Description
Features
- Bi-Directionally Converts Synchronous RS-530 to V.35
- Supports Data Rates to 2 Mbps, Full or Half Duplex
- Transparent to Protocol
- No AC Power or Batteries Required
- Various DCE/DTE and Gender Combinations Available
- DB-25 and M/34 Connectors with Integral 6 foot (1.8m) Cable
- Circuitry Housed in a Miniature Case
- Made in the USA — This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.
Overview
The Patton Model 2014 RS-530 to V.35 converter lets a synchronous RS-530 device communicate bi-directionally with a synchronous V.35 device. The Model 2014 requires no AC power or batteries to operate and supports data rates to 2 Mbps. Operating full or half duplex, the Model 2014 passes all necessary clocking and control signals, and is transparent to protocol.
The Patton Model 2014 connects directly to the synchronous RS-530 interface using a male or female DB-25 connector. A male or female M/34 connector at the end of an integral 6 foot (1.8m) cable plugs into the V.35 device. Models with any combination of DTE and DCE wiring are available, thus eliminating the need for special crossover cables.
Specifications
- Interfaces: EIA RS-530/RS-422 to CCITT V.35
- Data Rates: Up to 2.048 Mbps
- Transmission Mode: Full or half duplex
- Protocol: Transparent to protocol
- Clocking: Set by connected devices
- Connectors: DB-25 male or female on RS-530 side, M/34 male or female on V.35 side
- Temperature Range: 32-122°F (0-50°C)
- Altitude: 0-15,000 feet
- Humidity: Up to 95% non-condensing
- Power Supply: None required, uses ultra low power from EIA data and control signals
- Dimensions: 2.66L x 2.10H x 0.73W (6.8 x 5.3 x 1.9 cm
- Weight: 14 oz. (400 grams) including cable
ORDERING INFORMATION
Model Name |
Description |
2014FT-MC |
RS422/530(F/DTE)TO V35(M/DCE) |
Reviews
There are no reviews yet.