Loading...

24-PORT VDSL DSLAM BUNDLE WITH A 24-PACK OF VDSL2 & 1-PORT ETHERNET 802.11 BRIDGE MODEM KIT

SKU: 939 Category:

$4,159.25

Description

24-PORT VDSL DSLAM BUNDLE WITH A 24-PACK OF VDSL2 & 1-PORT ETHERNET 802.11 BRIDGE MODEM KIT

5201V-BM

100/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution 
The DCE 5201V-BM is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The DCE/5201V-BM supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 4,593 Feet (1.4km) long range connections.
Implement with Existing Telephone Copper Wires 
The DCE 5201V-BM is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from the package of a 5201V-BM, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the DCE/5201V-BM with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The DCE 5201V-BM is ideal to be used as an Ethernet extender to an existing Ethernet network.
Delivers High-Demand Service Connectivity for ISP / Triple Play Devices
The DCE 5201V-BM provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the 5201V-BM enables many Multi-Media services to work on local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on.
Easy & Flexible Installation 
The Ethernet-over-VDSL2 Converter is plug-and-play design and fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The DCE 5201V-BM offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode DCE 5201V-BM and a CO mode 5201V-BM must be setup as one pair of converters to perform the connection.
Provides Superior Upstream and Downstream Transmission Performance
The DCE/5201V-BM also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the DCE 5201V-BM is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the DCE/5201V-BM is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance.
Example Applications 
Ethernet Distance Extension 
A pair of DCE 5201V-BM in a Point-to-Point application is perfect for an Ethernet distance extender extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with a maximum data rate of 100/100Mbps. With the included splitter, the telephone service can still be used while the 5201V-BM CO/CPE is in operation. The solution applications displayed below are typical applications for the DCE 5201V-BM high speed VDSL2 Bridge Modem.
MTU / MDU / Hospitality Solution
The DCE 5201V-BMis a perfect solution to quickly provide cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided.
Last Mile of FTTx Deployment
The DCE 5201V-BM is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of 5201V-BM can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house could use the existing phone line to transmit data through the Internet and the whole building could share the Internet to the wider area network with minimum cost.

Key Features 

  • Cost-Effective VDSL2 Profile 17a/30a CO / CPE bridge solution
  • One box design, CO / CPE selectable via DIP Switch
  • Defines symmetric band plan for the transmission of upstream and downstream signals
  • Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX and IEEE 802.3x, Flow control Ethernet standards
  • DMT (Discrete Multi-Tone) line coding
  • Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
  • One RJ-11 connector for VDSL port with VDSL connection, additional Splitter for POST connection
  • Voice and data communication can be shared simultaneously based on the existing telephone wire
  • One 10/100Mbps RJ-45 port, Auto-Negotiation and Auto-MDI/MDI-X
  • Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent
  • VDSL2 stand-alone transceiver for simple bridge modem application
  • Advantage of minimum installation time (Simply as Plug-and-Play)
  • Selectable target profile and target SNR margin
  • Supports extensive LED indicators for network diagnosis
  • Compact in size, easy installation

5224AV-DSG

Perfectly Designed for FTTx Last Mile Applications DCE 5224AV-DSG is a telecom-level, high-performance IP-DSLAM (Digital Subscriber Line Access Multiplexer) with 24-port VDSL2 / ADSL2+ and 2-port Gigabit TP / SFP combo interfaces, and AC plus DC Redundant Power System. The 5224AV-DSG is fully compliant with ITU-T G.993.2 VDSL2 standard band plan up to profile 30a. It offers maximum download and upload line rate up to 100/100Mbps on the existing twisted pair lines. For ADSL connectivity, the 5224AV-DSG supports high interoperability and backward compatibility with ATU-R, and ADSL2 / ADSL2+ line mode. It is an ideal CO solution for FTTx last mile applications of broadband access by ISPs and Telecoms.

Delivering High-demand Service Connectivity for ISP/Triple Play Devices
The 5224AV-DSG provides excellent bandwidth to meet the requirement of the triple play devices for home entertainment and communications. With the capability of 100/100Mbps symmetric data transmission, the 5224AV-DSG enables many multi-media services to work on the Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on.

ADSL2+ Fallback
For those ISPs that still provide ADSL broadband service, the 5224AV-DSG supports transmission rates up to24Mbps downstream and 3.5Mbps upstream with ADSL 2+ technology. The 5224AV-DSG supports PPPoE relay to establish connection with ISP, and it is switched over to VDSL2 after the network upgrade.

Comprehensive and Advanced VDSL2/ADSL2+ Configuration
For the bandwidth and distance of broadband access, the 5224AV-DSG IP-DSLAM supports multiple selective VDSL2 profiles (8a, 8b, 8c, 8d, 12a, 12b, 17a and 30a), 997/998 band plan and ADSL/ADSL2/ADSL2+ ITU-T G.993.1, ITU-T G.992.3, ITU-T G.992.5, Annex A/B/L/M transmit modes to each subscriber line. Furthermore, it can be configured on a per-link basis for transmission mode, rate limitation, INP (impulse noise protection) and SNR (signal-to-noise) margin. These advanced xDSL functionalities help service providers to adjust the line performance and build a stable and reliable IP-DSLAM solution.

Extremely-reliable Design to Ensure Continuous Operation
The 5224AV-DSG supports the SELT (Single-end Loop Testing) and dual power inputs system for continuous network operation. SELT simplifies the testing of a DSL loop from one end to the line to be completed easily from the central office (CO) without having to require a technician or any equipment to be employed at the subscriber site. SELT makes line maintenance easily and reduces device shutdown time. The 5224AV-DSG is also equipped with one 90~240V AC unit and one DC -48V power supply unit for power redundancy. The Redundant Power System offers more reliability and reduces the possibility of device shutdown. The -48V DC power supply implemented makes the 5224AV-DSG IP-DSLAM as a telecom level device that can be located at the electronic room.

High-speed Broadband Communications for Home Triple Play Application
Nowadays, higher speed home broadband connections are in great demand, but most of the last mile solutions in the market are not easily to be deployed or cost very much. The 5224AV-DSG will be the perfect solution to the last mile deployment for ISP and Telecom service providers as it applies the EoVDSL (Ethernet over VDSL) to providing up to 100Mbps speed transmission capability with the current telephone wire (RJ11), and thus it does not cost too much for re-wiring and can make many multi-media services come true. The 5224AV-DSG not only gives the excellent bandwidth for the triple-play home entertainment and communications, but also supports ADSL2 / ADSL2+ technology for users to conveniently utilize the current ADSL / ADSL2+ device.

VDSL2 in Hotel Deployment
The 5224AV-DSG can support the ISP and Telecom service providers in long-distance network deployment. By Ethernet standard, the length of cable can only reach up to 100 meters, and thus, the Ethernet network cannot meet the requirement when the deployment needs a longer cable. To solve this issue, the 5224AV-DSG complies with the VDSL2 / ADSL2+ standard where up to 1.4km in cable length through existing phone wires can be supported. Thus, in the Hotel network, for example, the IPTV, Internet and wireless facilities can be installed in each room even though the central office or control room is over 100 meters away.

DCE 5224AV-DSG FEATURES 

DSL INTERFACES

  • 24 full-duplex VDSL2 / ADSL2+ links via RJ21 (Telco-50) connector
  • 24 corresponding POTS lines via RJ21 (Telco-50) connector
  • Built-in POTS splitter for each VDSL / ADSL port
  • Compatible with PLANET’s VDSL2 CPE devices: VC-231, VC-234, VDR-300NU
  • Compatible with PLANET’s ADSL2/2+ router: ADN-4101, ADE-3400, ADE-3410, ADE-4400, VDR-300NU
  • Auto-speed function for DSL link (by distance and cable quality)

ETHERNET INTERFACES

  • 2 10/100/1000Mbps TP and 2 1000Mbps SFP
    shared combo interfaces
  • 1 alarm in and 1 alarm out copper ports
  • Auto-MDI/MDI-X detection on Gigabit RJ-45 port

VDSL2 FEATURES

  • Cost-effective VDSL2 link and central
    management solution
  • Compliant with ITU-T G.993.2 VDSL2 standard
    (8a,8b,8c,8d,12a,12b,17a and 30a Profiles)
  • Configurable xDSL line profile and alarm profile
  • DMT (discrete multi-tone) line coding VDSL
  • Up to profile 30a 100/100Mbps symmetric data
    rate for VDSL2vSelectable target data rate and
    target SNR margin
  • Built-in surge protection against surge damage
    from high energy spike
  • Voice and data communication can be shared
    on the existing telephone wire simultaneously
  • Supports downstream / upstream rate control
    on each port

ADSL2/2+ FEATURES

  • Compliant with ADSL2/2+ standard
  • ITU-T G.992.1 Annex A/B- ITU-T G.992.3 Annex A/B,
    Annex L mode1 and mode2- ITU-T G.992.5 Annex A/B/M
  • Configurable xDSL line profile and alarm profile
  • Supports upstream 3.5Mbps and downstream
    24Mbps at the maximum
  • Supports PPPoE relay

LAYER 2 FEATURES

  • Destination Lookup Fail (DLF) / Broadcast Rate Limit
  • Q-in-Q VLAN
  • Supports Redundancy / Static Link Aggregation / Daisy
    Chain uplink application mode
  • 8 queues priority for SP-priority and WRR-weight QoS
  • ToS to VLAN priority remark mapping

QUALITY OF SERVICE

  • 8 queues priority for all xDSL ports
  • SP-priority / WRR-weight QoS
  • ToS to VLAN priority remark mapping

MULTICAST

  • IGMP v2
  • IGMP Fast Leave

SECURITY

  • 8 groups Layer2/3/4 Access Control List
  • DHCP Option82

MANAGEMENT

  • System date and time control
  • Single-end loop testing
  • Lamp test
  • User management account
  • Out-band management
  • Remote management control
  • SNMP trap

POWER SYSTEM

  • 90~240V AC and -48V DC dual power input interfaces
  • Supports power redundancy

 

Additional information

Weight 5.00 lbs
Dimensions 12.00 × 12.00 × 12.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.