Loading...

DataConnect 2178MDEE Industrial 10/100BASE-TX Ethernet Extender – 2pack

SKU: 388 Category:

$2,159.00

Description

DataConnect 2178MDEE Industrial 10/100BASE-TX Ethernet Extender – 2pack                                

 

  • Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto- MDI/MDIX
  • Ethernet Extender (RJ-11 and Terminal) Port: Symmetrical on the VDSL, High-speed, Full-duplex up to 100Mbps communications link over exiting copper telephone wire
  • Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
  • Supports α-ring and RSTP/MSTP/STP for Ethernet redundancy
  • IP Multicast Filtering through IGMP Snooping V1, V2 & V3
  • Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP
  • 1p QoS with four priority queues
  • MAC-based trunking with automatic link fail-over
  • Supports IEEE802.3ad Link Aggregation Control Protocol, LACP
  • RS-232 console, Telnet, SNMP V1, V2c & V3, RMON, Web
  • Browser, and TFTP Management
  • Supports Command Line Interface in RS-232 Console
  • Supports IEEE802.1x Security
  • Bandwidth Rate Control
  • Per-port programmable MAC address locking
  • Up to 24 Static Secure MAC addresses per port
  • Port mirroring
  • Supports NTP
  • 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
  • Full wire-speed forwarding rate
  • -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for functional operation @ -40°C to 85°C (-40°F to 185°F)
  • Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
  • Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
  • Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
  • Ethernet Extender (RJ-11 and Terminal Block) Port: Symmetrical on the VDSL, High-speed, Full-duplex up to 100Mbps communications link over existing copper telephone wire
  • Operates transparent to higher layer protocols such as TCP/IP
  • Ten speeds with speed indicator LEDs on front panel of unit: A.Up to 50Mbps @ about 300meters (984ft.)B:1Mbps @ about 1,900meters (6,232ft.)
  • Redundant power inputs with Terminal Block and DC Jack-40°C to 75°C (-40°F to 167°F) operating temperature range
  • Hardened aluminum case
    Supports DIP switch to select Local or Remote mode
  • Supports DIN-Rail, Panel and Rack Mounting installation

 

         http://www.etherwan.com/images/cert/1.gif   http://www.etherwan.com/images/cert/1.gif   http://www.etherwan.com/images/cert/1.gif

The 2178MDEE Series Ethernet Extender enables the extension of Ethernet connectivity over existing copper pair allowing legacy infrastructure to be leveraged for IP networks and extending the Ethernet distance limitations of 100 meters.

Upgrading an existing legacy control or surveillance system to a new IP-based system is a complicated task, especially when existing cable infrastructure is old copper or twisted pair cable. 2178MDEE Series provides Ethernet connection and extension over these existing copper wire cables minimizing the expense of pulling new cable infrastructure.

The 2178MDEE Series is built with industrial grade specifications, providing wide temperature operation range from -20°C to 60°C to overcome industrial environments. Incorporating VDSL technology, the 2178MDEE’s RJ11 and terminal block extender ports provide long distance transmission with 50Mbps rate at 300 meters, or 1Mbps at 1900 meters; 10 speed LED indicators in the front panel provide easy lookup for the connection speed.

 

 

Dimensions

 

 

Application Diagram

 

 

 

 

Additional information

Weight 10.00 lbs
Dimensions 12.00 × 12.00 × 12.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

DataConnect 2178MDEE Features

StandardsIEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, Ethernet over VDSL,IEEE802.3x, IEEE802.1p, IEEE802.1Q, IEEE802.1w, IEEE802.1xForward and Filtering Rate14,880pps for 10Mbps
148,810pps for 100MbpsPacket Buffer Memory2M bitsProcessing TypeStore-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow controlAddress Table Size8192 MAC addresses

Input Input Voltage: 12 to 48VDC (Terminal Block); 12VDC (DC Jack)Power Consumption11W Max. 0.92A @ 12VDC, 0.46A @ 24VDCOverload Current ProtectionPresentReverse Polarity ProtectionPresentCasing Aluminum case
IP 30Dimensions60mm (W) x 125mm (D) x 145mm (H)
(2.36" (W) x 4.92" (D) x 5.7" (H))Weight1.1Kg (2.42lbs.)InstallationDIN-RailEthernet Port 10/100BASE-TX: 8 portsEthernet Extender PortsJ-11 and Terminal Block port : 2 ports
Speed: 1/3/5/10/15/20/25/30/40/50Mbps
Distance1. Speed: 1Mbps; Distance: 1,900m (6,232 ft.)
2. Speed: 3Mbps; Distance: 1,800m (5,904 ft.)
3. Speed: 5Mbps; 1,600m (5,249 ft.)
4. Speed: 10Mbps; Distance: 1,400m (4,593 ft.)
5. Speed: 15Mbps; Distance: 1,200m (3,936 ft.)
6. Speed: 20Mbps; Distance: 1,000m (3,280 ft.)
7. Speed: 25Mbps; Distance: 800m (2,624 ft.)
8. Speed: 30Mbps; Distance: 700m (2,296 ft.)
9. Speed: 40Mbps; Distance: 600m (1,968 ft.)
10. Speed: 50Mbps; Distance: 300m ( 984 ft.)Cable: Telephone wire 24 AWG (Minimum 0.5mm diameter, 1-pair wire)LED Indicators Per Unit: Power Status (Power 1, Power 2, Power 3)
Per Port: 10/100TX: Link/Activity, Speed
Extender Port: LinkDIP switch One DIP Switch: Local (CO) or Remote (CPE)Alarm Contact One relay output with current 1A @ 24VDCOperating Temperature-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)Storage Temperature-40°C to 85°C (-40°F to 185°F)Ambient Relative Humidity5% to 95% (non-condensing)ISO Manufactured in an ISO9001 facility
EMI FCC Part 15, Class A
EN61000-6-4
– EN55022
– EN61000-3-2
– EN61000-3-3EMS EN61000-6-2
– EN61000-4-2 (ESD Standards)
Contact: + / 6KV
Air: + / – 8KV
– EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 1000MHz; 80% AM
– EN61000-4-4 (Burst Standards)
Signal Ports: + / – 4KV
D.C. Power Ports: + / – 4KV
– EN61000-4-5 (Surge Standards)
Signal Ports: + / – 1KV; Line-to-Line
D.C. Power Ports: + / – 0.5KV; Line-to-earth
– EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15 – 80MHz; 80% AM
D.C. Power Ports: 10Vrms @ 0.15 – 80MHz; 80% AM
– EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60HzEnvironmental Test Compliance:IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10 – 150Hz, Amplitude 0.35mm (Operation/Storage/Transport)IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)FED STD 101C Method 5007.1 (Free fall w/ package)
-Tested with Cross Weight and Drop High standard table