Enable-IT 860WC PRO 2-Port Coax Gigabit Ethernet Extender Kit

SKU: 4747 Category:



The Enable-IT 860WC PRO IP68 rated Outdoor Coax Gigabit Ethernet Extender delivers real Gigabit Ethernet throughput up to NINE times further than the IEEE 802.3 specifications for Ethernet LAN limits of just 328 feet and is the highest-throughput encrypted and Secure Ethernet Extender on the planet bar none!


This is trusted Business Reliable Professional Grade Ethernet Extension without the high cost of fiber or unsecured wireless.
Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.

Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The 860WC PRO IP68 rated Outdoor Coax Gigabit Ethernet Extender can extend your Ethernet all the way up to 3,000ft / 915m, effectively saving you thousands in labor, administration, and security. What’s more, it achieves these distances at a throughput no other Ethernet extension solution can match and at a cost, quality and reliability our “Made in China” competitors cannot match.

Made in the USA with quality and pride – the only manufacturer to do so in our industry we started.

The American-made 860WC PRO IP68 rated Outdoor Coax Gigabit Ethernet Extenders are also very easy to install and ready to work in most any environment. The 860W PRO IP68 rated Outdoor Coax Gigabit Ethernet Extender uses industry LAN standard RJ-45 (8-pin) connectors.

Gigabit LAN switches built into each end coupled with industrial strength components to survive harsh temperature extremes delivers twice as much value and capabilities no other competitor can touch. IP68 Casing comes with 2 output ports.

Additional information

Weight 5.00 lbs
Dimensions 18.00 × 12.00 × 7.00 in


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

* Extended Coax Gigabit Ethernet throughput over new or existing coaxial wiring up 3,000ft / 915m encrypted and secure.

* Can be daisy chained to extend infinitely in linear or tree topology.

* Rapid LAN style installation RJ45 jacks – no programming required.

* Supports up to 9 Enable-IT 860WC PRO Coax Gigabit CPE units on the same 1-pair wire for the entire length of the run – ideal for multidrop off of a single Enable-IT 860X PRO Extender kit.

* Ruggedized Professional Business Grade mountable casing for harsh environments.

* LAN Device independence – Transparent to 802.3 Protocols, Applications and MAC / IP addresses.

* Longest warranty protection included exceeding any knockoff competitors.

* Dual Gigabit LAN RJ-45 ports on remote outdoor end.
1-port model available as the 860XC PRO.

This kit includes the following:

(1) EnableIT 860XC PRO Coax Gigabit Ethernet Extender CO unit
(1) EnableIT 860W PRO Outdoor Coax Gigabit Ethernet Extender CPE unit
(2) 10′ Black RJ-45 Ethernet Patch Cords
(1) 56V-2.5A 60W DC Country Specific (120-260V AC) Power Adapter.
(1) Enable-IT 860WC PRO Quickstart Guide


56V-2.5A 60W DC Country Specific (120-260V AC) Power Injector.
Country Specific (120-260V AC) Power Adapter.

Data Rate

1,000Mbps full-duplex Ethernet Data
1,000Mbps Interconnect throughput – Maximum*
Ethernet LAN Protocol Independent
Ethernet LAN MTU 1500
IP VLAN passthough


Ethernet: (2) LAN RJ-45 Standard 10/100/1000 Base-TX autosensing ports
Interlink: (1) 75 Ohm Coax Gigabit BNC

860X PRO CO Dimensions

Height 1″ (26mm) Depth 3.25″ (82.5mm) Width 4.37″ (111mm)

860WC PRO CPE Dimensions

Height 2.5″ (89mm) Depth 3.4″ (86mm) Width 4.37″ (216mm)


Operational Temperature: -49°F to 168°F (-45°to 76°C)
Humidity: 5% to 95%, non-condensing


Ruggedized wallmount black Aluminum casing and IP68 Rated wall mount thick plastic casing. Optimized for heat extraction and isolation without fans.

*Actual data rates can vary as there are uncontrolled characteristics for every install:
1) Gigabit Ethernet Chip manufacture specs in the end device LAN equipment. Can be different on each end.
Check your OS Ethernet LAN packet size settings, i,e Jumbo Frame, etc.
2) Amount of dedicated LAN chip buffer memory in the end device LAN equipment.
3) Traffic types and protocols. i.e. VoIP prioritized over other packets, VLAN’s, etc.
4) Interlink wire gauge.
5) Interlink wire type for number of twists per spec on Category rated. i.e. CAT3 can only handle 80Mbps
6) Interlink wire pair used – same twisted pair bundle or mixed pairs.
7) Length of Interlink wiring. The 860WC PRO Outdoor Coax Gigabit Ethernet Extender dynamically adjusts to changing conditions to select fastest and stable channels on the wire pair.
8) Electro magnetic interference from surrounding environment. Hospital X-Ray rooms bleeding out EMF, other high frequency signaling bleeding into Interlink wire pair, Microwave WiFi communications blasting EMF radiation onto the Interlink wire pair run, etc.



Model # Description Availability
860WC PRO  Enable-IT 860WC PRO 2-Port Coax Gigabit Ethernet Extender Kit    General Availability