CALL US :1 (888)-4WAN-LAN

Enable-IT 360 61W - 56VDC Gigabit PoE+ Injector *[360]

Enable-IT 360 61W - 56VDC Gigabit PoE+ Injector *[360]

$79.00
Quantity :

The EnableIT™ 360 61W – 56V Gigabit PoE Injector (Power over Ethernet) is single port IEEE 802.3AF/AT compliant Midspan solution that is a compact and easy to install with RJ-45 Ethernet cabling. This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera or other PoE powered equipment. It eliminates the need for external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.

The 360 Gigabit PoE Injector is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3AF/AT compliant device, the Injector uses 4 wires in a category rated wiring bundle. i.e. CAT5e run required for Gigabit Ethernet.

The Enable-IT 360 is a 61W – 56V DC Gigabit PoE Injector supports both 2-pair and 4-pair PoE output and is ideal for installing high powered IP PoE devices up to 3,500ft when used in conjunction with an Enable-IT PoE Extender.
As will all PoE voltage drops over distance. As a rule of thumb you will lose 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring for best distance results.

  • 61W – 56VDC IEEE 802.3AT/AF Power Over Ethernet Midspan Injector.
  • FCC Part 15 Class B & EN55022 Class B.
  • DOE Level VI Efficiency – 56VDC @ 1.1A = 61 watts nominal at 86%
  • Rapid LAN style installation RJ45 jacks – no programming required.
  • Maintains existing RJ-45 Ethernet Data (10/100/1000mbps).
  • Supports VoD (Video on Demand) and MPEG IP channels.
  • Network Equipment independence – Transparent to protocols, applications and MAC addresses.
  • Cisco, Tango, Motorola and other Reverse Polarity compatible..
  • FCC Class B Part 15 and EN55022 (CISPR 22) Class B.
  • Immunity ESD: EN61000-4-2 level.
  • Immunity RS : EN61000-4-3 level.
  • Immunity CS : EN61000-4-6 level.

Power

  • AC Input (90 – 264VAC)
  • DC output 61W – 56V DC IEEE 802.3AT/AF Power Over Ethernet Midspan Injector.
  • Country Specific IEC 60320C13 Grounded power cord provided.
  • Built in Auto-Recovery, Over-Voltage and Short Circuit protection.

Data Rate

  • 1000Mbps full-duplex Ethernet Data

Interface

  • Ethernet: (1) LAN RJ-45 10/100/1000 Base-TX autosensing shielded socket for LAN Input
  • (1) LAN RJ-45 10/100/1000 Base-TX autosensing shielded socket for PoE output.

Dimensions

  • Height 1.57″ (40mm) Depth 4.72″ (120mm) Width 2.36″ (60mm)

Environment

  • Operational Temperature: -13°F to 176°F (-25°to 85°C)
  • Humidity: 5% to 95%, non-condensing

Enclosure

  • Ruggedized black aluminum casing with optional mounting brackets.
  • Link, speed, PoE active, PoE error, Data in Port LED

 

Model Name Description
360 Gigabit PoE Injector
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search