DATA CONNECT 2400E-000-2 modem – 2 Wire Dial V22bis, V22, V21, BELL 212A, BELL 103J

SKU: 693 Category:



For Data center and remote network applications that require low-speed connections, the Data Connect ST2400E-000-2 modem incorporates the latest advances in modem design to deliver efficient and reliable performance. The Data Connect ST2400E-000-2 modem has been developed to meet the most stringent environmental and performance demands of the commercial and industrial application. Every relay, transformer, capacitor, switch and connector is selected for its ability to withstand environmental demands. The Data Connect ST2400E-000-2 modem is available in commercial and industrial single port standalone configurations. Rackmount configurations are also available.

2400E SMART MODEM – This device provides a complete implementation of the standard 2400bps smart modem. It provides compatibility with the V22bis, V.22, Bell 212A, and Bell 130J standards for modem operation and offers a complete AT command set for configuration and dialing. In addition, this device offers a "dumb" mode of operation for connection to equipment such as telephone switches or control systems that may be constantly streaming data. The 2400E is available in our standard stand alone package and may be connected to either an AC or DC supply.


  • Standard 2-Wire Dial-up
  • AT Command Set
  • Standard Error Correction and Compression
  • RS232 Terminal Interfaces
  • Asynchronous DTE Support


V.22bis, V.22, Bell 212A

DTE Interface: 
RS232C (V.24), Synchronous or Asynchronous – Autobaud or selectable formats and rates to 4.8Kbps

Auto Dial Modes:
Standard AT compatible dial commands or DTR dial or stored number

Answer Modes:
Standard auto answer or manual answer under DTE control

Error Correction:
V.42 and MNP 2-4 error correction

Data Compression:
V.42bis and MNP5 data compression

Configurable Control:
Standard AT commands for both local and remote configurations

V.54 through AT commands

Network Interface:
Dial-up – 2-wire Pulse or DTMF
– XMT level – 12dBm
– RCV sensitivity – 43dBm

Standalone single-port
Standard units automatically adjust to 9VAC or 9-14VDC

Rackmount –
Standard CC-2016 rack automatically adjusts to 85-265VAC, 27-440Hz. Optional DC Supply automatically adjusts to positive or negative 36-75VDC

Commercial Unit
Operating temperature range 20°C to +70°C
Humidity – 90% non-condensing
Industrial Unit
Operating temperature range -40°C to +85°C
Humidity – 95% non-condensing

FCC Part 68 & Part 15, Class A
Optional International approvals are available

Commercial Unit
Dimensions 5.30”L x 5.05”W x 1.53”H
Weight – 12oz Rackmount Unit
Fits CC-2016 rack 4.73”L x 4.60”W x 80”H

Additional information

Weight 5.00 lbs
Dimensions 12.00 × 12.00 × 12.00 in


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.