Patton 2027 Self-Contained, Serial to Parallel Converter

Overview
The Patton Model 2027 miniature serial to parallel converters represent a breakthrough in size and performance. Self-contained units, the Model 2027 support auto-directional data conversion, serial data rates to 38.4 kbps, and both hardware and X-ON/ X-OFF handshaking. Yet they do not require AC power or batteries for operation!

Incorporating microprocessor technology, the Model 2027 automatically orient themselves for serial-to-parallel or parallel-to-serial data conversion. They also sense which connected device is DTE and which is DCE, and orient themselves accordingly. Other parameters-data rate, flow control method (hardware or X-ON/X-OFF), parity and word length-are set by externally accessible DIP switches. A single LED indicator monitors five modes including transmission status. Standard connectors on the Model 2027 are shown in the ordering table below. Custom connectors are also available.

Features

• Auto-Directional Data Conversion
• Automatically Selects Parallel-to-Serial or Serial-to-Parallel Operation
• Automatically Selects DCE/DTE Mode
• Supports Both Hardware and X-On/X-Off Flow Control
• Data Rates from 300 to 38,400 bps
• External Configuration Switches
• DB-25 and 36-pin Connector Options
• Made in the USA — This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.

Specifications

• Data Rate: 300, 600,1200, 2400, 4800, 9600, 19,200, 38,400 bps selected by external DIP switch
• Data Format: Asynchronous serial/ 36-pin parallel
• Characters: 7 or 8 data bits, one stop bit
• Parity: Even, odd, or no parity w/ 7 or 8 data bits
• Connectors: Model 2027 – two DB-25 females
• Power: No AC power required; uses ultra low power derived from the RS-232 data and control signals
• Dimensions: 2.66" x 2.10" x 0.73" (6.8 x 5.3 x 1.9 cm)

ORDERING INFORMATION

2027F-M SER (F) <=> PAR (M) CONVERTOR  IS AVAILABLE UPON REQUEST