Data Connect ANS205CR 5 port Industrial Ethernet Switch

The ANS-205 has 5 Ethernet Switching ports that support 10/100Base-T, with a 10/100M auto-negotiation feature and auto MDI/MDIX function.

It can connect 5 workstations and automatically switches the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The flow control mechanism is also negotiated.

LEDs embedded in RJ-45 jacks make for easy monitoring. Port connectors are shielded RJ-45. A power source for +10 to +30VDC is required.

Features

• Automatic MDI / MDI-X crossover for plug-and-play
• Each port supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• 1.4Gbps high performance memory bandwidth.
• Integrated look-up engine with dedicated 1 K unicast MAC addresses.
• Supports +10 ~ +30V DC voltage
• Supports operating temperatures from –30 ~ +75 ?
• DIN rail mount for industrial usage
• 1.4Gbps high performance memory bandwidth. 

Specifications

• Compatibility:IEEE 802.3, IEEE802.3u, IEEE802.3x
• Interface: 10/100 Base-T
• Port: 10/100 Mbps x 5 (Shielded RJ-45 Jack)
• Provides LEDs for network and power monitoring
• ESD Protection:
  • 8KV Contact Discharge
  • 15KV Air-Gap Discharge
• Cables:
  • 10 Base-T (Cat.3, 4,5 UTP cable; 100m Max.)
  • 100 Base-T (Cat.5 UTP cable; 100m Max.)
• Environment:
  • Operating temperature: –30 ~ +75 ?
  • Storage Temperature: –40 ~ +85 ?
  • Relative Humidity: 10% to 90% non-condensing
• Dimensions: 32.30 x 99.00 x 77.50 mm (W x H x D)
• Power requirements: +10 to +30V DC (Removable Terminal Block)
• Low power consumption: 0.052A@24VDC, +/- 5% arrowed. (Worst-case test: All five ports link at 10BT)

Ordering Information

• DCE/ANS205-CR Unmanaged 5-Port Industrial Ethernet (RoHS)