Loading...

DCE 5201V-BM High Speed VDSL2 Ethernet Extender

SKU: 319 Category:

$101.25

Description

DCE 5201V-BM High Speed VDSL2 Ethernet Extender / Bridge Modem (Profile 8a, 17a, 30a) with 2-Year Warranty

DCE 5201V-BM High Speed VDSL2 Bridge Modem
DCE 2178HSEE High Speed VDSL2 Bridge Modem

 

100/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution
The DCE 5201V-BM is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The DCE/5201V-BM supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 4,593 Feet (1.4km) long range connections.

Implement with Existing Telephone Copper Wires
The DCE 5201V-BM is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from the package of a 5201V-BM, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the DCE/5201V-BM with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The DCE 5201V-BM is ideal to be used as an Ethernet extender to an existing Ethernet network.

Delivers High-Demand Service Connectivity for ISP / Triple Play Devices
The DCE 5201V-BM provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the 5201V-BM enables many Multi-Media services to work on local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on.

Easy & Flexible Installation
The Ethernet-over-VDSL2 Converter is plug-and-play design and fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The DCE 5201V-BM offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode DCE 5201V-BM and a CO mode 5201V-BM must be setup as one pair of converters to perform the connection.

Provides Superior Upstream and Downstream Transmission Performance
The DCE/5201V-BM also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the DCE 5201V-BM is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the DCE/5201V-BM is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance.

Example Applications

Ethernet Distance Extension
A pair of DCE 5201V-BM in a Point-to-Point application is perfect for an Ethernet distance extender extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with a maximum data rate of 100/100Mbps. With the included splitter, the telephone service can still be used while the 5201V-BM CO/CPE is in operation. The solution applications displayed below are typical applications for the DCE 5201V-BM high speed VDSL2 Bridge Modem.
DCE 5201V-bm LAN to LAN Application
MTU / MDU / Hospitality Solution
The DCE 5201V-BMis a perfect solution to quickly provide cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided.
DCE 5201V-BM Multi LAN Application
Last Mile of FTTx Deployment
The DCE 5201V-BM is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers’ houses. The 10/100Mbps port of 5201V-BM can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house could use the existing phone line to transmit data through the Internet and the whole building could share the Internet to the wider area network with minimum cost.
DCE 5201V-BM Multi Dwelling Multi Tenant Applications

Additional information

Weight 1.00 lbs
Dimensions 12.00 × 12.00 × 12.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.