Loading...

FiberPlex 32×8 Digital Head VIS-4832

SKU: 1472 Category:

$3,102.50$3,438.25

Description

Overview

The VIS-4832 is normally used in connection with the VIM-1832 or VIM-MY32 YGDAI cards to achieve a 32×8 fiber-optic transport system. The VIS-4832 / VIM-1832 or VIM-MY32 system is normally used as a transport for STAGE to FOH with or without splits, using other manufacturers digital mic-pre’s input to the VIS-4832. This VIS-4832 / VIM-1832 system can also be used as a 32 channel drive snake.

This device contains 32 AES digital inputs and 8 analog OR 8 digital outputs (returns). There are word clock & super clock outputs presented on BNC connectors. The VIS-4832 is supplied with a pair of transmit/ receive LC fiber connectors (other connector types possible). 2 fiber optic splits are available as an option. These splits (transmit only) are presented on single LC connectors. The VIS-4832 will operate at 48k or 96k There are “sync” status LED’s on the front and rear panels of the unit. These LED’s will be solid green when in sync, flashing red and green while looking for sync, and solid red when no sync is present.

The “control” connection is a TTL data port which appears on an EtherCon® connector. It allows LightViper accessory devices such as the DMX4o (DMX lighting control) or MD3 (RS422/232/MIDI) to be connected to the unit. The EtherCon® output of the DMX4i or RJ45 on the MD-3 is input to the VIM-1832 via the “control” EtherCon® connector, combined with the audio input data, and transported via fiber to the VIS-4832. This data is then output from the “control” EtherCon® connector on the VIS-4832 and input into a DMXo or MD-3, where the TTL data is translated back into the original format. The VIS-4832 is convection cooled. AC power is via standard IEC connector. The unit can operate at any voltage 50-60Hz, 90-250v AC.

Additional information

Weight 5.00 lbs
Dimensions 5.00 × 5.00 × 5.00 in
Model

VIS-4832-E-LC, VIS-4832-E-O2, VIS-4832-E-ST, VIS-4832-S-LC, VIS-4832-S-O2, VIS-4832-S-ST

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Features

  • 32×8 FiberOptic Audio Transport
  • 32 AES3 Digital Inputs
  • 24 bit 48k or 96k operation
  • Optical distribution of Word Clock
  • Remote control of mic-pre’s
  • Ultra-low latency cable runs over 1.25 miles with no loss

Specifications

GENERAL SPECIFICATIONS
 
Min
Typ
Max
Power Requirement Voltage Range (V)
90
110
250
Supply Current (mA)
473
 
THD+N (1kHz@ +4dBu) < 0.01%
Frequency Response (20-20kHz @ +16 dBu) ± 0.5 dB
Dynamic Range 102 dB
Crosstalk 5 dB above noise floor
Sampling Rate 24 bit / 96kHz or 24 bit / 48 kHz
Latency 20 µs, digital input to digital output
 
Environmental Storage Temperature (°C)
-40
85
OperatingTemperature (°C)
0
50
INPUT CHARACTERISTICS
Digital In AES3 Digital
OUTPUT CHARACTERISTICS
 
Source Impedance
Nominal
Out Level
Max Before Clip
Connector
Analog Out
150 O
600 O Lines
+4 dBu (1.23 V)
+19 dBu (7 V)
DB25
Digital Out AES3 Digital DB25
PHYSICAL DIMENSIONS
Height
Width
Depth
Weight
1.75 in (45 mm)
19 in (483 mm)
6.5 (165 mm)
6 lb (2.7 kg)
OPTICAL CHARACTERISTICS
Fiber
Size
Max Distance
Wavelength
Output Power
RX Sens Loss Budget
Multimode
62.5 / 125 µm
2 km
820 nm
-18 dBm
-30 dBm
12 dB
Singlemode
9 /125 µm
20 km
1300 nm
-15 dBm
-32 dBm
21 dB

Ordering Information

 

oi_VIS-4832.png