Loading...

Enable-IT 3600R 8 Port 488W – 56V DC Rackmount PoE Injector

SKU: 1559 Category:

$0.00

Description

The EnableIT™ 3400R 8 Port 1600W – 48V DC Rackmount PoE Injector is a IEEE 802.3AF certified Midspan solution that is a easy to install and delivers up to 200W @48V DC 8.2A per port. This makes it ideal for installing any PoE enabled WiFi Wireless Access Point, Security camera or other PoE powered equipment up to 4,500ft / 1,371m when used with a Enable-IT PoE Ethernet Extender like the 865 PRO or rackmount Multi-port 8955 PoE Extender DSLAM. It eliminates the need for your installers adding power supply outlets and associated AC power cabling, providing a rackmount, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.

 

The 2U rackmount unit has 8 dedicated DC output screw terminals and comes with 8 18in spade or o-ring connected cabling into a secure locking connector suited for the Enable-IT 8955 Extended PoE DSLAM. You can order the 3400R with 8 RJ-45 PoE pinned male heads vs the secure connectors if you prefer to use our PoE Extenders like the 828 Gigabit or 865 PRO Gigabit PoE Extenders. The unit uses a single (120V ~ 240V) IEC 320 C14 standard Country specific power cord input with a 20A manual reset circuit breaker and Lighted AC Rocker ON/Off Switch in a ventilated rugged enclosure.

Keep in mind that all DC including (PoE) voltage drops over distance and thinker gauge wire will help this issue. As a rule of thumb you will lose 6V per every 200 feet of wiring, depending on the gauge. For example in Category 5 or 6 24 AWG there is less wire/copper to conduct electricity which is lower power throughput. Lower power throughput increases the amperage and that generates more heat in the wire. Depending on distance, you may need to use 18 gauge wiring as a dedicated DC power buss – like low voltage landscape wire and run Ethernet on a 1-pair 24 AWG. There are options to maximize your distance and PoE output when used in conjunction with our PoE Extenders or PoE DSLAM.

 

Additional information

Weight 5.00 lbs
Dimensions 5.00 × 5.00 × 5.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

  • 488W – 56V DC Rackmount PoE Injector 802.3AT certified
  • 8 dedicated ports – 61W @56V DC 2A per port
  • Saves thousands in electrical and engineering costs.
  • Clean 2U 19in Rackmount ventilated enclosure.
  • Single AC input with 20A manual reset circuit breaker
  • Lighted AC Rocker ON/Off Switch
  • Immunity ESD: EN61000-4-2 level.
  • Immunity RS : EN61000-4-3 level.
  • Immunity CS : EN61000-4-6 level.

Power

  • AC Input: 120V ~ 240V AC into a IEC 320 C14 socket with 20A Circuit breaker – manual reset
  • DC Output: (8) individual sets of dedicated 61W @ 56V DC Screw Terminals for PoE output.

Data Rate

  • Not Applicable – No Data input or output

Interface

  • AC Input: (1) IEC 320 C14 socket with 20A Circuit breaker – manual reset
  • DC Output: (8) Screw Terminals for PoE output.

Dimensions

  • -Front Panel Dimensions: Length 19.09in (485mm) x Height 3.46in (88mm) x Thick .07in (2mm)
  • -Enclosure Dimensions: Length 17.44in (443mm) x Width 11.81in (300mm) x Height 3.26in (83mm)

Environment

  • Operational Temperature: -4°F to 149°F (-20°to 65°C)
  • Humidity: 5% to 85%, non-condensing
  • Estimated 1,670 BTU/h output

Enclosure

  • Ruggedized black 2U rackmount aluminum ventilated casing.

 

ORDERING INFORMATION

 

Model # Description Availability
3600R Enable-IT 3600R 8 Port 488W – 56V DC Rackmount PoE Injector    Contact us for Availability