CALL US :1 (888)-4WAN-LAN

FiberPlex Audio Line Level 2Ch Plus Doorbell In FOI-2981 | FOI-4982 | FOI-2983[FOI-2981 | FOI-4982 | FOI-2983]

FiberPlex Audio Line Level 2Ch Plus Doorbell In FOI-2981 | FOI-4982 | FOI-2983[FOI-2981 | FOI-4982 | FOI-2983]

Select Model or Contact Us for more information.

Model:

FOI-2981-ST ---- ($459.00)
FOI-2983-ST ---- ($986.85)
FOI-4982-ST ---- ($388.45)
Quantity :

Overview

The FOI-2981, FOI-4982, and FOI-2983 all provide complete electrical isolation for audio communications. A typical link consists of either an FOI-2981 or an FOI-2983 at one end of the network transmitting optical signals to an FOI-4982 at the other end of the network with a single fiber optic cable.

Typical Application

  • Input A: voice announcements
  • Input B: background music
  • Input C: dry contact for doorbell (must be supplied by customer) A doorbell buzzer is generated when this input is grounded.

Order of Precedence

  • A (highest – overides B and C)
  • C (overides B)
  • B (lowest)

The unit can be used in areas of high electrical noise or in and out of RF shielded enclosures. The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. Privacy of communications is also enhanced because the fiber optic cable does not radiate any emissions. In addition, fiber optic cable offers much longer transmission distances than copper wiring. Multimode optics on the units can extend the distance to 2km.

Flexible Mounting and Powering Options

The FOI-2981, FOI-4982 and FOI-2983 are part of the FOI line of products designed for ruggedized mil applications. They are housed in the familiar FOI shielded can enclosure. For standalone applications the FOI-2981 and FOI-2983 can be powered by adding a PSQ-2909 AC supply or a PSQ-2920 DC power supply (not included) and the FOI-4982 can be powered with a PSQ-4909 AC supply or a PSQ-4920 DC supply. Optionally, up to 8 FOI units can be mounted on CMA chassis adapters and installed in an RMC-3101 or RMC-2101 rack mount chassis. The units are powered redundantly by a common back plane connection.

Features

 

FOI-2981:Optical Transmitter

  • 2 Audio Inputs
  • 1 Doorbell Input

FOI-2982:Optical Receiver

  • 2 Audio Outputs (8 Ohm and 600 Ohm)

FOI-2983:Optical Transmitter

  • 2 Audio Inputs
  • 1 Doorbell Input

(1 Audio Input Used for 70V Distribution Systems)

Specifications

ELECTRICAL SPECIFICATIONS - FOI-2981
Power Requirement 9 VDC @ 275 mA
Frequency Response 100 Hz - 8 kHz ± 3 dB
Input Level for A and B
Minimum
Maximum
50 mV RMS Adjust
Doorbell Operation for C A doorbell buzzer is generated when this input is grounded.
Priority Scheme A (highest - overides B and C) C (overides B) B (lowest)
Interface Connector A, B and C RCA Type Phono Jack
ELECTRICAL SPECIFICATIONS - FOI-4982
Power Requirements 9 VDC @ 275 mA
AUDIO OUTPUT 8 OHM Interface Connector 2-Conductor 1/4” Enclosed Telephone Jack (Balanced Output)
AUDIO OUTPUT 600 OHM Interface Connector RCA Type Phono Jack
ELECTRICAL SPECIFICATIONS - FOI-2983
Power Requirement 9 VDC @ 275 mA
Frequency Response 100 Hz - 8 kHz ± 3 dB
Input Level for A 70 V line transformer, 50mW, 100 kO
Input Level for B
Minimum
Maximum
50 mV RMS Adjust
Doorbell Operation for C A doorbell buzzer is generated when this input is grounded.
Priority Scheme A (highest - overides B and C) C (overides B) B (lowest)
Interface Connector A 3-Conductor 1/4” Enclosed Telephone Jack
Interface Connector B and C RCA Type Phono Jack
PHYSICAL SPECIFICATIONS - All
Case
Length
Width
Height
Weight
FOI-2981 & FOI-2983 Size 2
4.5 in (114 mm)
1.312 in (33 mm)
2.562 in (65 mm)
2 lb (0.9 kg)
FOI-4982 Size 4
4.5 in (114 mm)
1.453 in (37 mm)
2.562 in (65 mm)
2 lb (0.9 kg)
OPTICAL CHARACTERISTICS - All
Fiber
Size
Max Distance
Wavelength
Output Power
Multimode
62.5/125
2 km
820 nm
-18 dBm

Ordering Information

 

oi_FOI-2981
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search