Loop Telecom Ethernet and 4 E1 Router IP6510 LN / Loop-IP6510-LN-1FE-SFPH-P9-RT-G

SKU: 2574 Category:



The IP6510-LN Multiple WAN Edge Router has IPv4/IPv6 dual stack functionality and Level 3 Routing in a single unified device. It is suitable for large deployments that require only moderate bandwidth and a small port density but a very competitive CapEx. The LN stands for Linux, which backs up the Loop-OS architecture inside the IP6510-LN. The new Loop-OS includes many advanced features with more functionality to help you improve your network.

These features inside the Loop-OS include IPv4/IPv6 dual stack routing capability, software bridging*, serial-to-IP/UDP terminal services*, and network security features. With RIPng, OSPFv3 and BGP-4, the IP6510-LN is able to build a reliable IPv6 routed network.

All WAN ports and LAN ports can be configured into bridge mode*, router mode, or combinations of both. WAN interfaces including Ethernet, E1/T1 and Serial RS232/RS485 provide flexibility for any access network.

Using VPN connectivity over IPSec included in the Loop-OS software suite allows a highly secure and reliable connection over an IP-based network to any location.

Additional information

Weight 5.00 lbs
Dimensions 12.00 × 12.00 × 12.00 in


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Mechanical and Electrical

  • 2 Tributary Slots for WAN interfaces
  • Power Module
    • AC and DC coexist
    • AC power: 100 to 240 Vac, 0.8 A
    • DC power: -36 to -72 Vdc, 1.2 A
  • Commercial unit: 0°C to 50°C;Industrial unit: -20°C to 70°C

WAN Interface

  • Tributary Slots
    • 2 ports
    • Cold-swappable
    • Plug-in card types:
      • E1 card: 2 ports per card, Nx64k
      • T1 card: 2 ports per card, Nx64k
      • Ethernet card: 1 port per card,electrical RJ45
      • Ethernet card: 1 port per card,optical SFP
  • Built-in 2 Ethernet ports
  • Multiple WANs per fractional E1/T1 interface is supported, up to 64 WAN per system (maximum 16 WAN supports PPP encapsulation)

LAN Interface

  • 4 Ethernet ports

All Ethernet Interfaces

  • 10/100BaseT
  • Speed and duplex-mode auto-negotiation

Layer 3

  • IPv4/IPv6 dual stack
  • Routing Protocols: Static Route, RIPv1/v2, RIPng,
  • OSPFv2/v3, BGP4.
  • Multicast protocols: IGMPv1/v2/v3
  • VLAN Routing based on Static Route, RIPv1/v2,
  • RIPng, OSPFv2/v3.
  • Address Translation
    • NAT
    • Port Forwarding Table for NAPT (Virtual Service)
  • IP-VPN connectivity over IPSec


  • IPSec
    • Encryption: DES, 3-DES, AES-128/AES-256
    • Authentication: MD5, SHA-1
    • Key Management
      • IKEv1/v2 (pre-shared key or RSA certificate)
    • Up to 64 concurrent tunnels per interface
  • IP-VPN connectivity over IPSec
  • Access Control
    • Packet-Filtering based on policy type:
      • Inbound/Outbound direction
      • Source/Destination IP Address Range
      • Any Protocol Types (ICMP, TCP, UDP, etc.)
      • TCP/UDP Port Number Range
    • 1 control list per interface
    • Up to 100 rules per control list
  • 802.1x port-based authentication*
  • Multilevel login privilege control
  • Radius Client is supported, up to 3 Radius servers available for addressing.
  • SSHv1/v2
  • SNMPv3
  • Auto MDI/MDI-X cross-over

Layer 2 Encapsulation Protocols

  • PPP, MLPPP, Cisco HDLC, raw HDLC


  • Telnet and SSHv1/v2 (up to 4 concurrent sessions)
  • SNMPv3
  • Multilevel login privilege control
  • Syslog
  • NTP Client for IPv4, up to 4 NTP server


  • Policy based Egress Rate Limiting
  • Traffic Classification based on
    • Outbound direction
    • IPv4 or IPv6
    • Source/Destination IP Address Range
    • TCP/UDP Port Number
    • (DSCP+ENC) 1byte field / ToS 1 byte field
    • Any Protocol Type


  • DHCP Server/Relay for IPv4/IPv6
  • BOOTP compatible for IPv4

Software Bridging*

  • Frame size up to 1916 bytes*
  • IEEE 802.2x Flow Control*
  • STP(802.1d) *, RSTP(802.1w) *, MSTP(802.1s) *
  • Up to 16K MAC Table*
  • User-configurable MAC aging time*
  • Ethernet FCS padding/unpadding*
  • 802.1x port-based authentication*
  • VLAN*
    • Support up to 4094 VLANs*
    • VLAN ID mapping*
    • Support Q-in-Q *
    • Support VLAN Routing

RoHS compliant units are identified by the letter G appearing at the end of ordering code.

Part Number Description Notes

IP6510-LN Datasheet