WAN Interface
Line Rate: ITU G.991.2 (2004)
Coding: Trellis Coded Pulse Amplitude Modulation (TC-PAM16 and TC-PAM32)
Support: Annex A, B, F, and G
Payload rates: 192Kps to 5.696Mbps (N=3 to 89) for 2-wire model.
384Kbps to11.392Mbps (N=6 to 172) for 4-wire model
Connection: RJ-45 jack (2-wire or 4-wire)
Impedance: 135 ohms
E1/T1 Interface
Connection: RJ-45 for balanced 120Ω E1, 100Ω T1 cable and BNC for unbalanced 75Ω E1 cable
Line Rate: E1 – 2048KHz +/- 50ppm, T1 – 1.544Mbps
Framing: PCM30/PCM30C/PCM31/PCM31C and Unframed E1/T1
Data Rate: 64Kbps to 2.048Mbps (Nx64 Kbps, N=1 to 32)
Operation: Full E1/T1 and Fractional E1
Payload: Rates Up to 5.696 Mbps (for 2-wire model) or Up to11.4 Mbps (for 4-wire model)
Support: V.35 or RS-530/V.36/X.21
LAN Interface
10/100Mbps RJ45 Interface
Half/Full Duplex, Auto-sensing, Auto-Crossover
Up to 1024 MAC address learning
Standard HDLC WAN encapsulation
Indications
Power, Alarm, Test, SYNC, Error, LBK, E1, Data, Eth
DSL Timing
Internal
From E1/T1 Recovery (as E1/T1) • From DTE (as V.35)
Performance Monitoring
ES, SES, UAS, LOWS, Alarms and Errors
Loopback Tests (E1/T1 and V.35 interface only)
Local Digital Loopback • Local Loopback
Remote Line Loopback • Remote Payload Loopback
Far-end Line Loopback • Far-end Payload Loopback
V.54 Loopback (for V.35 interface) • Build-in 2047 pattern BER tester
Management
Configuration with keypads and LCD display
Console port (RJ-45, RS-232)
Supports firmware upgrade
Power Input
AC Input: 100~240VAC, DC Input: -36 ~ 72VDC
Power Consumption
< 10W
Dimensions
168 x 195 x 48 mm (D x W x H)
Weight
0.85kg
Temperature
0 to 50°C (Operating), -10 to 70°C (Storage)
Humidity
10 to 90% non-condensing
Certification
CE, FCC, RoHS
MTBF
70,000 hrs.
Reviews
There are no reviews yet.