Loading...

Patton 1004A Self-Powered, High Speed, Multipoint Modem

SKU: 968 Category:

$97.50

Description

Overview
The Model 1004A 2/4 wire short range modem is the next generation replacement forour popular Model 1004. The Model 1004A still gives you up to 50 terminal dropsover one (half duplex) twisted pair, and still supports async data rates up to 115.2kbps. It also passes data plus one control signal in each direction, just like the Model 1004. However, the Model 1004A now gives you more flexibility, with extra configuration parameters: Two separate high/low impedance settings, echo on/off and selectable RTS/CTS delay are now standard, as well as selectable carrier control and a DCE/DTE switch. Also standard on the new Model 1004 is 600 wats per wire of Silicon Avalanche Diode surge protection (no need to add an S to the model number when ordering).The Patton Model 1004A- it's the same short haul you've come to depend on, only better!

 

Features

  • Point-to-Point or Multipoint Operation over 2 or 4 Wires
  • Multidrop up to 50 Terminals
  • Async. Data Rates to 115.2 Kbps
  • Range to 9 Miles (14.5 Km) on 19 AWG at 1.2 kbps
  • Transmits and Receives Data plus One Control Signal Each Way
  • Selectable RTS/CTS Delay
  • Operates with or without Echo
  • Two Separate Impedance Settings
  • Carrier ON or RTS Controller
  • No AC Power or Batteries Needed
  • FCC Approved – Part 15 Class A
  • Surge Protection Now Standard
  • Made in the USA — This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.

 

Applications

  • Transmission Format: Asynchronous
  • Data Rate: Up to 115,200 bps
  • Transmit Line: 2, 4 wire unconditioned twisted pair
  • Transmit Mode: Full or half duplex
  • Transmit Level: 0 dBm
  • Range: Over 9 miles (14.5 km)
  • Dimensions: 2.66 x 2.10 x 0.73 in. (6.8 x 5.3 x 1.9 cm)
  • Surge Protection: 600W power dissipation for up to 1 msec
  • Control Signal: DSL turns "ON" immediately after the terminal raided DTR; DCD turns on after recognizing the receive signal from the line; CTS turns on 8 msec after the terminal raises RTS
  • Power: None required, uses ultra low power from EIA data and control signals
  • Carrier: The carrier is a strap selected for continuous operation or controlled by RTS

ORDERING INFORMATION

Model Name

 Description

1004AF 

     MINI CARRIER CONTROLLED LINE DRIVER

Other models available at same price

1004AFDR11 MINI CONTROLLED LINE DRIVER DUAL RJ-11
1004AFRJ11 MINI CONTROLLED LINE DRIVER W-RJ11
1004AFRJ45 MINI CONTROLLED LINE DRIVER W-RJ45
1004AM MINI CARRIER CONTROLLED LINE DRIVER
1004AMDR11 MINI CONTROLLED LINE DRIVER DUAL RJ-11
1004AMRJ11 MINI CONTROLLED LINE DRIVER W-RJ11
1004AMRJ45 MINI CONTROLLED LINE DRIVER W-RJ45

Additional information

Weight 5.00 lbs
Dimensions 6.00 × 4.00 × 4.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.