Loading...

Enable-IT 360 61W – 56VDC Gigabit PoE+ Injector – No power detect

SKU: 1556 Category:

$68.00

Description

The Enable-IT 360 60W 56V Gigabit PoE Injector (Power over Ethernet) is single port IEEE 802.3 AF/AT/BT(type 3) compliant Midspan solution that is a compact and easy to install with RJ-45 Ethernet cabling. This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera or other PoE powered equipment. It eliminates the need for external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.

The Enable-IT 360 Gigabit PoE Injector is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3 AF/AT/BT compliant device, the Injector uses all 4 pair in a category rated wiring bundle. i.e. CAT5e or better run required for Gigabit Ethernet.

The Enable-IT 360 is a 60W 56V DC Gigabit PoE Injector supports both 2-pair and 4-pair PoE output and is ideal for installing high powered IP PoE devices up to 3,500ft when used in conjunction with an Enable-IT PoE Extender.
As will all PoE voltage drops over distance. As a rule of thumb you can lose up to 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring for best distance results.

 

  •  Designed and Made in the USA in High Quality production runs – Factory floor direct
  •  Professional Business Grade Product, Solid reliability not Chinese Home Use
  •  Includes a Industry leading 4 year Manufacturer Warranty
  •  Maintains existing RJ-45 Ethernet Data (10/100/1000mbps).
  •  US West Coast Factory Floor Direct
  •  DOE Level VI Efficiency – 56VDC @ 1.2A = 60 watts nominal at 86%
  •  Built in Auto-Recovery, Over-Voltage and Short Circuit protection for your valuable PoE electronics. Output can be shorted permanently without damage.

Additional information

Weight 5.00 lbs
Dimensions 12.00 × 10.00 × 5.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

  • 60W – 56VDC IEEE 802.3 AT/AF/BT Power Over Ethernet Midspan Injector.
  • FCC Part 15 Class B & EN55022 Class B.
  • DOE Level VI Efficiency – 56VDC @ 1.2A = 60 watts nominal at 86%
  • Rapid LAN style installation RJ45 jacks – no programming required.
  • Maintains existing RJ-45 Ethernet Data (10/100/1000mbps).
  • Supports VoD (Video on Demand) and MPEG IP channels.
  • Network Equipment independence – Transparent to protocols, applications and MAC addresses.
  • Cisco, Tango, Motorola and other Reverse Polarity compatible..
  • FCC Class B Part 15 and EN55022 (CISPR 22) Class B.
  • Immunity ESD: EN61000-4-2 level.
  • Immunity RS : EN61000-4-3 level.
  • Immunity CS : EN61000-4-6 level.
This kit includes the following:

(1) EnableIT™ 360 60W – 56V Gigabit PoE Injector

(1) (90 – 264V AC) Country Specific power cord provided

(1) EnableIT™ 360 60W – 56V Gigabit PoE Injector Quickstart Guide

(1) 4yr Manufacturer Warranty

Power

AC Input (90 – 264VAC) @50/60Hz
DC output 60W – 56V DC 1.5A IEEE 802.3 AT/AF/BT Power Over Ethernet Midspan Injector.
Country Specific IEC 60320C6 Grounded power cord provided.
Built in Auto-Recovery, Over-Voltage and Short Circuit Difference and Common Mode Protection.
Clamping Protection – 11V LAN, 60V Power, Max Surge discharge – 1500A (8/20us) Power
Peak Pulse Current – 36A (10/1000us) LAN, Shunt capacitance – <5 pF LAN

Data Rate

1000Mbps full-duplex Ethernet Data

Interface

(1) LAN RJ-45 10/100/1000 Base-TX autosensing socket for LAN Input
(1) LAN RJ-45 10/100/1000 Base-TX autosensing  socket for PoE output
Pins 1,2,4 & 5 + power, Pins 3,6,7 & 8 – power

Dimensions

Height 1.30″ (33mm) Depth 3.98″ (101mm) Width 2.36″ (60mm)

Environment

Operational Temperature: -40°F to 176°F (-40°to 80°C)
Humidity: 5% to 95%, non-condensing

Enclosure

Ruggedized lightweight casing with Power LED indicator.

ORDERING INFORMATION

 

Model # Description Availability
360 Enable-IT 360 61W – 56VDC Gigabit PoE+ Injector – No power detect    General Availability