Loading...

Patton SmartNode M-ATAMicro Analog Telephone Adapter

SKU: 1621 Category:

$115.00

Description

Overview

 

The SmartNode Micro Analog Telephone Adapter provides connectivity for analog phones to a home, home office or corporate LAN. Connecting to any analog phone or PBX, the

 

 

SmartNode product is ay cost effective solution for small offices and telecommuters to access Internet-based telephone services and corporate intranet systems across established LAN and Internet connections like xDSL and cable modems.

The M-ATA provides one Ethernet (RJ-45) port and one FXS (RJ-11) analog phone port for quick and easy interconnection to the local LAN. LEDs show at-a-glance the status of the system, LAN, WAN, and phone ports.

A full suite of IP features (DHCP, NAT/PAT) are available to maximize universal connectivity. VLAN tagging and prioritization enables voice traffic to be handled before data traffic insuring higher quality voice calls. Support for PPPoE tunneling simplifies extending corporate intranet services to telecommuters.

The user friendly web interface offers two levels of configuration; level one covers basic subscriber specific parameters, level two offers advanced settings for the transport network. Configuration and firmware can be downloaded from a centralized TFTP or HTTP server.

The M-ATA is SIP standard compliant. Analog phones attached to the

 

SmartNode can use advanced calling features such as call forwarding, caller ID, 3-way calling, call holding, call retrieval and call transfer.

 

 

Applications

 

Patton's Micro Analog Telephone Adapter provides seamless access to Internet telephony and data services. The M-ATA connects to any broadband access provider via a cable or xDSL modem.

 

 

 

 

SmartLink M-ATA application diagram

 

Additional information

Weight 2.00 lbs
Dimensions 5.00 × 5.00 × 5.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Features

  • Ultra-Miniature—Smallest full-function analog telephone adapter available today!
  • Supports Over 20 Voice Calling Features—Call waiting, call conference, caller ID, hotline, distinctive ring and more!
  • NAT, DHCP, PPPoE—Provides maximum connectivity across firewalls and transport networks.
  • SIP Signaling—Deploy into any multimedia, interactive, or softswitch network with the leading call and session signaling protocol.
  • Toll Quality CODECs—Use standard G.711 or G.726 CODECs for toll-quality voice, or G.723 or G.729 for low-bandwidth applications.
  • Centralized Management—HTTP/SNMP manageable from any location.

    Specifications

    Voice Connectivity

    2-wire Loopstart, RJ-11/12 * Short haul loop 1.1 km @3REN * Caller-ID Type-1/2 FSK and ITU V.23/Bell 202 generation

    Connectivity 1 10/100Base-TX Full Duplex/Autosensing Ethernet RJ-45
    Voice Processing (signalling dependent)

    SIP * Voice CODECS (G.711 A-Law/?-Law (64 kbps); G.726 (ADPCM 40, 32, 24, 16 kbps); G.723.1 (5.3 or 6.3 kbps); G.729ab (8 kbps)) * G.168 echo cancellation * 2 parallel voice connections * DTMF detection and generation * Carrier tone detection and generation * Silence suppression and comfort noise * Configurable dejitter buffer * DTMF in-band & out-of-band * Configurable transmit packet length * RTP/RTCP (RFC 1889) * STUN

    Voice Services/Features

    Anonymous CallerID block * Call blocking * Call forward – on busy * Call forward – selective * Call forward – unconditional * Call hold/retrieve * Call return * Call transfer – blind * Call transfer – with consultation * Call waiting/retrieval * Caller-ID * Conference drop * Conferencing (3-way calling) * Distinctive ring * Do not disturb * Hotline calling * Incoming CallerID on/off * IP URL dialing * Message waiting indication * Self-caller ID block * Speed dial * Voicemail message retrieval * Warmline calling

    IP Services

    NAPT * DHCP client * PPPoE * Programmable static routes * ICMP redirect (RFC 792); Packet fragmentation * VLAN support 802.1p/q

    Call Routing & Services Regular expression number matching * Regular expression number manipulation * Least Cost Routing Number blocking * Short-Dialing * Digit collection * Distribution-Groups & Hunt-Groups * 2nd call offering
    Management

    Browser configuration interface * Multilevel security access * TFTP & HTTP configuration & firmware loading * SNMP v2 agent * Syslog support

    Power 100?240 VAC (50/60 Hz)
    Temperature 0 to 40?C (32 to 104?F)
    Humidity Humidity: Up to 90% (non condensing)
    Dimensions 3.8 L x 1.65 W x 0.75 H in. (9.7 L x 4.2 W x 1.9 H cm.)
    Weight 68 grams (2.4 oz)
    Compliance

    EMC compliance: EN55022 and EN55024 * Safety compliance: EN 50950 * CE compliance * FCC Part 15 Class B

    Ordering Information

     

    # Model # Description Availability
    1 M-ATA-1A/EUI Micro Analog Telephone or Fax Adapter; 1x FXS RJ11; 1x 10/100BaseTX, SIP, incl. ext. PS General Availability
     
    12-129 North American plug for interchangeable power supplies
    12-130 European plug for interchangeable power supplies
    12-131 United Kingdom plug for interchangeable power supplies
    12-132 Australian plug for interchangeable power supplies
    12-201 Korean plug for interchangeable power supplies
    12-202 India/South Africa Type D plug for interchangeable power supplies