEC 60068-2-27, 15 g, 11 ms |
Electrical Protection |
Power Input spike and surge protection per MIL STD 1275 |
Optional |
Conformal coating for protection against condensation and frost. This is a viable option for the nonsealed version. MIL STD 1275 protection |
Capacity |
Up to 8 simultaneous low- bandwidth voice or HD calls with SRTP or T.38 fax calls |
Voice Signaling |
SIPv2 / SIPv2 over TLS** (B2BUA capable, multi instance, simultaneous support of multiple registrars and direct IP dialing) SIP call transfer, redirect DTMF in-band & out-of-band All tones programmable (dial, ringing, busy) |
Voice Processing |
G.722 G.711m/A-law G.723.1 (6.4 kbps) G.729, 729a, 729ab (8 kbps) G.726 (16 ,24, 32, 40 Kbps) G.168-2004 echo cancellation (128 ms) Up to 8 simultaneous lowbandwidth voice or T.38 fax?calls Up to 8 HD calls with SRTP Up to 200 SIP-to-SIP calls*** Up to 4 SIP transcoded calls* Silence suppression and comfort noise Adaptive and configurable dejitter buffer Configurable RTP packet length |
Call Switching and Services |
Regular expression based call routing and number manipulation Number blocking Short-dialing Digit collection, distribution and hunt groups Transparent line extension Fallback Routing: Soft fall back to alternative route(s) |
FXS Connectivity |
2-wire Loopstart on RJ-11/12 EuroPOTS (ETSI EG201188) Programmable AC impedance, feeding, ring and onhook voltage Caller-ID FSK and ITU V.23/Bell 202 generation Long Reach FXS 10 km @ 3REN load Secondary Surge Protection* |
FXO Connectivity |
2-wire Loopstart RJ11/12 Programmable impedance Ring detection, tone detection Caller ID detection (FXS, DTMF) Disconnect supervision |
Connectivity |
One 10/100/1000Base-T Ethernet port USB port Auto-MDIX DHCP Client PPPoE Client (multi-session) IP Multi-Netting, VLAN, Secondary IP IPv4 and IPv6 – Dual Stack ICMP Dynamic and static NAT and NAPT ACL, Stateful Firewall DNS, DynDNS DHCP Server SNTP Client |
Quality of Service |
PacketSmart Network Assessment & Monitoring** Voice priority, DownStreamQoS Traffic Management, shaping policing IEEE 802.1p, IEEE 802.1Q, 4096 VLANs (Tag insertion/deletion), TOS, DiffServ Labeling |
Management |
Web/HTTPS, CLI & SSH Telnet access Patton Cloud Management Fully Documented CLI Telnet and HTTPs access TR-069, TFTP, HTTP, HTTPS configuration & firmware up- and download SNMPv3 agent Separate config domain (LAN side config and WAN side config) MIB II and private MIB Built-in diagnostic tools Secure Auto-Provisioning with built in root CA |
Power Consumption |
~7.2 watts |
Dimensions |
8-1/16 W x 6-3/16 D x 2-1/8 H in. (20.3 W x 15.8 D x 5.4 H cm) |
Weight |
1 lb 15 oz (890 g) |
Safety & Compliance |
EMC compliance: EN55022 and EN55024 Safety compliance: EN 60950 CE compliance FCC Part 15 Class A TBR21 (FXS) RoHS ITU-T K.21 protection (FXS ports)** |
|
* Specifications subject to change without notice. ** Internal power supplies available on special order basis. For more information, contact sales@patton.com |
Reviews
There are no reviews yet.