CALL US :1 (888)-4WAN-LAN

Patton 2162/EUI-2PK[2162/EUI-2PK]

Patton 2162/EUI-2PK[2162/EUI-2PK]

$1,145.00
Quantity :

 Overview

The Patton CopperLink Model 2160 Series simplifies and provides cost effective network extension by utilizing pre-existing twisted pair infrastructure. LAN extension doesn’t have to be expensive or difficult. Patton’s Model 2160 series of auto-rate Ethernet Extenders open the door to low-cost and easy set-up LAN extension. The LAN Extenders are easy to use and take advantage of existing copper twisted-pair infrastructure to connect LANs at high speed and over long distances.

There are three models available in the 2160 series, including the flagship Model 2162 that utilizes 1 to 4 pair of voice grade wires enabling maximum transmission speeds of 22.8 Mbps at a distance of 1.6 miles (2.6km). Also available is the Model 2161 (4 wire)—11.4 at 1.6 miles (2.6 km), and the Model 2160—5.7 Mbps at 1.6 miles (2.6 km). Maximum distance achieved with all CopperLink 2160 models is 4.1 miles (6.6 km).

Whether connecting corporate LANs or remote offices, Patton Ethernet Extenders offer the best combination of speed and distance in the industry. Other LAN extenders operate at a single rate or are difficult to configure for LANs located at different distances, but the CopperLink Ethernet Extenders’ auto-rate adaptation feature ensures that users get the highest speed possible for the distances they are trying to reach. Patton Ethernet Extenders include MTU support of 1,792 bytes, and come with a built-in MDI-X switch, that simplifies connection to LANs or PCs since it works correctly with a straight-through cable or a cross-over cable. Set-up is easy, just connect the Ethernet port cable and the copper twisted-pair to the Extenders, then apply power.

Patton CopperLink Auto-rate Ethernet Extenders are the perfect fit for cost effective simple and efficient LAN extension.


Features

  • Data Rates up to 45 Mbps—Get reliable broadband connectivity with full-duplex symmetric rates and distances exceeding 4.5 miles (7,300m)
  • 4 x 10/100 Ethernet Switch—Make up to 4 network connections easily. Built in MDI-X auto cross over switches eliminates messy and confusing cable configurations.
  • Transparent LAN Bridging—Passes higher layer protocols and supports 802.1Q VLAN tagging.
  • Automatic Learning, Aging and Filtering—Only allows packets with addresses outside the LAN to be forwarded.
  • MTU Support—1,792 bytes.
  • QoS, CoS, and VLAN Support—Ensure mission critical network connections are of top quality with advanced traffic management features.
  • WWW/SNMP Manageable—Built-in console port makes setup a snap, you can also use the embedded HTTP/SNMP agent to remote manage the unit from anywhere in the world.


Applications

Workgroup Ethernet extension application


Specifications

  • CopperLink Connector: Shielded RJ-45
  • Modulation: TC-PAM 32; 16
  • Ethernet Connectors: 4 x 8-position shielded RJ-45 • Auto-sensing 10/100Base-TX with half or full-duplex operation
  • MTU Support: 1,792 bytes
  • LAN Protocols: 802.1d Transparent Bridging, 2K MAC address learning bridge
  • VLAN Support: IEEE 802.1q VLAN Tagging • Port Based VLAN, up to 4K VLANs • VLAN Stacking (Q-in-Q)
  • QoS Support: Rate limiting rule-based/port-based • Traffic classification based on port/802.1p/DSCP (Differentiated Services Code Point) • WRR (Weighted Round Robin)/SPQ (Strict Priority Queing) scheduling algorithm
  • Management Connector: Web: Shielded RJ-45 • Console: Shielded RJ-45
  • Management Interface:
    • Web based GUI • CLI for local and console access; password protected
    • SNMP v1/v2 (RFC 1157/1901/1905) agent and MIB (RFC 1213/1493)
    • Software upgradeable via web-browser/TFTP
  • Front Panel Indicators: Power, Alarm, Diagnostic, WAN Link (x4), Ethernet Link (x4), Ethernet 100M (x4)
  • Power Supply: AC : Universal Input (UI)—90–240 VAC (50~60 Hz)
  • Compliance: FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC
  • Environment: Operating Temperature: 0 to 50° C; Storage Temperature: -40 to 85° C
  • Dimensions: 7.67L x 1.89W x 6.61D in. (195L x 48H x 168D mm)
  • Weight: 2.86 lbs (1.29 kg) without power supply
     

CopperLink™ 2160 Series Distance Chart

2-Wire Standard 2-Wire High Speed
Line rate
24 AWG (0.5 mm)
Line rate
24 AWG (0.5 mm)
kbps
miles
km
kbps
miles
km
192
5.2
8.3
384
2.0
3.2
256
4.7
7.5
512
1.9
3.0
512
4.2
6.7
1024
1.6
2.6
768
4.0
6.4
1536
1.5
2.4
1024
3.8
6.2
2048
1.4
2.3
1280
3.6
5.8
2560
1.3
2.1
1536
3.5
5.6
3072
1.3
2.1
2048
3.2
5.2
4096
1.2
2.0
2304
3.1
5.0
4608
1.2
2.0
3840
2.4
3.8
7680
1.0
1.7
4608
2.3
3.7
9216
0.9
1.5
5696
2.0
3.3
11392
0.9
1.4

 

ORDERING INFORMATION

Model Name

 Description

2162/EUI-2PK

   CopperLink Multi Rate 45 Mbps 8-Wire Ethernet Extender Kit (1 Local Unit and 1 Remote Unit) with power supplies