Loading...

FiberPlex T3 Fiber Converter FOI-DST3

SKU: 1432 Category:

$1,119.45$1,865.75

Description

Overview

The FOI-DST3 provides complete electrical isolation for T3 or DS3 communications.

Applications Include:

  • SONET Add/Drop Multiplexers (ADMs)
  • PDH Equipment
  • ATM WAN access routers and switches

The unit can be used in areas of high electrical noise or in and out of RF shielded enclosures. The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. Privacy of communications is also enhanced because the fiber optic cable does not radiate any emissions.

In addition, fiber optic cable offers much longer transmission distances than copper wiring. Traditional T3 coax cabling is limited to a maximum distance of 1100ft (335m), but multimode optics on the unit can extend the distance to 2km, while singlemode optics can further extend the distance to 20km. A typical link consists of two FOI-DST3, one at each end of the network, with a duplex fiber optic cable between them.

Flexible Mounting and Powering Options

The FOI-DST3 is part of the FOI line of products designed for ruggedized mil applications. It is housed in the familiar FOI shielded can enclosure. For standalone applications it can be powered by adding a PSQ-4909 AC supply or a PSQ-4920 DC power supply (not included). Optionally, up to 8 FOI units can be mounted on CMA chassis adapters and installed in an RMC-3101 or RMC-2101 rack mount chassis. The units are powered redundantly by a common back plane connection.

Additional information

Weight 5.00 lbs
Dimensions 5.00 × 5.00 × 5.00 in
Model

FOI-DST3-FC, FOI-DST3-R-FC, FOI-DST3-R-ST, FOI-DST3-RS-FC, FOI-DST3-RS-ST, FOI-DST3-S-FC, FOI-DST3-S-SC, FOI-DST3-S-ST, FOI-DST3-SC, FOI-DST3-ST

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Features

  • E3 communications
  • Satisfies K41 protection specifications for T3 systems.

Compliant with:

  • ANSI T1.102-1993
  • Telcordia GR-499-CORE
  • ITU-T G.775 for loss of signal

Specifications

ELECTRICAL SPECIFICATIONS
 
Min
Typ
Max
Power Requirement Voltage Range (V)
7
9
12
Supply Current (mA)
300
 
Data Rate 44.736 Mbps
Line Encoding AMI (Alternate Mark Inversion) / B3ZS (Binary 3 Zero Substitution)
 
Environmental Storage Temperature (°C)
-40
85
OperatingTemperature (°C)
0
50
 
Interface Connector BNC
PHYSICAL SPECIFICATIONS
 
Length
Width
Height
Weight
Case Dimensions Size 4
4.5 in (114 mm)
1.453 in (37 mm)
2.562 in (65 mm)
2 lb (0.9 kg)
OPTICAL CHARACTERISTICS
Fiber
Size
Max Distance
Wavelength
Output Power
RX Sens
Loss Budget
Multimode
62.5 / 125 µm
2 km (10Base) 300m (100Base)
820 nm
-18 dBm
-30 dBm
12 dB
Singlemode
9 /125 µm
20 km
1300 nm
-15 dBm
-32 dBm
dB

Ordering Information

 

oi_FOI-DST3.png