CALL US :1 (888)-4WAN-LAN

DCE 5204V-BM High Speed Extended Reach VDSL2 Bridge Modem 2Pack[DCE/5204V-BM-2PK]

DCE 5204V-BM High Speed Extended Reach VDSL2 Bridge Modem 2Pack

DCE 5204V-BM High Speed Extended Reach VDSL2 Bridge Modem 2Pack[DCE/5204V-BM-2PK]

$148.50
Quantity :

DCE 5204V-BM VDSL2 High Speed Extended Reach VDSL2 Bridge Modem 2Pack is perfect for Very High-speed Connectivity Internet Access, IPTV service applications, hospitality, Point-to-Point and MDU / MTU applications.

The DCE/5204V-BM is a single VDSL2 port modem equipped with four Ethernet ports by embedded 10/100Mbps Ethernet Switch. Compliant with ITU-T G.993.2 VDSL2 standard, the DCE/5204V-BM supports the highest rate of up to 100Mbps/100Mbps in VDSL2 Profile (30a) with a 6-band solution.

Since VDSL2 has the characteristics of faster rates over shorter distances, the DCE 5204V-BM provides the ideal architecture for Telecoms to use fiber optic lines as the backbone and a VDSL2 line as the last mile into the home or office.

VDSL2 operates over copper wires so that telecom operators can provide bundled services to end-users similar to those that cable operators offer. With outstanding throughput, the DCE 5204V-BM complements fiber networks in offering the best solution for delivering IPTV or home entertainment services.

The DCE/5204V-BM also supports both central office (CO) and customer-premises equipment (Remote/CPE) modes for back-to-back applications.

In addition to forwarding Ethernet packets between VDSL2 port and Ethernet ports, the DCE 5204V-BM also provides Hardware IGMP snooping for IGMP v1/v2 to facilitate IPTV services without interfering with other applications.

 

 

 

 

 

Key Features
  • Compliant with ITU-T G.993.2 VDSL2 Standard
  • VDSL2 Profiles: 8a/b/c/d, 12a/b, 17a, 30a
  • Band Plan 997 and 998 supported
  • Supports Back-to-Back (point-to-point) applications
  • Annex A, Annex B, Annex C supported
  • US0 Supported
  • OLR Supported
  • Ethernet packets over VDSL2
  • Integrated 4-port Ethernet Switch
  • DIP switch settings for CO and Remote (Point-to-Point / Bridging / LRE Applications)

 

Benefits

Standard-compliant to ITU-T G.993.2
The DCE 5204V-BM complies with the international standards and interoperates with other major/open chipsets. It supports multiple profiles (8a, 8b, 8c, 8d, 12a, 12b, 17a, and 30a); different band plans (997, 998, and proprietary) and multiple annex types (Annex A, Annex B and Annex C), by default factory settings to fit various requirements. Using the latest chip design technology, the DCE 5204V-BM consumes less power (less than 2 watt per VDSL2 port) and has shorter training time to get the device up and running.

Long Reach Ethernet (LRE) / Back-to-back / Point-to-Point Applications
In addition to using one DCE 5204V-BM to connect to ISP/Telco’s DSLAM for accessing Internet or video services, users can utilize a pair of DCE 5204V-BM for back-to-back applications. Theoretically the maximum length for Ethernet cable is within 100 meters. By using two 5204V-BM modems, users can have 100/100Mbps connectivity over a twisted-pair phone line up to 200 meters or longer. This capability can help users to bridge two distinct LAN segments in longer distance or to have surveillance service a little farther over existing twisted-pair phone cables.

Easy Installation
The DCE 5204V-BM is easy to use and easy to setup. Simply connect the hardware interfaces without the need for complicated configuration efforts, the device will synchronizes with a VDSL2 DSLAM (VTU-O) in auto-negotiated mode and allow users to access the Internet or watch IPTV almost instantly.

 

Features & Specifications

VDSL2 Compliance
• Compliant with VDSL2 Standard, ITU-T G.993.2
• VDSL2 Profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a and 30a
• Supports 997 and 998 Band Plans
• Supports Annex A, Annex B and/ or Annex C
• Upstream/Downstream connection rates 100/100Mbps
• OLR (On Line Reconfiguration), US0 Supported
• Supports Ethernet 802.3ah

Network Protocols and Features
• Transparent bridging
• Ethernet over VDSL (EoVDSL) Bridging
• IEEE 802.3/3u compliant
• Hardware IGMP Snooping for IGMP v1/v2

Management
• Simple management function via console port
• Firmware upgradable (on demand)

Hardware Specifications
Physical Interface
• VDSL: one RJ-11 connector
• DIP Switch: DIP4 for configuring RT/COT mode
• Ethernet: 4-port 10/100Mbps auto-crossover (MDI / MDI-X) Switch
• Console: PS2, for management function
• Power jack
• Power switch
Physical Specifications
• Dimensions: 7.09" x 4.72" x 1.57" (180mm x 120mm x 40mm)
Power Requirements
• Input: 12V DC, 1A

Operating Environment
• Operating temperature: 0 - 40 °C
• Storage temperature: -20 - 70 °C
• Humidity: 20 - 95% non-condensing

 
Application Diagram

ADSL Deployment scenario for VDSL2 using FTTx using the DCE 5204V-BM VDSL2 Modem

Deployment scenario for VDSL2 using FTTx and DCE 5204V-BM VDSL2 Modem

ADSL Back-to-back or Point-to Point connectivity using two DCE 5204V-BM VDSL2 Bridge Modems

Back-to-back or Point-to-Point connectivity using two DCE 5204V-BM VDSL2 Bridge Modems

 

 

When purchasing from this page you will receive two (2) DCE 5204V-BM High Speed Extended Reach VDSL2 Bridge Modems.

Recommended Product Add-on
We strongly recommend the following product to protect your network and investment.
You can click on any of the links below to view the product information, and download the 552-D2 User Guide.
Clicking on the link below will open a new window

Customers who bought this product also purchased