Loading...

2178HSEE-C-G.V-GB

SKU: 4357 Category:

$0.00

Description

High Performance Industrial Gigabit Ethernet Extender 

To fulfill the needs of long distance and higher speed required Ethernet over Coaxial or 2-wired UTP applications, Data-connect offers a new Industrial Ethernet Extender, 2178HSEE-C-G.V-GB. It features one BNC port and one RJ11 port for long-distance connection with the VDSL2 (Very-high-bit-rate Digital Subscriber Line 2) technology, and 4 10/100/1000BASE-T RJ45 Ethernet ports. Its slim-sized metal housing makes the placement of the unit convenient. Working well with a pervasive coaxial or RJ11 network, the 2178HSEE-C-G.V-GB provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.2km. 

If the IP network that consists of HD IP camera, wireless access point, NVR and digital signage display requires an extension of beyond the 100-meter distance, the 2178HSEE-C-G.V-GB will be the best option as it can transmit data over the coaxial cable or telephone wire. A 100-meter distance can only be extended on an UTP cable.

Superior Upstream and Downstream Transmission

The design of the 2178HSEE-C-G.V-GB is based on the two-core networking technology, Gigabit Ethernet and VDSL2. The 2178HSEE-C-G.V-GB offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes — asymmetric mode or symmetric mode — for the transmission of upstream and downstream signals.

  • Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps
  • Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps

The symmetric mode provides the similar transmission rate on both downstream and upstream while the asymmetric mode performs higher transmission quality in short range. In all, when the 2178HSEE-C-G.V-GB is in the symmetric mode, it provides a better upstream performance, and when it is in the asymmetric mode, it gives a better downstream performance.

Ethernet over Long Distance Existing Coaxial or RJ11 Cable

The 2178HSEE-C-G.V-GB is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from the existing analog system to full digital system.  It features two types of transmission, the coaxial or RJ11. A normal UTP cable can only be extended up to 100 meters, but with the 2178HSEE-C-G.V-GB, the distance for Ethernet networking can be extended up to 1,200 meters (3,937ft.), which is ideal for the following network applications:

  • Long-distance IP network devices
  • IP digital signage 
  • Cable TV to IPTV
  • Distance video education
  • Electronic billboards
  • Other applications

If you have coaxial or RJ11 cable in your existing environment, you can install a pair of the 2178HSEE-C-G.V-GB very simply without the need to build additional network wires, thus saving costs for network construction.

Easy and Flexible Installation

The 2178HSEE-C-G.V-GB offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one 2178HSEE-C-G.V-GB in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better.

ADSL2+ Fallback

For ISPs  providing ADSL broadband services, the 2178HSEE-C-G.V-GB can support a downstream rate of up to 24Mbps and an upstream rate of 1Mbps with the ADSL2+ technology. The 2178HSEE-C-G.V-GB can also be directly switched over to VDSL2 after the network upgrade.

Additional information

Weight 1.00 lbs
Dimensions 7.00 × 3.00 × 5.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Point-to-Point Application — LAN to LAN Connection

One set of the 2178HSEE-C-G.V-GB could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one 2178HSEE-C-G.V-GB must be Master (CO mode) and the other one is Slave (CPE mode).

Community/Campus Surveillance and Security over IP

To take advantage of digital surveillance system and keep the benefits of coaxial cable/RJ11 of the 2178HSEE-C-G.V-GB, communities, campuses and enterprises can upgrade their analog camera system to IP camera surveillance system without using additional new wires. As the 2178HSEE-C-G.V-GB comes with one RJ45 port and one BNC Ethernet over Coaxial port, just plug in the UTP cable of IP camera to the Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.

Long Reach Ethernet

  • ITU-T G.993.5 G.Vectoring and G.INP
  • Upstream/Downstream bandwidth up to 200/100Mbps
  • CO/CPE mode selectable via DIP switch
  • Selectable target band plan and SNR margin
  • One BNC/RJ11 connector for VDSL connection
  • Uses existing RG59/RG6 coaxial cable
  • Used in pairs to extend Point-to-Point connection up to 1.2km
  • Supports IEEE 802.1Q VLAN tag transparency

Industrial Case and Installation

  • Slim-type IP30 metal case
  • DIN rail and wall-mount design
  • 12 to 48V DC, redundant power with polarity reverse protect function
  • AC 24V power adapter acceptable
  • Supports 6000 VDC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  • Minimum installation time (Simply by Plug and Play)
  • Supports extensive LED indicators for network diagnosis
Hardware Specifications
TP interface 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
VDSL BNC 1 BNC female Ethernet over Coaxial port
Cabling:
Coaxial cable: 75 ohm
RG-6/U cable, less than12Ω/1000 ft
RG-59/U cable, less than 30Ω/1000 ft.
Maximum Distance:
Max. 1.2km with data transmission (3,937ft.)
VDSL RJ11 1 VDSL2/ADSL2+ RJ11 female phone jack
Twisted-pair telephone wires (AWG-24 or better) up to 1.2km (3,937ft.)
DIP Switch & Functionality DIP-1: Select CO or CPE mode
DIP-2: Select G.INP or Interleaved mode
DIP-3: Select Band Profile (Asymmetric or Symmetric)
DIP-4: Select SNR of 12dB or 8dB
LED Indicators Power 1/Power 2: Green
FAULT: Red
1000BASE-T LNK/ACT: Green
10/100BASE-TX LNK/ACK: Green
VDSL: Green
CO: Green
CPE: Green
ESD Protection 6KV DC
Enclosure IP30 slim metal case
Installation DIN-rail kit or wall-mount ear
Dimensions (W x D x H) 32 x 135 x 87.8mm
Weight 185g
Power Requirement DC input: Dual 12~48V DC, 0.4A max.
24V AC
Power Consumption 5.7 watts
Performance

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Upstream/ Downstream

Performance Table with RJ11 Cable

  • CO, Interleave, Asym, 8dB
  • 200M -> 93Mbps/190Mbps
    400M -> 67Mbps/164Mbps
    600M -> 38Mbps/116Mbps
    800M -> 24Mbps/59Mbps
    1000M -> 9Mbps/45Mbps
    1200M -> 6Mbps/30Mbps
  •  
  • CO, Interleave, Sym, 8dB
  • 200M -> 143Mbps/148Mbps
    400M -> 118Mbps/119Mbps
    600M -> 71Mbps/75Mbps
    800M -> 49Mbps/36Mbps
    1000M -> 21Mbps/25Mbps
    1200M -> 16Mbps/24Mbps
  •  
  • G.INP, ASym, 8dB
  • 200M -> 92Mbps/190Mbps
    400M -> 68Mbps/165Mbps
    600M -> 37Mbps/112Mbps
    800M -> 27Mbps/56Mbps
    1000M -> 9Mbps/46Mbps
    1200M -> 5Mbps/31Mbps
  •  
  • G.INP, sym, 8dB
  • 200M -> 143Mbps/148Mbps
    400M -> 116Mbps/115Mbps
    600M -> 71Mbps/69Mbps
    800M -> 49Mbps/32Mbps
    1000M -> 19Mbps/27Mbps
    1200M -> 16Mbps/23Mbps
  •  
  • CO, Interleave, Asym, 12dB
  • 200M -> 85Mbps/174Mbps
    400M -> 59Mbps/146Mbps
    600M -> 28Mbps/94Mbps
    800M -> 22Mbps/49Mbps
    1000M -> 7Mbps/40Mbps
    1200M -> 3Mbps/28Mbps
  •  
  • CO, Interleave, Sym, 12dB
  • 200M -> 132Mbps/126Mbps
    400M -> 103Mbps/104Mbps
    600M -> 59Mbps/60Mbps
    800M -> 38Mbps/27Mbps
    1000M -> 15Mbps/24Mbps
    1200M -> 6Mbps/20Mbps
  •  
  • G.INP, Asym, 12dB
  • 200M -> 85Mbps/174Mbps
    400M -> 57Mbps/144Mbps
    600M -> 28Mbps/94Mbps
    800M -> 22Mbps/49Mbps
    1000M -> 7Mbps/40Mbps
    1200M -> 3Mbps/28Mbps
  •  
  • G.INP, Sym, 12dB
  • 200M -> 129Mbps/136Mbps
    400M -> 99Mbps/96Mbps
    600M -> 61Mbps/55Mbps
    800M -> 39Mbps/24Mbps
    1000M -> 15Mbps/26Mbps
    1200M -> 12Mbps/20Mbps
Upstream/ Downstream Performance Table with Coaxial Cable
  • CO, Interleave, Asym, 8dB
  • 200M -> 54Mbps/184Mbps
    400M -> 49Mbps/148Mbps
    600M -> 36Mbps/100Mbps
    800M -> 21Mbps/50Mbps
    1000M -> 7Mbps/42Mbps
    1200M -> 5Mbps/27Mbps
  •  
  • CO, Interleave, Sym, 8dB
  • 200M -> 131Mbps/148Mbps
    400M -> 93Mbps/118Mbps
    600M -> 77Mbps/66Mbps
    800M -> 44Mbps/30Mbps
    1000M -> 20Mbps/25Mbps
    1200M -> 13Mbps/27Mbps
  •  
  • G.INP, ASym, 8dB
  • 200M -> 89Mbps/185Mbps
    400M -> 57Mbps/155Mbps
    600M -> 33Mbps/75Mbps
    800M -> 17Mbps/66Mbps
    1000M -> 13Mbps/59Mbps
    1200M -> 4Mbps/32Mbps
  •  
  • G.INP, sym, 8dB
  • 200M -> 140Mbps/144Mbps
    400M -> 104Mbps/113Mbps
    600M -> 62Mbps/73Mbps
    800M -> 40Mbps/29Mbps
    1000M -> 20Mbps/27Mbps
    1200M -> 14Mbps/20Mbps
  •  
  • CO, Interleave, Asym, 12dB
  • 200M -> 75Mbps/169Mbps
    400M -> 54Mbps/128Mbps
    600M -> 26Mbps/80Mbps
    800M -> 17Mbps/39Mbps
    1000M -> 5Mbps/29Mbps
    1200M -> 3Mbps/28Mbps
  •  
  • CO, Interleave, Sym, 12dB
  • 200M -> 125Mbps/128Mbps
    400M -> 89Mbps/99Mbps
    600M -> 64Mbps/53Mbps
    800M -> 37Mbps/26Mbps
    1000M -> 19Mbps/28Mbps
    1200M -> 15Mbps/20Mbps
  •  
  • G.INP, Asym, 12dB
  • 200M -> 79Mbps/166Mbps
    400M -> 47Mbps/137Mbps
    600M -> 31Mbps/73Mbps
    800M -> 13Mbps/45Mbps
    1000M -> 6Mbps/38Mbps
    1200M -> 3Mbps/22Mbps
  •  
  • G.INP, Sym, 12dB
  • 200M -> 117Mbps/123Mbps
    400M -> 89Mbps/96Mbps
    600M -> 52Mbps/43Mbps
    800M -> 39Mbps/24Mbps
    1000M -> 15Mbps/26Mbps
    1200M -> 12Mbps/20Mbps
Switch Specifications
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Flow Control Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Jumbo Packet Size 9K bytes
System Specifications
VDSL Compliance VDSL-DMT
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
ITU-T G.993.5 G. Vectoring
ITU-T G.998
G.INP
ADSL Compliance Capable of ADSL2/2+ standard
ITU G.992.3 G.dmt.bis
ITU G.992.5 G.dmt.bisplus
Data Rate: Up to 24Mbps
Standards Conformance
Standards Compliance IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
ITU-T G.993.5 G.Vectoring and G.INP
ITU-T G.998
Regulatory Compliance FCC Part 15 Class A, CE
Environment
Temperature Operating: -40~75 degrees C
Storage: -40~75 degrees C
Humidity Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)
MODEL NUMBER DESCRIPTION
2178HSEE-C-G.V-GB Planet Industrial 1-Port BNC/RJ11 to 4-Port Gigabit Ethernet Extender