Enable-IT 823 2-Port 2-pair 250m Gigabit PoE Extender

SKU: 4750 Category:



The Enable-IT™ 823 Gigabit PoE Extender is based on our 18 year world’s 1st copper Gigabit PoE Extender Kit solution in the industry today.


This 823 solution is a standalone unit to be used with your PoE Injector or PoE Midspan. The standalone 823 can drive incremental Gigabit Ethernet to 823ft (250m) with a single unit. Ideal ror installing PoE IP cameras, PoE Access Points and remote LAN segments – Nothing is more cost effective or simple to install. The three LAN port design allows for a laptop to be connected safely with no PoE and quickly configure your PoE Devices.

The Enable-IT 823 can drive industry standard Gigabit Ethernet signals to over two and a half times the restricted IEEE 802.3 Ethernet distance all by itself and delivers upon to 30W 56V of PoE power per port at 250m. This cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today.

This is ideal for installing high powered PoE cameras remotely using only a CAT5e or CAT6 rated cabling.

You can also daisy chain (4) 823 PoE Extender units to reach 3,292ft (1,000m) to power dual 56V 30W PoE devices easily.

* Extends standard Gigabit Ethernet Full Duplex 2.5 times beyond the IEEE barrier of 328ft (100m) with PoE 56V over CAT5e/6 or better wiring.
* Three LAN port design allows for deployment of (2) separate PoE IP Cameras or devices up to 823ft (250m).
* Rapid LAN style installation RJ-45 LAN Interfaces – no programming required.
* Cisco / Motorola reverse polarity PoE compatible.
* Daisy chain up to (4) 823’s to 3,292ft (1,000m).
* Ideal for deploying High Definition IP Cameras requiring Gigabit throughput at distance.
Supports VoIP (Voice over IP).
* LAN Device independence – Transparent to 802.3 Protocols, Applications.
and MAC / IP addresses.
* Sustained full-duplex service delivery end to end.
* You must supply the PoE to power the 823 standalone unit or you can order the 823P Gigabit PoE Extender.

This kit includes the following:

(1) EnableIT 823 Gigabit & PoE Ethernet Extender Unit
(1) Enable-IT 823 Quickstart Guide
(1) 10′ Black Ethernet patch cords



Model # Description Availability
823 Enable-IT 823 2-Port 2-pair 250m Gigabit PoE Extender     General Availability 

Additional information

Weight 3.00 kg
Dimensions 12.00 × 10.00 × 5.00 cm


Self Powered from your 48V ~ 60V DC PoE Input
Built in Power Detection triggers full power from your PoE input to pass down the line
straight through to end devices

Data Rate

1000Mbps full-duplex Ethernet Data & PoE (802.3af) or PoE (802.3at)


Ethernet: (3) LAN RJ-45 Standard 10/100/1000BaseTX, MDI-X, Auto-negotiate ports)


Thick 1.14” (29mm) x Width 1.96” (50mm) x Length 4.06” (103mm)


Operational Temperature: -40°F to 167°F (-40°to 75°C)

Humidity: 5% to 90%, non-condensing


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.