Loading...

Patton 2174/EUI-2PK

SKU: 983 Category:

$650.00

Description

Overview
Perfect for bandwidth-intensive applications the Model 2174 delivers off-the-chart symmetrical line rates greater than 100 Mbps. Best of all—like all CopperLink™ products—the Model 2174 leverages existing copper infrastructure to deliver high speed Ethernet connectivity over voice-grade twisted pair, Cat 5e/6/7, and—new to the CopperLink™ line—coaxial cabling. 

Four user-selectable configuration profiles—combined with Patton’s auto-rate adaptation feature—ensure maximum achievable symmetrical or asymmetrical rates for the installed noise environment, wire gauge/type and length. 

Symmetrical line-rate settings are ideal for such applications as remote LAN extension, video teleconferencing, and data backhaul. Asymmetrical configurations are well-suited for applications requiring higher downstream speeds and/or longer distances between Ethernet devices. Typical symmetrical scenarios include medical imaging, livestock monitoring, underwater video, internet gaming, and transporting high-resolution IP video from security cameras. 

Realize fiber-like speed and distance without the expense of fiber with Patton’s Ultra-High-Speed CopperLink™ Ethernet Extenders. 

Features

  • Ethernet Extension—Extend 10/100Base-TX Ethernet up to 10,000 feet (3 kilometers)—well beyond the 328-foot (100-meter) limitation—over a single twisted-pair, Cat 5e/6/7, or even coaxial cable.
  • Operates Over Twisted Pair—Realize fiber-optic speeds without the expense—and hassle—of installing new cables or line-of-site wireless circuits.
  • Plug and Play—Set these units up straight out of the box. No configuration is required. Auto-sensing 10/100 Ethernet ports support full or half duplex operation.
  • Multiple Line Rates Supported—Boasting downstream line rates up to 168 Mbps, the switch-selectable rate mode options optimize rate and reach for the noise environment, wire gauge/type and length.
  • Transparent LAN Bridging—Bypass network configuration requirements by transparently passing all higher layer protocols—including 802.1Q VLAN frames (tagged and untagged). Data-transmission mechanism is fully transparent to such IP video compression schemes as MPEG-4, H.264 and MJPEG.

Applications
Workgroup Ethernet Extension Application
A built-in 4-port Ethernet switch makes the CopperLink Model 2174 ideal for delivering multiple IP information streams over a single cable. For example, at a guardhouse or security kiosk, you could aggregate IP data from a laptop, a motion sensor, and two high resolution IP video cameras for simultaneous transmission over a single Ethernet connection. 

Combining data flows from up to four network-enabled devices onto a single twisted pair or coax cable, the Model 2174 can deliver IP traffic up to 4,250 ft (1295 m) away—well beyond the standard 328-foot (100-meter) Ethernet distance limitation. 

With achievable line rates up to 100 Mbps, the CopperLink 2174 eliminates the bandwidth constraints commonly experienced with other copper-based transmission technologies. The Model 2174 is engineered to re-use existing infrastructure previously employed in legacy applications including alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV. Many newer cabling standards are also supported, including Cat 5e, Cat 6 and Cat 7. 

Specifications

CopperLink Line Interface • RJ-45 (pin 4 = ring; pin 5 = tip)
• BNC 75-ohm coax
• Terminal block, 2-position
 
CopperLink Line Modulation DMT (Discrete Multi-Tone) 
Ethernet Interface (x4) 8-position shielded RJ-45. Auto-sensing 10/100Base-TX with half or full duplex operation.
 
Protocol Transparent to high layer protocols: supports 802.1Q VLAN tagged or untagged frames. Transparent to IP Video schemes: fully transparent to such compression schemes as MPEG-4, H.264, and MJPEG.
 
Ethernet Interface (x4) 8-position shielded RJ-45. Auto-sensing 10/100Base-TX with half or full duplex operation.
 
Impulse Noise Protection Modes Selectable fast and interleave modes
 
Target SNR Modes 6 dB & 9 dB
 
Management 8-position DIP switch
 
Monitoring 8 LEDs display Power, Link, Ethernet 1-4, Remote, and Local status.
 
Dimensions 1.25 H x 6.22 W x 4.75 D in. (31.8 H x 158 W x 120.7 D cm)
 
Power Supply External AC: 100–240 VAC 
 
Compliance FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC
 
Environment
Temperature: 0 to 50°C
Humidity: 5 to 95%, non-condensing
Extended Temperature: -40 to 85°C (Model CL1214E)
Extended Humidity: Up to 85% condensing (Model CL1214E/CC)
 
Weight 0.4 lbs (181 g)

Specifications: Rate and Reach

Long Range Asymmetrical
Length
feet (m/km)
Mbps
Downstream
Upstream
250 (76m)
67
16
1000 (305m)
59
16
2000 (610m)
45
11
3000 (914m)
31
5
5000 (1.5km)
17
682 kbps
10,000 (3km)
4
263 kbps

 

High Speed Asymmetrical
Length
feet (m/km)
Mbps
Downstream
Upstream
250 (76m)
168
95
1000 (305m)
126
54
2000 (610m)
60
21
3000 (914m)
42
6
3500 (1km)
35
1

 

Long Range Symmetrical
Length
feet (m/km)
Mbps
Downstream
Upstream
250 (76m)
68
50
1000 (305m)
62
44
2000 (610m)
50
16
3000 (914m)
33
4
5000 (1.5km)
16
2
10,000 (3km)
2.5
1

 

High Speed Symmetrical
Length
feet (m/km)
Mbps
Downstream
Upstream
250 (76m)
121
144
1000 (305m)
73
103
2000 (610m)
45
37
3000 (914m)
36
10
3500 (1km)
30
4

Additional information

Weight 5.00 lbs
Dimensions 18.00 × 12.00 × 7.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.