CALL US :1 (888)-4WAN-LAN



Quantity :


With global expansion of the Internet of Things (IoT), demand for IP/Ethernet-connected devices is soaring. Billions of devices are already capable of connecting to the Internet. Ethernet—and power-over-Ethernet (PoE) in particular—has grown in popularity because it strikes the perfect blend of speed, cost, and ease of use.

Ethernet, however, presents a few drawbacks that may overshadow the benefits by creating escalating infrastructure costs and system downtime. The Ethernet standard specifies a distance limitation of 328 ft (100 m), which restricts location options for device installation. Standard Ethernet also requires Cat 5 cabling or better, which often leads to installing new cabling infrastructure—involving tearing into walls, ceilings, pavement, and worse.

The CopperLink 1101 kit from Patton enables Ethernet connectivity over previously installed copper infrastructure. The solution breathes new life into circuits previously deployed for such traditional non-IP applications as RS232/485 controls, alarms, CCTV, analog phones, intercom speakers, and others.

Instantaneously install PoE-compliant devices such as wireless access points (WAPs), IP cameras, IP telephones, IP door stations, HVAC controls, and more—with no additional overhead cost. With the extended reach the CL1101 kit provides, you can install your IP terminal equipment exactly where you want it! Flexibility of device location is paramount in such applications as building security, where increased perimeter dimension and expanded spot coverage area are critical.


  • Ethernet Extension—Extends 10/100Base-TX Ethernet over 3300 feet (1005 meters)  using 2-wire, 24-AWG twisted-pair, Cat 3, Cat 5e/6/7, or coaxial cable.
  • ?Delivers PoE—?PowerPlus technology powers up both the remote CopperLink extender and the PoE enabled device connected to it. No power is required at the remote location.
  • Transparent LAN Bridging—?Passes higher layer protocols, including 802.1Q VLAN tagged and untagged packets. Fully transparent to various video compression schemes such as WMV, MPEG-4 and MJPEG.
  • ?Plug and Play—?Modems need no configuration to operate, Ethernet ports are auto-sensing 10/100, full or half-duplex.
  • Made in the USA—This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.


Extend Power and Ethernet to compliant or legacy PoE devices using already installed twisted-pair cable or coax



Line Interfaces (Data)
  • 1 x RJ45 (Optional: Terminal Block, Coax)
  • Supports 1-4 pairs
Ethernet Interfaces
  • 1 x RJ45 Auto-Sensing 10/100Base-TX with full or half-duplex operation
  • Power, Line, (10 or 100 operation), Eth, and PoE
  • Transparent to high layer protocol
  • Supports 802.1Q VLAN tagged frames
  • Transparent to IP video schemes
  • Fully transparent to compression schemes such as WMV, MPEG-4, and MJPEG
Power Injection (PSE only)
  • DC voltage on Ethernet port
  • 54 VDC
Power Consumption
  • 1.5 W
Power Supply
  • External AC Adapter 100–240 VAC to 54 VDC
  • Input: 30–57 VDC (Recommended 54 VDC)
  • 83,043 hours
  • Temperature: 0 to 50°C (standard)
  • Humidity: 10 to 95% (non-condensing)
  • 4.13 W x 1.5H x 3.15 D in. (105 W x 38.1 H x 95.3 D mm)
  • 0.78 oz (22 g)
  • FCC Part 15A, Class B
  • CE Mark
  • EMC Directive 89/336/EEC
  • LVD Directive 73/23/EEC
Power & data performance over twisted-pair wires
  10 Mbps   100 Mbps    
2 wire 4 wire 2 wire 4 wire 8 wire
Min. distance
feet (meters)






Max. distance
feet (meters)
Link time
Min. distance
5 sec 157 sec 5 sec 5 sec 5 sec
Link time
Max. distance
5–10 sec 8–265 sec 5 sec 6 sec 6 sec
PoE class at
Max. distance
Class 1 Class 2 Class 2/3 Class 4 Class 3/4



Model Name



     CopperLink PoE Extender Kit; 1x 10/100; 802.3af (mode A); RJ45 Line; Line Powered; AC Adapter 

Quick Find
Use keywords to find the product you are looking for.
Advanced Search