CALL US :1 (888)-4WAN-LAN

Patton Model 2084 Interface Powered, RS-232 to RS-485 Interface Converter (with Handshaking)[2084]

Patton Model 2084 Interface Powered, RS-232 to RS-485 Interface Converter (with Handshaking)

Patton Model 2084 Interface Powered, RS-232 to RS-485 Interface Converter (with Handshaking)[2084]

$99.00
Quantity :

Features

  • Conforms to the EIA RS-485 Standard
  • Operates Asynchronously, Point-to-Point or Multipoint, over 2 or 4 Wires
  • Data Rates to 115,200 bps
  • Selectable RTS-CTS Delay
  • Selectable High-Low Impedance
  • Able to Operate with or without "Echo"
  • Carrier may be Continuous or "Controlled by RTS"
  • 50 drops in a multi-point environment
  • No AC Power or Batteries Required
  • Built-In Surge Protection - Standard
  • Model 2086 features optical isolation
  • Made in the USA — This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.

Overview

The Model 2084 high speed RS-232 to RS-485 interface converter supports async RS-232 data rates to 115.2 kbps over 2-wires. Passing one control signal in each direction, the Model 2084 can handle up to 50 terminal drops in a multipoint polling environment. The Model 2084 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. In addition, Silicon Avalanche Diodes provide 600 watts per wire of protection against harmful data line transient surges

Specifications

  • Transmission Format: Asynchronous
  • Data Rate: Up to 115,200 bps
  • Range: Up to 9 miles (14.5km)
  • RS-232 Interface: DB-25, male or female (DCE/DTE switchable)
  • RS-485 Interface Options: DB-25, male or female; RJ-11 or RJ-45 jack; terminal block with strain relief
  • Control Signals: DSR turns "ON" immediately after the terminal raises DTR; DCD turns "ON" after recognizing the receive signal from the line; CTS turns "ON" after the terminal raises RTS.
  • RTS/CTS Delay: 0 msec or 8 msec
  • Carrier: The carrier is switch selected either continuous operation or controlled by RTS
  • Power: Draws operating power from RS-232 data and control signals; no AC power or batteries required.
  • Temperature: 32° to 122° F (0° to 50° C)
  • Size: 2.66" x 2.10" x 0.73" (6.8 x 5.3 x 1.9 cm)

Ordering Information


SPECIAL ORDER PRODUCTS

  • 2084F  RS-232 TO RS-485 INTERFACE CONVERTER (DB25F; TERMINAL BLOCK); 2-WIRE
  • 2084FRJ11  RS-232 TO RS-485 INTERFACE CONVERTER (DB25F; RJ11); 2-WIRE
  • 2084FRJ45  RS-232 TO RS-485 INTERFACE CONVERTER (DB25F; RJ45); 2-WIRE
  • 2084M  RS-232 TO RS-485 INTERFACE CONVERTER (DB25M; TERMINAL BLOCK); 2-WIRE
  • 2084MRJ11  RS-232 TO RS-485 INTERFACE CONVERTER (DB25M; RJ11); 2-WIRE
  • 2084MRJ45  RS-232 TO RS-485 INTERFACE CONVERTER (DB25M; RJ45); 2-WIRE?