Description
DrayTek VigorSwitch P1100
The VigorSwitch P1100 is ideal for SOHO and small business with the high-performance capability and IPv6 management. To cater for high bandwidth traffic, it is equipped with 8 Gigabit Ethernet ports for the LAN side, and 2 SFP ports for the backbone side. VigorSwitch P1100 is equipped with extensive facilities for maximizing your LAN performance, VLAN capability to allow flexible network design, and QoS capability for flexible bandwidth control. Furthermore, the power saving by IEEE802.3az EEE can offer you a green Ethernet networking environment.
The VigorSwitch P1100 also offers power to all these ports with Power of Ethernet (PoE) capability. All PoE-enabled devices for the business usages, such as IP phones, wireless AP or IP Cameras can all rely on VigorSwitch P1100 switch for the power supply, you are free to position equipment wherever they should be, not being limited by the power outlet.
Model |
VigorSwitch P1100 |
GbE. LAN |
X |
PoE |
X – Max. 120W |
SFP |
X |
FEATURES
IP Version
- IPv4
- IPv6
Standard Compliance
- IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-T
- IEEE 802.3ab 1000Base-TX
- IEEE 802.3x Flow Control Capability
- ANSI/IEEE 802.3 Auto-negotiation
- IEEE 802.1q VLAN
- IEEE 802.1p Class of Service
- IEEE 802.1d Spanning Tree
- IEEE 802.1w Rapid Spanning Tree
- IEEE 802.3ad Port Trunk with LACP
- IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
- IEEE 802.1az Energy Efficient Ethernet
VLAN
- IEEE802.1Q Tag-based VLAN
- Support Port-based VLAN
- Support Static VLAN
- Port Isolation
- Management VLAN
- Voice VLAN (OUI Mode)
QoS
- Support 8 Queues
- Rate limit
- Port-based (Ingress/Egress)
- Queue Setting
- WRR
- Strict Priority
- Class of Service
- Port-based
- CoS
- DSCP
- CoS-DSCP
- IP Precedence
Link Aggregation
- Supports 8 Link Aggregation Groups with Static & LACP types
- Up to 8 Ports for Each Group
- Support Traffic Load Balancing
Management
- Support SNMP v1/v2c
- Firmware Upgrade/Backup via HTTP/TFTP
- Support HTTP/HTTPs Web User Interface
- Configuration Upgrade/Backup via HTTP/TFTP
- Factory Default
- System Reboot
- Support Command Line Interface (CLI) via Telnet
POE
- Dynamic (None Priority class Base)
- Static (Priority Base)
Security
- Supports Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
- DoS attack prevention
Account Management
- Multiple user Account
- Two-Level Security (Admin/User)
Network
- Up to 8K MAC Address Table
- Dynamic Address
- Static Address
- Support Jumbo Frame 10KBytes
- Support STP and RSTP
- Support SNTP
Specification
Hardware Interface |
|
---|---|
Operation Voltage | 100~240 VAC |
Power Consumption | 12.16Watt |
PoE Power Budget | 120 Watt (up to 30Watt per port) |
Temperature | Operating : 0 ~ 40? Storage: -20 ~ 70? |
Humidity | 5% ~ 90% ( non-condensing ) |
Dimensions | 266(L) x 185(W) x 44(H) mm |
Weight | 1.4 kg |
Ordering Information
Model Name | Description |
VigorP1100 | POE Switch |
Reviews
There are no reviews yet.