Loading...

DataConnect 2178HEE Industrial 10/100BASE-TX Ethernet Extender – 2pack

SKU: 384 Category:

$916.00

Description

DataConnect 2178HEE Industrial 10/100BASE-TX Ethernet Extender – 2pack                

  • Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
  • Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
  • Operates transparent to higher layer protocols such as TCP/IP
  • Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
  • Support DIP switch to select Local or Remote side
  • Ethernet Extender (RJ-11 and Terminal Block) Port: Symmetrical on the VDSL, High-speed Full-duplex up to 100Mbps communications link over existing copper telephone wire
  • Ten speeds with speed indicator LEDs on front panel of unit: A.Up to 50Mbps @ about 300meters (984ft.) B:1Mbps @ about 1,900meters (6,232ft.)
  • Redundant power inputs with Terminal Block and DC Jack
  • -40°C to 75°C (-40°F to 167°F) operating temperature range
  • Hardened aluminum case
  • Supports DIN-Rail , Panel, and Rack Mounting installation

 

          https://www.etherwan.com/images/cert/1.gif

The 2178HEE Series Ethernet Extender enables the extension of Ethernet connectivity over existing copper pair allowing legacy infrastructure to be leveraged for IP networks and extending the Ethernet distance limitations of 100 meters.

Upgrading an existing legacy control or surveillance system to a new IP-based system is a complicated task, especially when existing cable infrastructure is old copper or twisted pair cable. 2178HEE Series provides Ethernet connection and extension over these existing copper wire cables minimizing the expense of pulling new cable infrastructure.

The 2178HEE Series is built with industrial grade specifications, providing wide temperature operation range from -20°C to 60°C to overcome industrial environments. Incorporating VDSL technology, the 2178HEE’s RJ11 and terminal block extender ports provide long distance transmission with 50Mbps rate at 300 meters, or 1Mbps at 1900 meters; 10 speed LED indicators in the front panel provide easy lookup for the connection speed.

 

 

Dimensions

 

 

Application Diagram

 

 

 

DataConnect 2178HEE Features 

 

Standards

IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3x

Protocols

Transparent to higher layer protocols

Processing Type

Half-duplex back-pressure and IEEE802.3x Full-duplex flow control

Input

Input Voltage: 12 to 30VDC (Terminal Block); 12VDC (DC Jack)

Power Consumption

4.2W Max. 0.35A @ 12VDC, 0.175A @ 24VDC

Overload Current Protection

Present

Reverse Polarity Protection

Present

Casing

Aluminum case
IP30

Dimensions

50mm (W) x 110mm (D) x 135mm (H)
(1.97" (W) x 4.33" (D) x 5.31" (H))

Weight

0.8Kg (1.76lbs.)

Installation

DIN-Rail (Top hat type 35mm), Panel, Rack Mounting

Ethernet Port

Port: One RJ-45 port, 10/100BASE-TX Full/Half-duple
Auto-Negotiation, Auto-MDI/MDIX
PoE Port: complies with IEEE802.3af and IEEE802.3at standard
Speed: 10/100Mbps
Distance: 100meters (328ft.)
Cable: 10BASE-T: UTP CAT. 3, 4, 5 (2-pair wire)
100BASE-TX: UTP CAT. 5 (4-pair wire)

Ethernet Extender Port

Port: One RJ-11 and Terminal Block port
Speed: 1/3/5/10/15/20/25/30/40/50Mbps
Distance: 1900meters (6,232ft.)
Cable: Telephone wire 24 AWG (0.5mm diameter, 1-pair wire) or larger

DIP switch

One DIP Switch: Local (CO) or Remote (CPE)

LED Indicators

Per Unit: Power Status (Power)
Per Port: 10/100TX: Link/Activity, Full-duplex
Line: Error, Link, Local, Remote

LED Indicators

LED Speed Distance
1 Green 1Mbps 1,900m(6,232ft.)
Amber 3Mbps 1,800m(5,904ft.)
2 Green 5Mbps 1,600m(5,294ft.)
Amber 10Mbps 1,400m(4,593ft.)
3 Green 15Mbps 1,200m(3,936ft.)
Amber 20Mbps 1,000m(3,280ft.)
4 Green 25Mbps 800m(2,624ft.)
Amber 30Mbps 700m(2,296ft.)
5 Green 40Mbps 600m(1,968ft.)
Amber 50Mbps 300m(984ft.)

NOTE:
All speed selections are Symmetrical on the DSL.

Environment Operating
Temperature

-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)

Storage Temperature
-40°C to 85°C (-40°F to 185°F)

Ambient Relative Humidity

5% to 95% (non-condensing)

Regulatory Approvals
ISO

Manufactured in an ISO9001 facility

Safety

UL508
ISA 12.12.01, Class I, Division 2 Classified for use in hazardous locations

EMI
FCC Part 15, Class A
EN61000-6-3
– EN55022
– EN61000-3-2
– EN61000-3-3

EMS

EN61000-6-2
– EN61000-4-2 (ESD Standards)
Contact: + / – 4KV
Air: + / – 8KV
– EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 1000MHz; 80% AM
– EN61000-4-4 (Burst Standards)
Signal Ports: + / – 4KV
D.C. Power Ports: + / – 4KV
– EN61000-4-5 (Surge Standards)
Signal Ports: + / – 1KV; Line-to-Line
D.C. Power Ports: + / – 0.5KV; Line-to-earth
– EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15 – 80MHz; 80% AM
D.C. Power Ports: 10Vrms @ 0.15 – 80MHz; 80% AM
– EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz

Environmental Test Compliance

IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10 – 150Hz, Amplitude 0.35mm (Operation/Storage/Transport)

IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)

FED STD 101C Method 5007.1 (Free fall w/ package)
-Tested with Cross Weight and Drop High standard table

Additional information

Weight 5.00 lbs
Dimensions 12.00 × 12.00 × 12.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

DataConnect 2178HEE Features

Standards IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3xProtocols Transparent to higher layer protocolsProcessing TypeHalf-duplex back-pressure and IEEE802.3x Full-duplex flow controlInput Input Voltage: 12 to 30VDC (Terminal Block); 12VDC (DC Jack)Power Consumption4.2W Max. 0.35A @ 12VDC, 0.175A @ 24VDCOverload Current Protection PresentReverse Polarity ProtectionPresentCasing Aluminum case
IP30Dimensions 50mm (W) x 110mm (D) x 135mm (H)
(1.97" (W) x 4.33" (D) x 5.31" (H))Weight0.8Kg (1.76lbs.)Installation DIN-Rail (Top hat type 35mm), Panel, Rack MountingEthernet Port Port: One RJ-45 port, 10/100BASE-TX Full/Half-duple
Auto-Negotiation, Auto-MDI/MDIX
PoE Port: complies with IEEE802.3af and IEEE802.3at standard
Speed: 10/100Mbps
Distance: 100meters (328ft.)
Cable: 10BASE-T: UTP CAT. 3, 4, 5 (2-pair wire)
100BASE-TX: UTP CAT. 5 (4-pair wire)Ethernet Extender PortPort: One RJ-11 and Terminal Block port
Speed: 1/3/5/10/15/20/25/30/40/50Mbps
Distance: 1900meters (6,232ft.)
Cable: Telephone wire 24 AWG (0.5mm diameter, 1-pair wire) or largerDIP switch One DIP Switch: Local (CO) or Remote (CPE)LED Indicators Per Unit: Power Status (Power)
Per Port: 10/100TX: Link/Activity, Full-duplex
Line: Error, Link, Local, RemoteLED Indicators LED Speed Distance
1 Green 1Mbps 1,900m(6,232ft.)
Amber 3Mbps 1,800m(5,904ft.)
2 Green 5Mbps 1,600m(5,294ft.)
Amber 10Mbps 1,400m(4,593ft.)
3 Green 15Mbps 1,200m(3,936ft.)
Amber 20Mbps 1,000m(3,280ft.)
4 Green 25Mbps 800m(2,624ft.)
Amber 30Mbps 700m(2,296ft.)
5 Green 40Mbps 600m(1,968ft.)
Amber 50Mbps 300m(984ft.)NOTE:
All speed selections are Symmetrical on the DSL.Environment Operating
Temperature-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)Storage Temperature
-40°C to 85°C (-40°F to 185°F)Ambient Relative Humidity5% to 95% (non-condensing)Regulatory Approvals
ISO Manufactured in an ISO9001 facilitySafety UL508
ISA 12.12.01, Class I, Division 2 Classified for use in hazardous locationsEMI
FCC Part 15, Class A
EN61000-6-3
– EN55022
– EN61000-3-2
– EN61000-3-3EMS EN61000-6-2
– EN61000-4-2 (ESD Standards)
Contact: + / – 4KV
Air: + / – 8KV
– EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 1000MHz; 80% AM
– EN61000-4-4 (Burst Standards)
Signal Ports: + / – 4KV
D.C. Power Ports: + / – 4KV
– EN61000-4-5 (Surge Standards)
Signal Ports: + / – 1KV; Line-to-Line
D.C. Power Ports: + / – 0.5KV; Line-to-earth
– EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15 – 80MHz; 80% AM
D.C. Power Ports: 10Vrms @ 0.15 – 80MHz; 80% AM
– EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60HzEnvironmental Test ComplianceIEC60068-2-6 Fc (Vibration Resistance)
5g @ 10 – 150Hz, Amplitude 0.35mm (Operation/Storage/Transport)IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)FED STD 101C Method 5007.1 (Free fall w/ package)
-Tested with Cross Weight and Drop High standard table