CALL US :1 (888)-4WAN-LAN

DATA CONNECT 48V-POEi-12PH 48 VOLTS POWER OVER ETHERNET INJECTOR 10/100 12 PORT HUB[48V-POEi-12PH]

DATA CONNECT 48V-POEi-12PH 48 VOLTS POWER OVER ETHERNET INJECTOR 10/100 12 PORT HUB

DATA CONNECT 48V-POEi-12PH 48 VOLTS POWER OVER ETHERNET INJECTOR 10/100 12 PORT HUB[48V-POEi-12PH]

$296.25
Quantity :
DATA CONNECT 48V-POEI=12PH
Qick and Easy PoE Network Deployment
The Data Connect DCE 48V POEI-12PH is 12-Port IEEE 802.3af Power over Ethernet Web Management injector Hub and complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3af standards. with 12 10/100Base-TX fast ethernet ports, DCE 48V POEI-12PH support full 48V DC power for any remote iee 802.4 af powered device (PD) like wireless LAN Access Point, IP phone, and IP camera. Supporting PoE power budget of 190 watts, DCE 48V POEI-12PH provides sufficient 15.4 watts PoE power to 12 remote PD devices.
Easy Cabling Installation
The DCE 48V POEI-12PH is installed between a regular Ethernet Switch and powered devices injection power without affecting the data transmission.they offer a cost effective and quick solution to upgrade network system to IEEE 802.3af Power over Ethernet system without replacing the existing Ethernet Switch. there are 24 RJ-45 STP ports on the front panel of the PoE Injector Hub, in which the 12 port on the lower stack funtion as "data input" and the other 12 port on the upper stack funtion as (PoE (Data and Power) output". Each of the "PoE output" port on the upper stack operates as a power injector which transmits DC voltage to the CAT 5 cable to transfer data and power simulaneously between the Injector and Splitter.
Friendly/Simple Web Managemment Interface
To Efficiently manage the powered devices DCE 48V POEI-12PH provides web management interface in which administrators can use the functions including port Enable / Disable, port priority, system configuration, and username . password changing and with smart features for powered device. the PoE injector hub can auto detect the power status of each port and show messages on its Web management interfaces. These features also provide a cost-effective way to manage the device via from internet whenever you are at work or home.
Application
PoE Injector Hub
For the places hard to find the power outlet, DCE 48V POEI-12PH provides the easiest way to power your Ethernet devices on the ceiling and wireless Access Point installed on the top of the building.
To control the power system of your network devices, DCE 48V POEI-12PH can directly co-working PoE IP phone to build VoIP telephony network in the office. Futhermore, the DCE 48V POEI-12PH can directly connected to any third party 802.3 compliant devices and PoE Switches installed 100 meters away.
FEATURES
Interface
• 24 port RJ-45 STP
-12-port “data Input”
-12 port “PoE (Data + Power) output”
• 1 10/100Base-TX Management port with auto MDI/MDI-X features
PoE
• Complies with IEEE 802.3af Power over Ethernet Mid-Span PSE
• Up to 12 IEEE 802.3af devices powered
• Support PoE power up to 12.4 watts for each PoE port
• Auto detect powered devices (PD)
• Circuit protection prevent power interfaces between ports
• Remote power Feeding Priority up to 100m
PoE Management
• Total PoE power budget control
• Pert port PoE function enable/disable
• PoE Port power feeding priority
• Per PoE power limit
PoE Management (cont.)
• PD classification detection
Management
• Web interface for remote management
• Firmware upgrade through web interface
• Smart discovery utility automatically finds DCE devices on the network
• SNMP Trap for alarm notification of events
Hardware
• 19”-inch rack mountable; 1U height
• Reset button fro reset to default setting and system reboot
• LED Indicators for PoE ready and PoE activity
Standard Compliance
• IEEE 802.3 10Base-T
• IEEE 802.3u 1000Base-TX
• IEEE 802.3af Power over Ethernet
• FCC Part 15 Class A, CE









SPECIFICATIONS
Model DCE 48V POEI-12PH
HARDWARE
Interface data Input Ports: 12 x RJ-45 STP “PoE (data +Power) “output ports 12x RJ-45 STP Management Port: 1 x RJ-45; 10/100Base –TX, auto-negotiation, auto-MDI/MDI-X
LEDs system: Power x 1 (green) Management Port x2: 10/100 (green/orange) per PoE Port: PoE in use x 1 (green)
Network Cable 10Base-T: 2-pair UTP Cat 3, 4, 5 up to 100m (328ft) 100Base-TX: 2-pair UTP Cat. 3, 4, 5 up to 100m (328ft)
EIA/TIA- 568 100-ohms STP (100m)
Dimensions (W x D x H) 440 x 200 x 44 mm (1U height)
Weight 2.7kg
Power Requirement 100-240V AC, 50/60 Hz
Power Consumption 200 watts max.
Operating Temperature 0 – 50 degrees C
Storage Temperature -40 – 70 degrees C
Humidity 5 – 95% (Non-Condensing)
Cooling Fan x 1
POWER OVER ETHERNET
PoE Standard IEEE 802.3af Power over Ethernet / Mid-Span PSE
PoE Power supply Type Mid-Span
PoE Power output Per Port DC 48V 15.4 Watts
Power Pin Assignment 4/5 (+), 7/8(-)
PoE Power Budget 190 Watts
MANAGEMENT
Management Interfaces Web, Smart Discovery Light
PoE Management Power limit by priority and total limit per port power enable/disable power feeding priority current usage and status total power a consumption
Management Feature system/ management function setup web firmware upgrade SNMP Trap for alarm notification of events
STANARDS CONFORMANCE
Standard Compliance IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3af Power over Ethernet
Regulation Compliance FCC Part 15 Class A, CE
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search