Loading...

FiberPlex 8×32 Audio Distribution Tail VIM-1832 | VIM-1032

SKU: 1469 Category:

$2,791.40$3,710.25

Description

Overview

The VIM-1832 is used in connection with the VRK-1832 (analog) or VIS-4832 (digital) to achieve a 32×8 fiber-optic transport system. This VIM-1832 is normally the “tail” end for Stage to FOH or drive snake applications and the VIM-1032 serves as a split of the 32 incoming channels for the monitor location or other audio distribution points.

The LightViper® VIM-1832 and optional VIM-1032 combine with either a VRK-1832 (analog) or VIS-4832 (digital) to to create a powerful 32×8 audio distribution system. The VIM-1832 features 8 audio inputs which are selectable between analog line level and AES3 digital. The 32 audio outputs of both units are both analog line level and AES3 digital and are simultaneously available.

The VIM-1832 is the clock master in the system. I has the ability to generate it's own superiour quality Word Clock, or alternately accept an external Word Clock. There can be only one VIM-1832 in a given system. The VIM-1032 is a clock slave and reuires a VIM-1832 to operate. It has clock output for synchronizing external equipment and for distribution of clock.

Both the VIM-1832 and VIM-1032 feature a fiber pass through transmit connector which provides a freshly driven optical signal which can be daisy chained to additional VIM-1032 units for audio distribution applications.

The system features a “control” connection which is a TTL data port which appears on an EtherCon® connector. It allows LightViper accessory devices such as the DMX4o (DMX lighting control) or MD3 (RS422/232/MIDI) to be connected to the unit. 

Typical Application

1832_Application.jpg

Additional information

Weight 5.00 lbs
Dimensions 5.00 × 5.00 × 5.00 in
Model

VIM-1032-E-LC, VIM-1032-E-O2, VIM-1032-E-ST, VIM-1032-S-LC, VIM-1032-S-O2, VIM-1032-S-ST, VIM-1832-E-LC, VIM-1832-E-O2, VIM-1832-E-ST, VIM-1832-S-LC, VIM-1832-S-O2, VIM-1832-S-ST

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Features

  • 32×8 FiberOptic Audio Transport
  • 32 simultaneous analog & digital outputs
  • 24 bit 48k or 96k operation
  • Optical distribution of Word Clock
  • Lossless optical “THRU” for distributed systems
  • Ultra-low latency cable runs up to 20km with no loss

Specifications

GENERAL SPECIFICATIONS
 
Min
Typ
Max
Power Requirement Voltage Range (V)
90
110
250
Supply Current (mA)
463
 
THD+N (1kHz@ +4dBu) < 0.01%
Frequency Response (20-20kHz @ +16 dBu) ± 0.5 dB
Dynamic Range 102 dB
Crosstalk 5 dB above noise floor
Sampling Rate 24 bit / 96kHz or 24 bit / 48 kHz
Latency 630 µs analog input to analog output, 20 µs, digital input to digital output
 
Environmental Storage Temperature (°C)
-40
85
OperatingTemperature (°C)
0
50
INPUT CHARACTERISTICS
 
Voltage Gain
Sensitivity
S/N
Overload
Clipping
Impedance 
Analog In
0 (0dB)
1.65mVrms
-83dBu
+16dBu
+19dBu
2KO
Digital In AES3 Digital
OUTPUT CHARACTERISTICS
 
Source Impedance
Nominal
Out Level
Max Before Clip
Connector
Analog Out
150 O
600 O Lines
+4 dBu (1.23 V)
+19 dBu (7 V)
DB25
Digital Out AES3 Digital DB25
PHYSICAL DIMENSIONS
Height
Width
Depth
Weight
1.75 in (45 mm)
19 in (483 mm)
6.5 (165 mm)
6 lb (2.7 kg)
OPTICAL CHARACTERISTICS
Fiber
Size
Max Distance
Wavelength
Output Power
RX Sens Loss Budget
Multimode
62.5 / 125 µm
2 km
820 nm
-18 dBm
-30 dBm
12 dB
Singlemode
9 /125 µm
20 km
1300 nm
-15 dBm
-32 dBm
21 dB

Ordering Information