Loading...

Patton CopperLink 2110 Ethernet Booster

SKU: 1667 Category:

$121.00$224.01

Description

Overview

The CopperLink™ Model 2110 doubles Ethernet distance limitations of 328 feet (100 meters). Multiple Model 2110 Ethernet Boosters can be placed in-line to further extend both Ethernet and PoE up to 1,640 ft (500 m), eliminating the need for additional switches, hubs, wireless access points, and expensive fiber installations. The Model 2110 is completely transparent to protocol making them true plug-and-play devices, completely interoperable with any network enabled device. The Model 2110 will not cause latency or degradation on your network connections, ensuring the maximum 100-Mbps full-duplex line rate. The Model 2110P and 2110PSE not only transparently pass on Ethernet data, but also feed on and forward PoE power to devices such as wireless access points, IP cameras, and VoIP phones.

 

802.3af Power and Distance Chart

 

 
 
Power Delivered
13W
6.5W
3.84W
0W
Class of PoE Device
Class 3/0
Class 2
Class 1
No PoE Load
Model
PoE Source
Maximum Distance
 
 
 
2110/P
PoE switch
N/A
300 m

984 ft

400 m

1,310 ft

500 m

1,640 ft

2110/PSE

+ 2110/P

PoE Injector

2110/PSE/EUI

400 m

1,312 ft

500 m

1,640 ft

500 m

1,640 ft

800 m

2,625 ft

2110/EUI
No PoE
N/A
N/A
N/A
N/A
 
 

CopperLink™ Copper Ethernet Extenders

Take your network connections faster and farther over existing voice-grade wire with Patton CopperLink™ Ethernet Extenders!

 

# of

Ethernet Ports

# of wirepairs

Max. Speed (Mbps)

Distance at Max. Speed
CopperLink™

Model

2
 

CAT5+ (4)

N/A
 
2,625 ft/0.8km
(328ft/100m per 2110)
2110
 

2
 

1
 

100
 

500 ft/0.15km
 
2173
 

4
 

4
 

45.6
 

4,600 ft/1.4km
2162
 

4
 
2
 
22.8
 

4,600 ft/1.4km
2161
 

2
 
1
 
15
 

2,953 ft/0.9 km
 
2151
 

4
 

1
 

11.4
 

4,593 ft/1.4km
 
2160
 

2
 
1
 

10
 
4,265 ft/1.3km
 
2150
 

1
 
1
 

4.6
 
10,827 ft/3.3km
 
2157
 
1
1

2.3
16,404 ft/5.0km
2156

 

Applications

 

The CopperLInk Ethernet Booster is ideal for delivering Ethernet to remote network enabled devices located outside Ethernet’s limited range of 328 feet (100 meters). Several configurations are possible based on individual requirements.

Model 2110/P: PoE Pass Through & Ethernet Extension

 

 

Model 2110/P: PoE Pass Through & Ethernet Extension
 

 

Model 2110/PSE: PoE Injection & Ethernet Extension

 

Model 2110/PSE: PoE Injection & Ethernet Extension

 

Model 2110/EUI: Ethernet Extension

Model 2110/E: Ethernet Extension

Additional information

Weight 2.00 lbs
Dimensions 5.00 × 5.00 × 5.00 in
Model

2110-EUI, 2110-P, 2110-PSE-EUI, 2110-PSE-EUI-48

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Features

  • Ethernet & PoE Extension—Doubles 10/100Base-TX Ethernet and PoE to 200 meters (656 feet). Multiple units can be used in series for even longer extensions.
  • Operates over CAT5—Reduces the cost and hassles of adding switches, hubs, and wireless access points.
  • Plug and Play—No configuration or cable hassles during installation with auto-sensing 10/100, full or half duplex, and automatic MDI-X.
  • Transparent LAN Operation—Transparent operation ensures the highest rate possible for each extension distance.
  • No External Power Required—Power over Ethernet (PoE) capability enables both extenders and peripheral devices to be powered over standard twisted-pair Ethernet cable.
  • Made in the USA— This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.

SPECIFICATIONS

Ethernet Connection Two Ethernet ports 10/100Base-TX; 802.3af •Auto-Negotiating 10/100 •Supports Flow Control (IEEE803.X) for full duplex operation •Supports back pressure for half-duplex operation •Store and forward •Auto MDI-X •802.3af pass through
LED Status Indicators PoE/Power (Green): Glows solid when there is power to the unit •Ethernet (Green): Flashes when passing traffic
Power Rated Voltage: 12 VDC (/EUI) or 57 VDC (/PSE or /P) •Rated Current: 700 mA
Operating Temperature 32-122°F (0-50°C)
Operating Humidity Up to 90%, non-condensing
Dimensions 3.88L x 1.75W x 0.75H in. (9.8Lx 4.4W x 1.9H cm)
Weight 0.13 lbs (0.06 kg)

ORDERING INFORMATION

# Model # Description Availability
1 2110/EUI CopperLink 10/100 Mbps Ethernet Booster; 100-240 VAC General Availability
 
12-129 North American plug for interchangeable power supplies
12-130 European plug for interchangeable power supplies
12-131 United Kingdom plug for interchangeable power supplies
12-132 Australian plug for interchangeable power supplies
12-201 Korean plug for interchangeable power supplies
12-202 India/South Africa Type D plug for interchangeable power supplies
Additional Charge:
1001MP16 19" 16 SLOT MOUNTING PANEL
2 2110/P CopperLink 10/100 Mbps Ethernet Booster; 802.3af pass through General Availability
 
Additional Charge:
1001MP16 19" 16 SLOT MOUNTING PANEL
3 2110/PSE/EUI CopperLink 10/100 Mbps Ethernet Booster; 802.3af; Injector 54VDC Source General Availability
 
0805AUS Australia/New Zealand Power Cord (C)
0805EUR European Power Cord (IEC320 A)
0805IN India/South Africa Power Cord (G)
0805UK UK Power Cord (IEC320 D)
0805US US Power Cord (IEC320 K)
Additional Charge:
1001MP16 19" 16 SLOT MOUNTING PANEL
4 2110/PSE/EUI-48 CopperLink 10/100 Mbps Ethernet Booster and 802.3af PoE Injector; 48VDC Source Special Order
 
0805AUS Australia/New Zealand Power Cord (C)
0805EUR European Power Cord (IEC320 A)
0805IN India/South Africa Power Cord (G)
0805SW Switzerland Power Cord (L)
0805UK UK Power Cord (IEC320 D)
0805US US Power Cord (IEC320 K)
Additional Charge:
1001MP16 19" 16 SLOT MOUNTING PANEL
5 080511-07M 2110/PSE REPLACEMENT POWER SUPPLY AC/DC,UNIV IN,48VOUT,625MA,DSKTOP,2.5MM