CALL US :1 (888)-4WAN-LAN

Patton Models 2084, 2085 & 2086 Interface Powered, RS-232 to RS-485 Interface Converter (with Handshaking)[2084]

Patton Models 2084, 2085 & 2086 Interface Powered, RS-232 to RS-485 Interface Converter (with Handshaking)

Patton Models 2084, 2085 & 2086 Interface Powered, RS-232 to RS-485 Interface Converter (with Handshaking)[2084]

$62.17
Quantity :

Features

  • Conforms to the EIA RS-485 Standard
  • Operates Asynchronously, Point-to-Point or Multipoint, over 2 or 4 Wires
  • Data Rates to 115,200 bps
  • Selectable RTS-CTS Delay
  • Selectable High-Low Impedance
  • Able to Operate with or without "Echo"
  • Carrier may be Continuous or "Controlled by RTS"
  • 50 drops in a multi-point environment
  • No AC Power or Batteries Required
  • Built-In Surge Protection - Standard
  • Model 2086 features optical isolation
  • Made in the USA — This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.

Overview

The Model 2084 high speed RS-232 to RS-485 interface converter supports async RS-232 data rates to 115.2 kbps over 2-wires. Passing one control signal in each direction, the Model 2084 can handle up to 50 terminal drops in a multipoint polling environment. The Model 2084 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. In addition, Silicon Avalanche Diodes provide 600 watts per wire of protection against harmful data line transient surges

The Model 2085 provides high speed RS-232 to RS-485 conversion over one or two unconditioned twisted pair. Otherwise, the Model 2085 has the same features and specifications as the Model 2084.

Model 2086 includes optical isolation along with the same set of features provided with the Model 2085. The Model 2086 requires an external power supply.

Highlights

Rack Mountable Units, Too!These rack cards each contain two converters, so you can fit 32 converters in a 19" rack.

 

Model

Specifications

  • Transmission Format: Asynchronous
  • Data Rate: Up to 115,200 bps
  • Range: Up to 9 miles (14.5km)
  • RS-232 Interface: DB-25, male or female (DCE/DTE switchable)
  • RS-485 Interface Options: DB-25, male or female; RJ-11 or RJ-45 jack; terminal block with strain relief
  • Control Signals: DSR turns "ON" immediately after the terminal raises DTR; DCD turns "ON" after recognizing the receive signal from the line; CTS turns "ON" after the terminal raises RTS.
  • RTS/CTS Delay: 0 msec or 8 msec
  • Carrier: The carrier is switch selected either continuous operation or controlled by RTS
  • Power: Draws operating power from RS-232 data and control signals; no AC power or batteries required.
  • Temperature: 32° to 122° F (0° to 50° C)
  • Size: 2.66" x 2.10" x 0.73" (6.8 x 5.3 x 1.9 cm)