CALL US :1 (888)-4WAN-LAN

Patton CopperLink CL1212 Ultra-High-Speed Copper Ethernet Extender | 168 Mbps Downstream[CL1212]

Patton CopperLink CL1212 Ultra-High-Speed Copper Ethernet Extender | 168 Mbps Downstream[CL1212]

Select Model or Contact Us for more information.

Model:

CL1212-E -----  +$203.00
CL1212-EUI -----  +$208.00
CL1212-EUI-2PK -----  +$415.00
CL1212-TB-EUI -----  +$208.00
CL1212-TB-EUI-2PK -----  +$415.00
Quantity :

Overview


Combining data flows from up to 2 network-enabled devices onto a single twisted pair or coax cable, the CopperLink Model CL1212 can deliver IP traffic up to 1.8 miles (3 km) away—well beyond the standard 328-foot (100-meter) Ethernet distance limitation.

 

With achievable line rates up to 168 Mbps, the CL1212 eliminates the bandwidth constraints commonly experienced with other copper-based transmission technologies. The Model 1212 is engineered to re-use existing infrastructure previously employed in such legacy applications as alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV. Many newer cabling standards are also supported, including Cat 5e, Cat 6 and Cat 7.

 


A built-in two-port Ethernet switch makes the CopperLink CL1212 ideal for delivering multiple IP information streams over a single cable. At a guardhouse or security kiosk for example, you could aggregate IP data from a laptop and a high-resolution IP video camera for simultaneous transmission over a single Ethernet connection.



A single-port version, the CopperLink Model CL1211 (available by special order) is ideal forapplications requiring the enhanced security of asingle Ethernet port.

 

Applications


Typical Application: Extending Ethernet over Cat 5+ or UTP

CopperLink™ 1212 application diagram

 

Features

  • Ethernet Extension—Extend 10/100Base-TX Ethernet well beyond its 328-foot (100-meter) limitation over a single unshielded twisted pair (UTP) or Cat 5e/6/7 cable.
  • Operates Over Twisted Pair—Realize fiber-optic speeds without the expense—and hassle—of installing new cables or line-of-site wireless circuits.
  • Plug and Play—Set these units up straight out of the box. No configuration is required. Dual auto-sensing 10/100 Ethernet ports support full or half duplex operation.
  • Multiple Line Rates Supported—Switch-selectable rate mode options optimize rate and reach for the noise environment, wire gauge/type and length.
  • Transparent LAN Bridging—Bypass network configuration requirements by transparently passing all higher layer protocols—including 802.1Q VLAN frames (tagged and untagged).
  • Made in the USA— This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.

SPECIFICATIONS

CopperLink Line Interface
  • RJ-45 (pin 4 = ring; pin 5 = tip)
  • Terminal block, 2 position
CopperLink Line Modulation DMT (Discrete Multi-Tone)
Ethernet Interface (x2) 8-position, shielded RJ-45. Auto-sensing 10/100Base-TX with half or full duplex operation.
Model 1211 has one 10/100Base-TX port.
Protocol Transparent to high layer protocols: supports 802.1Q VLAN tagged or untagged frames.
Transparent to IP Video schemes: fully transparent to such compression schemes as MPEG-4, H.264, and MJPEG.
Target SNR Modes 6 dB and 9 dB
Management 8-position DIP switch
Monitoring 8 LEDs display Power, Link, Ethernet 1–4, Remote, and Local status.
Power Supply External AC: 100–240 VAC
Compliance FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC
Environment
  • Temperature: 0 to 50°C
  • Humidity: 5 to 95%, non-condensing
  • Extended Temperature: -40 to 85°C ( CL1212E or CL1211E)
  • Extended Humidity: 5 to 85%, condensing (CL1212E/CC or CL1211E/CC)
Dimensions 4.13 W x 1.5 H x 3.15 D in. (105 W x 38.1 H x 95.3 D mm)
Weight 0.4 lbs (181 g)
MTBF 77,000 hours

ORDERING INFORMATION

# Model # Description Availability
1 CL1211/EUI High Speed CopperLink Ethernet Extender; 1 x 10/100BaseTX; RJ45 Line, 100-240VAC General Availability
 
2 CL1211/EUI-2PK High Speed CopperLink Ethernet Extender Kit (Local and Remote); 1 x 10/100BaseTX; RJ45 Line, 100-240VAC General Availability
 
3 CL1211/TB/EUI High Speed CopperLink Ethernet Extender; 1 x 10/100BaseTX; Terminal Block Line, 100-240VAC General Availability
 
4 CL1212/E High Speed CopperLink Ethernet Extender; 2 x 10/100BaseTX; RJ45 Line; No Power Supply General Availability
 
5 CL1212/EUI High Speed CopperLink Ethernet Extender; 2 x 10/100BaseTX; RJ45 Line, 100-240VAC General Availability
 
6 CL1212/EUI-2PK High Speed CopperLink Ethernet Extender Kit (Local and Remote); 2 x 10/100BaseTX; RJ45 Line, 100-240VAC General Availability
 
7 CL1212/TB/EUI High Speed CopperLink Ethernet Extender; 2 x 10/100BaseTX; Terminal Block Line, 100-240VAC General Availability
 
8 CL1212/TB/EUI-2PK High Speed CopperLink Ethernet Extender Kit (Local and Remote); 2 x 10/100BaseTX; Terminal Block Line, 100-240VAC General Availability