Description
The BLACK BOX MT1510A-35 T1/FT1 CSU/DSUs provide high-speed T1 format processing at speeds from 56 kbps to 1.544 Mbps for V.35 or RS-530 segments in your network. The BLACK BOX MT1510A-35 not only gives you the framing and formatting of V.35 data for transmission across predefined T1 facilities, the BLACK BOX MT1510A-35 also works with both full and fractional T1 services. All models feature a V.35 (M/34) data port for delivering T1/FT1 services to the data terminal equipment (DTE) of your end users.
Whether you need to connect router traffic, plug the BLACK BOX MT1510A-35 directly into a mux’s V.35 interface, bridge networks, or provide video over T1/FT1 lines, our BLACK BOX MT1510A-35 T1/FT1 CSU/DSUs deliver. You can also use the BLACK BOX MT1510A-35 to terminate a public Frame Relay link for voice, fax, and data. Even though the BLACK BOX MT1510A-35 CSU/DSUs support a maximum full-duplex data rate of 1.544 Mbps across the T1/FT1 line, you can set specific speed in 56K (or 64-kbps) increments below that.
The BLACK BOX MT1510A-35 T1/FT1 CSU/DSUs go the distance, too! Use the BLACK BOX MT1510A-35 in pairs as line drivers for your point-to-point applications to reliably and economically link two V.35 (or RS-530) devices up to 6000 feet (1828.8 m) apart. The BLACK BOX MT1510A-35 CSU/DSUs support AMI/B8ZS line coding and D4/ESF framing on the T1/FT1 line, as well as network interface or internal oscillator clocking. You can control functions with the BLACK BOX MT1510A-35 front-panel dome switches. Plus, you can manage the BLACK BOX MT1510A-35 via its standard RS-232 port for local or remote maintenance, monitoring the unit’s ports and network connection. The BLACK BOX MT1510A-35 critical alarm info displays with date and time stamps.
What’s more, a simple menu structure enables you to easily set up the BLACK BOX MT1510A-35 and perform diagnostic testing from any VT100™ compatible device through the BLACK BOX MT1510A-35 serial console port connection. For troubleshooting, you can also run local and remote loopbacks on both the serial and V.35 network segments and generate test patterns.
Four models of the T1/FT1 CSU/DSU are available. In addition to our basic V.35 model (MT1500A), we offer three SNMP-manageable models (MT1510A-35, MT1511A, and MT1510A-530), which come with an SNMP agent for setting up real-time alarms and advanced management functions. SNMP MIB II compliance means they’re compatible with popular network management systems like HP® OpenView® or SNMPc™. The managed model with DSX (MT1511A) also has a DSX “drop-and-insert” port that enables you to configure your T1 line to share bandwidth capacity for multiplexing a mixture of both voice and data traffic.
Reviews
There are no reviews yet.