Loading...

FiberPlex 1000 Base-T Ethernet FOI-1GBT

SKU: 1411 Category:

$897.60$1,183.20

Description

Overview

The FOI-1GBT provides complete electrical isolation for 1000BASE-T Gigabit Ethernet communications. The unit has an automatic MDI/MDIX switch over capability that allow users to use either a straight or crossover cable for all LAN configurations. The copper interface is fully automatic. If TP+ and TP- are reversed, the unit will automatically swap the polarity internally. Similarly, if the transmit and receive pairs are reversed, the unit will automatically swap both pairs internally. Therefore, either a crossover or straight cable can be used.

The unit can be used in areas of high electrical noise or in and out of RF shielded enclosures. The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. Privacy of communications is also enhanced because the fiber optic cable does not radiate any emissions. In addition, fiber optic cable offers much longer transmission distances than copper wiring. Traditional 1000BASE-T Cat5e cabling is limited to a maximum distance of 100m, but multimode optics on the unit can extend the distance to 550m, while singlemode optics can further extend the distance to 5km.A typical link consists of two FOI-1GBT, one at each end of the network, with a duplex fiber optic cable between them.

Flexible Mounting and Powering Options

The FOI-1GBT is part of the FOI line of products designed for ruggedized mil applications. It is housed in the familiar FOI shielded can enclosure. For standalone applications it can be powered by adding a PSQ-4909 AC supply or a PSQ-4920 DC power supply (not included). Optionally, up to 8 FOI units can be mounted on CMA chassis adapters and installed in an RMC-3101 or RMC-2101 rack mount chassis. The units are powered redundantly by a common back plane connection.

Additional information

Weight 5.00 lbs
Dimensions 5.00 × 5.00 × 5.00 in
Model

FOI-1GBT-S-ST, FOI-1GBT-ST

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Features

  • 1000BASE-T Ethernet to Fiber Converter
  • Compliant with: IEEE 802.3ab
  • Optically compatible with Ethernet optical standards

Specifications

ELECTRICAL SPECIFICATIONS
 
Min
Typ
Max
Power Requirement Voltage Range (V)
7
9
12
Supply Current (mA)
250
 
Data rate 100 Mbps
Line Encoding PAM5 (Pulse Amplitude Modulation 5)
 
Environmental Storage Temperature (°C)
-40
85
OperatingTemperature (°C)
0
50
 
Interface Connector RJ-45
PHYSICAL SPECIFICATIONS
 
Length
Width
Height
Weight
Case Dimensions Size 4
4.5 in (114 mm)
1.453 in (37 mm)
2.562 in (65 mm)
2 lb (0.9 kg)
OPTICAL CHARACTERISTICS
Fiber
Size
Max Distance
Wavelength
Output Power
RX Sens Loss Budget
Multimode
62.5 / 125 µm
2 km (10Base) 300m (100Base)
820 nm
-18 dBm
-30 dBm 12 dB
Singlemode 9 /125 µm 20 km 1300 nm -15 dBm -32 dBm 17 dB

Ordering Information

 

oi_FOI-1GBT.png