DATA CONNECT PE202T BELL 202T 0-1200BPS PCB 2/4 WIRE LEASED LINE & MULTIPOLLING

DATA CONNECT PE202T BELL 202T 0-1200BPS PCB 2/4-WIRE LEASED LINE & MILTIPOLLING

OEM Modem Series
To service the growing need for efficient, reliable data communication in harsh in environments of utility substations and industrial facilities, DCE has developed a series of OEM PCB modems that con operate at 5V logic (TTL) or simple send and receive signals and survive high surge levels and extreme heat and cold. All this without compromising the performance expected from the state-of-the-art communication devices. The rapid move toward “intelligent” substations, where meters, relays, RTU’s, and SCADA units are able to “talk” to a remote operator, communication devices such as modems are moving off the desktop and into the meters, RTUs, and SCADA units where the conveniences of a standalone modem are unacceptable. Data Connect Enterprise has addressed this problem by developing the PE2.4, PE9.6FPD, PE1.4, PE14.4L, PE202T, and PE28.8 OEM modems designed specifically for harsh environments.

The PE OEM modems are highly sophisticated full duplex, V.22bis data modems that are designed to interface with RS232, RS485 (external device), 5V logic (TTL) or simple send and receive signals. The PE2.4, PE14.4, and PE28.8 OEM modems operate at full or half duplex on a dial line. The PE202T, PE14.4L, and PE9.6FPD OEM modems operate full or half duplex on a 2 or 4 wire leased lines.

The PE OEM SPEC’s can be found in the MIU modems, MD cards, and the MIU Power Port modems.