Loading...

Esteem 195M

SKU: 1769 Category:

$1,682.00

Description

The ESTeem 195M is the perfect industrial wireless solution for a wide range of modes of operation, including wireless Ethernet bridge, point-to-point networking, point-to-point wireless bridge and remote repeaters.

We engineered these Ethernet/serial radios specifically for the rigorous Industrial, Public Safety, and Federal markets when terrain coverage requires the VHF band. With the 195M industrial wireless unit, you have access to Ethernet, Serial RS-232C, RS-422, RS485 and 4 Channel Sensor Interface, all in a single modem.

A narrowband-compliant licensed radio, the Model 195M provides downward compatibility to the ESTeem Model 192M/MHP series and delivers reliable communications over distances greater than 10 miles in high noise environments, depending on the antenna deployed. Because the Model 195M’s internal Digi-Repeating feature creates possible repeater sites out of all remote locations, you can use these serial radios to establish wireless networks over large geographical areas.

Whether you require a wireless Ethernet bridge or downward compatibility with older ESTeem serial radios, the Model 195M provides the reliable communications you need. Review the literature below and then be sure to contact us for the industrial wireless devices to solve your most difficult communications challenges.

Additional information

Weight 5.00 lbs
Dimensions 12.00 × 12.00 × 10.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Features

  • 10+ Mile Nominal Range
  • Industrial Hardened Case
  • Direct Outdoor Pole Mountable
  • Extended Temperature Specifications
  • Ethernet Communications Port
  • Serial RS-232 Communications Port
  • Rs-422 and RS-485 Communications Port
  • 4 Channels of 4/20mA Sensor Input

Modes of Operation

  • Ethernet Bridge Mode
  • Point-to-Point
  • Point-to-Multipoint
  • Repeater Modes
  • Legacy Product Support with Model 192M and 192MHP

Software Features

  • Pole Mounting. Remote pole mounting allows the 195M to greatly reduce the installation cost and increase wireless performance.
  • Protocol Emulations. The 195M industrial wireless router has protocol drivers for most major PLC manufacturers, providing transparent operation of the controllers while at the same time enabling the 195M to use any remote location as a repeater.
  • Multiple Repeaters. Not only can any remote 195M be used as a repeater, but the model also supports multiple repeaters in a single network.
  • Multiple Modes of Operation. Our Model 195M Ethernet/serial radios can function as Master, Remote, Repeater, or Remote/Repeater nodes for added flexibility.
  • Model 192 Series Compatibility. The 195M is downward compatible to operate as a remote in a serial network with the ESTeem Models 192M or 192MHP.
  • Spectrum Analyzer. The 195M and Software Configuration utility provide a full feature spectrum analyzer for the 150-174 MHz frequency band

http://www.esteem.com/wp-content/uploads/uploads/AnalyzerMarker.jpg

Latest 195M Firmware Version

Current Firmware Releases:  The 195 Narrow Band radios have three optimized firmware versions based upon their primary use (Ethernet, Serial or 192 Compatibility).  All three firmware versions are loaded in the ESTeem Discovery Suite and can easily be selected when configuring the radios.

Ethernet Optimization – Firmware Version: 201905160829
Serial & PLC Protocol Optimization – Firmware Version: 201905160828 (Loaded by Default)
Legacy 192 Compatibility – Firmware Release: 201905160827

For instructions on how to update the modem, please contact ESTeem Customer Support at 301.924.7400 x25 or follow the procedure in the User’s Manual.  All firmware updates are contained in the ESTeem 195 M/H/C Configuration Utilities which can be found an the following location.  No additional downloads are required.

  • ESTeem Discover Suite and Configuration Utility
  •  

Technical Specifications

 

 

 

Transmiter/Receiver

 

 

Frequency of Operation (Software Selectable)

150-174 Mhz (6.25KHz / 12.5 KHz Channel Spacing)

 

Frequency Stability, -30C to +60C

+/- 0.2ppm

 

RF Data Rate @ 12.5Khz channel spacing

(4.8Kbps @ 6.25KHz) (9.6Kbps @ 12.5KHz)

 

Tx Output Power (Software Adjustable)

0.5 to 4 Watts

 

Tx Output Impedance

50 ohms

 

Rx Sensitivity

(-110dBm)

 

FCC ID

ENPESTEEM195M

 

 

LED Indicators

 

 

 

 

Data Packet Information

 

 

Radio Addressing

 

Data Packet Size

Serial Data Interface Buffer Size

 

 

 

 

Power (48VDC, 12V-Aux), Status Multi-Color LED (Tx, Rx, Rx-Valid, Rx-Error), RS-232 Tx/Rx, RS-485 Tx/Rx, RS-422 Tx/Rx, Ethernet Activity / Link

 

 

 

 

1-254 Total Units, Digi-repeating allows up to 3 repeaters between end-points

1-2000 Bytes

8K bytes Tx / 8K bytes Rx

 

 
 

Power Requirements

Receive / Without Ethernet Link

Receive / With Ethernet Link

Transmit @ 4 Watts RF Output

 
120 ma @ 12 VDC

160 ma @ 12 VDC
1540 ma @ 12 VDC

 

 

External 48 VDC Power Supply, EST P/N (AA175.3)

 

30 Watts, RJ-45 Connector, Cat 5 Cable (300 Ft Maximum)

 

External DC Power Input

10.8 to 15 VDC

 

Input/Output Connectors

 

 

Ethernet Port (10/100)

RJ-45 Female

 

Serial Data Interfaces (One of four selectable)

RJ-45 Female

 

Antenna Input/Output

TNC Female Connector

 

External DC Input Power

Mini-Combicon, 3 pin female

 

Protocols

 

 

Serial Data Interface, Master PLC mode protocols supported by auto-digi-repeater function
 

Allen Bradley DF1, Opto22, Modbus RTU/ASCII, and Transparent protocols
 

 
 

Ethernet Interface protocols supported for remote access via ARP proxy on Master Gateway Unit
 

ICMP Echo (ping), Modbus/TCP (Aux Voltage, 4-20mA readings, RSSI, MCU
Core Temperature), Remote Configuration

 

 
 

Ethernet Interface protocols (direct access only)

 

Telnet, IP Configuration, Firmware upgrades
 

 

 

Mechanical / Environmental

 

 

Temperature Range 

-30° to +60° C

 

Humidity

95% Non-condensing

 

Dimensions

1.9 in. H x 6.7 in. W x 6.2 in. L

 

Weight

1.25 lbs.

 

Product Warranty

1 Year

 

Options

 

 

Outdoor Pole Mount Kit

AA195PM

 

48 VDC Power Supply

AA175.3

 

RJ-45 To DB9 Serial Adaptor

AA0621.1

 

RJ-45 To Terminal Block Adaptor

AA066

 

Antennas/Surge Protectors/Cables, etc.

Contact Data Connect for various options at sales@data-connect.com or call 301.924.7400 x.17

 

Esteem 195M