Loading...

Patton 1069/DV/EUI VDSL2 Bridge

SKU: 1004 Category:

$226.97

Description

Features
--Image: Made in USA --

  • Support of 100-Mbps Symmetrical Line Rate—Provides near fiber performance for bandwidth intensive applications such as Triple Play services.
  • Operates Over Twisted Pair—Reduces the cost and hassles of new installations. Uses installed voice-grade twisted pairs to eliminate the expense of installing network or fiber cable.
  • Flexible Configurations—Can operate either point to point (configurable as CO/CP), with Patton's 24 port VDSL2 DSLAM FF3210P or any third-party VDSL2 compliant DSLAM.
  • Full VDSL2 Profile Support—Support for 8a, 8b,8c, 8d, 12a, 12b, 17a, and 30a. Band plans 997 & 998.
  • On-board POTS/ISDN Splitter—Reliably connect to POTS/ISDN services. Allows for a smooth transition from traditional telephony to VoIP. 

Overview

Patton’s Model 1069 VDSL2 Bridge leverage existing copper infrastructure, providing up to 100 Mbps symmetrical links over telephone grade twisted pair. Providing up to 100 Mbps of symmetrical data makes the Patton Model 1069 the perfect solution for delivering Triple Play communications services and other bandwidth-intensive applications.

The Model 1069 is fully compliant with the VDSL2 standards ITU-T G.993.1, G.993.2, ANSI T1.424 and ETSI TS 101 270-1, 270-2. Support for all VSDL2 profiles including 8a, 8b,8c, 8d, 12a, 12b, 17a, and 30a make the Model 1069 the ideal VDSL2 CPE for various MxU and FTTx type installations. An on-board POTS splitter allowing users to download files from the Internet, surf the WWW, and answer e-mail messages while talking on the phone or faxing documents.

Configuration is a snap when used together with Patton’s VDSL2 DSLAM, the ForeFront Model 3210P. Through the use of OAM (Object Access Method), the Model 1069 is fully configurable via the DSLAM. The CPE will auto rate adapt to the highest available bandwidth allowable by the FF3210P. The Model 1069 is also fully compatible with any third-party VDSL2 compliant DSLAM. 

Applications

Using Patton’s FF3210P or any third-party DSLAM, full-service high speed links can be routed through campus and various MxU environments. VDSL2 DSLAMs aggregate the IP services delivered from the ISP or service providers with the POTS delivered from the PSTN. The POTS and Ethernet signals are then aggregated and sent over an existing 2-wire telephony grade connection. The Model 1069 VDSL2 CPE is placed in each room to split the signal back into Ethernet (data) and POTS/ISDN (voice) for delivery to the end-user. Port selectable data rates allow for a differentiation of services, and increased distance capabilities.

 

Specifications

VDSL2 Line Interface
 
RJ-45
 
POTS-ISDN Interface
 
RJ-45
 
Ethernet Interface
 
4 x 10/100; RJ-45
 
Modulation
 
DMT per ITU-T G.993.2 • EoVDSL per 802.3ah with 64B/65B framing
 
Profile Support
 
8a/8b/8c/8d/12a/12b/17a/30a
Band Plans 997 and 998
 
Transmission
 
Up to 100 Mbps symmetrical line rates
 
Frequency Range
 
Up to 30 MHz
 
LED Indicators
 
Power, error, VDSL status, and Ethernet Uplink Status x 4
 
Management
 
DIP switch or In-Band from DSLAM
 
Power Supply
 
External AC: 120–240 VAC (50–60 Hz) or -48VDC (-42 to 56V)
 
Compliance
 
EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC; CE Mark
 
Environment
 
Operating temp.: 50 to 122°C (10 to 50°C) Humidity: 10 to 90%, non-
condensing
Dimensions
 
6.2L x 4.75W x 1.25H in (157L x 120.7W x 31.8H mm)
 
Weight
 
9.2 oz (261 g)
 

 

ORDERING INFORMATION

 

Model Name

 Description

1069/DV/EUI

    VDSL2 Bridge, w/built in POTS/ISDN splitter; 4 port switch; External 100-240 VAC

Additional information

Weight 0.58 lbs
Dimensions 6.20 × 4.75 × 1.25 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.