CALL US :1 (888)-4WAN-LAN

Patton Electronics Model 1058 VDSL High Speed Data & Voice Modem

Patton Electronics Model 1058 VDSL High Speed Data & Voice Modem

Patton Electronics Model 1058 VDSL High Speed Data & Voice Modem

$440.12
Quantity :

OVERVIEW

The Patton 1058 VDSL Modem offers a cost-efficient and reliable solution for delivering full service integration over a high-speed, line sharing, symmetrical, 12.5 Mbps link. The Model 1058DV's line sharing capabilities enable users to work on the internet while simultaneously using the phone or fax machine. 

The Model 1058D is an economical solution to connecting peered 10/100Base-T Ethernet LANs; reaching remote PCs and equipment; or delivering last-mile ISP services-all at 12.5 Mbps! The Patton Model 1058 offers premium performance over your existing voice-grade telephone wire, eliminating the cost of installing new LAN grade cable or expensive fiber.

The Model 1058 VDSL Modem is compact, easy to install, and transparent to higher layer protocols. Simply connect the network equipment to the shielded Ethernet RJ-45F jack, the POTS/ISDN cable into the POTS/ISDN RJ-45 port, and the twisted-pair telephone wire to the VDSL RJ-45F jack or terminal block and you're ready to operate. The Model 1058 will auto-sense and configure for 10Base-T or 100Base-T as well as full or half-duplex Ethernet operation. A built in POTS/ISDN splitter provides a life-line phone link. No configuration is required! Whether you are looking to improve your increase the efficiency of your existing wiring infrastructure or delivering integrated services to your customer, the Model 1058 is the perfect choice. 

FEATURES

  • High-speed symmetrical 12.5 Mbps communications link
  • Extends Ethernet connections up to 4,500 ft
  • Easy 2-wire VDSL connection via built-in RJ-45 or 2-position terminal block
  • Integrated MDI-X switch to allow easy connection to any computer or LAN
  • Passes higher layer protocols and supports 802.1Q (VLAN tagging)
  • Line sharing with built-in POTS/ISDN splitter
  • POTS/ISDN life-line phone link
  • Automatic learning and aging address table
  • Five LEDs monitor power, VDSL link and status, Ethernet link and activity
  • Auto-sensing 10 or 100Base-T and full or half-duplex Ethernet operation
  • No configuration required!

APPLICATIONS

Ethernet Extension
Used in pairs, the Model 1058 establishes a high-speed, line sharing, symmetrical 12.5 Mbps voice and data link. The Model 1058 inter-connects two geographically separated LANs over a voice-grade twisted pair wire. Operation is simple: packets destined for the remote LAN are sent transparently, at full line rate, to the peered LAN. The Model 1058DV's built-in POTS/ISDN splitter allows users to simultaneously talk on the phone while surfing the WWW, downloading files, or receiving emails. 

SPECIFICATIONS

  • VDSL Interface: RJ-45 (pin 4= tip; pin 5= ring) and two-position terminal block (supports 19-26 AWG) 
  • Ethernet Interface: 8-position shielded RJ-45. Auto-sensing 10/100Base-T with half or full-duplex operation
  • POTS/BRI ISDN Interface: RJ-45 (pin 4=ring; pin 5=tip)
  • Protocol: Transparent to high layer protocols. Supports 802.1Q VLAN tagging
  • Modulation: QAM (Quadrature Amplitude Modulation)
  • Duplexing Method: FDD (Frequency Division Duplexing)
  • Frequency Range: VDSL 1-8Mhz; POTS/ISDN: 0-120kHz
  • Transmission: VDSL line rate: 12.5 Mbps; Data rate: 10 Mbps full-duplex
  • Surge Supression: VDSL maximum current surge: 20kA (8/20_s) gas tube
  • Front Panel Indicators: Power, VDSL Link and QOL, Ethernet Link and Activity status
  • External Power Supply Options
    • AC: 120VAC and Universal Power Supply (100-240 VAC)
    • DC: -48VDC, -24VDC, and -12VDC (optional upon request)
    • Compliance: FCC Part 15 Class A; EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC; CE Mark
    • Temperature: 32 to 122°F (0 to 50°C)
    • Altitude: 0–15,000 ft (4.5 km)
  • Humidity: Up to 90% non-condensing
  • Dimensions
    • Standalone: 1.5 H x 4.13 W x 3.75 D in. (3.81 H x 10.5 W x 9.53 D cm)
    • Rack card: 3.0 H x 0.83 W x 7.84 D in (7.6 H x 2.1 W x 19.9 D cm)
  • Weight
    • Standalone: 0.4lbs (.18kg) without power supply
    • Rack card: 0.3lbs (.14kg) with rear card